Chemplex-catalogue

More documents

Recommendations

Info

XRF SAMPLE CUPSSERIES 2100:DOUBLE OPEN-ENDED TRIMLESS SLEEVE XRF SAMPLE CUPSINTERNAL OVERFLOW RESERVOIRS, VENTED SNAP-ON CAPS, TRIMLESS SLEEVE THIN-FILMSAMPLE SUPPORT WINDOW ATTACHMENTSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMSee “Transfer Pipettes” forfilling XRF Sample CupsSnap-On Cap establishes a series of physical baffles that provide resistance to powderedsample withdrawal under evacuated conditions. Vent hole equalizes pressure differentialswithin the sample cup and sample chamber under helium flushes and vacuum operatingconditions.Cell integrates an Internal Overflow Reservoir for collecting thermally sensitive liquidsamples within the sample cup reducing the likelihood of inadvertent spillage into thesample chamber; serves as a filling level guide for uniformity of sample volume.Integrated flange on outer cell neck diameter physically defines the distance of TrimLessSleeve travel over the Cell during the thin-film sample support window attachmentprocedure; ensures reproducible sample cup assemblies and statistically accurate x-raydata.Extra wide TrimLess Sleeve envelopes extraneousthin-film sample support window material to eliminatetrimming excess and dealing with annoying staticprone clippings.Note: For best results, use SpectroMembrane Thin-Film Sample Support Carrier Frames.SPECIFICATIONS AND ORDERING INFORMATIONCat. No. Outside Diameter Max. Dia. Height Aperture Capacity, Sets/Pkgcc2132 1 1.24” (31.4mm) 1.36” (34.5mm) 1.15” (29.2mm) 1.04” (26.5mm) 9 * 1002135 2 1.35” (34.2mm) 1.46” (37.0mm) 1.16” (29.5mm) 1.10” (28.0mm) 11 * 1002140 3 1.57” (39.9mm) 1.70” (43.3mm) 1.17” (29.6mm) 1.41” (35.8mm) 19 * 1002143 4 1.57” (39.9mm) 1.61” (41.0mm) 1.17” (29.6mm) 1.41” (35.8mm) 19 * 1002145 5 1.76” (44.7mm) 1.86” (47.3mm) 1.14” (29.0mm) 1.59” (40.3mm) 22 * 1002146 6 1.76” (44.7mm) 1.86” (47.3mm) 1.32” (33.5mm) 1.59” (40.3mm) 22 * 1002195 7 1.71” (43.4mm) 1.57” (40.1mm) 1.50” (38.2mm) 1.77” (45.0mm) 22 * 100Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applicationsTMTrimLess is a trademark of Chemplex Industries, Inc.* Capacity is measured up to the start of the internal overflow reservoir1Cat. No. 2132 useable with Spectro XEPOS, iQ, iQ II and other systems of similar sample cup holder dimensions2Cat. No. 2135 useable with PANalytical MiniPal and other systems of similar sample cup holder dimensions3Cat. No. 2140 useable with manual Bruker S2 and S4 and other systems of similar sample cup holder dimensions4Cat. No. 2143 useable with automatic Bruker S2 with XFlash® Detector and S8 with FLEX loader5Cat. No. 2145 useable with PANalytical and other systems requiring 45 mm sample cups6Cat. No. 2146 self-centering sample cups are useable with Thermo Scientific Advant’X instrumentation systems7Cat. No. 2195 is an Internal Overflow Reservoir substitute alternative for Cat. No. 1095 useable with Rigaku,Panalytical Venus 200 and other instrument sample cup holders of similar dimensionsCatalog numbers 2146 and2195 are provided withintegrated vented Snap-OnCaps with knobs.
XRF SAMPLE CUPSSERIES 3100:SPECTROMICRO ®SAMPLE CUPSHOME UTILIZE “FUNNELSHAPE” SAMPLE CUP TECHNOLOGYQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMVented Snap-On Cap equalizes pressure differentials within the Cell andsample chamber to maintain a taut thin-film sample support plane.Cell interior integrates a FunnelShapesample chamber for introducingand containing powdered, solid or liquid sample substances. The largerconically shaped upper portion of the funnel allows and facilitates sampleintroduction. The lower cylindrically shaped spout of the funnel representsthe actual sample chamber and its diameter is expressed as the aperture.Select sample cup size by matching the aperture diameter to the volumeof sample available for analysis.The Collar is used to secure a thin-film sample support window substanceto the Cell and designed for acceptance by nominal 32 mm sampleholders.20 mm 15 mm 10 mm 6 mmCat. No: 3120 Cat. No: 3115 Cat. No: 3110 Cat. No: 3106See “Transfer Pipettes” forfilling XRF Sample CupsAssembled SpectroMicroSample Cup UsingFunnelShapeSample CupTechnologyCatalogNumberSurface AreaExposureDiameterSPECIFICATIONS AND ORDERING INFORMATIONSample ChamberVolumetricCapacityOutsideDiameterHeight(With Cap)IntegratedInteriorFunnelNumber of SampleCup Sets/Package*3106 6 mm (0.24“) 0.20 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003110 10 mm (0.39”) 0.50 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003115 15 mm (0.59”) 1.00 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003120 20 mm (0.79”) 5.50 cc 30.6 mm (1.20”) 23.0 mm (0.91”) N/A 100Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applications.® SpectroMicro and Chemplex are registered trademarks of Chemplex Industries, Inc.FunnelShape is a trademark of Chemplex Industries, Inc.• A set consists of a cell, vented cap and collarChemplex ® INDUSTRIES, INC.2820 SW 42 nd Avenue, Palm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX; Phone: (772) 283-2700; Fax: (772) 283-2774Email: sales@chemplex.comOn-Line Sales: http://www.chemplex.com
Page 1 and 2: XRF SAMPLE CUPSHOMETECHNICALREPRINT
Page 3: XRF SAMPLE CUPSQUICK REFERENCE CHAR
Page 9: XRF SAMPLE CUPSSERIES 1500:DOUBLE O
Page 13 and 14: XRF SAMPLE CUPSSERIES 1850:SINGLE O
Page 15: XRF SAMPLE CUPSSERIES 1935-OX:DOUBL

Chemplex-catalogue

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?