Chemplex-catalogue

XRF SAMPLE CUPSHOMETECHNICALREPRINT:“DisposableSample Cups forX-RayFluorescenceAnalysis”SAMPLE CUPSELECTIONGUIDEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSTRANSFERPIPETTESSAMPLE CUPACCESSORIESRoHSCOMPLIANTMICROPOROUSFILMSpectroCertified ® XRF Sample CupsChemplex Industries, Inc. maintains a design engineeringdepartment together with a contemporary equipped machine shopfacility. Chemplex products are manufactured “in-house” startingfrom the initial product conception, design, prototype, testing, andevaluation stages to finished inventoried products. In manyinstances, the machinery to make a product is not availablenecessitating the “in house” design and custom fabrication of theactual production equipment.The design of sample cups begins with an innovative idea for amethod of containing and handling liquid and powdered samplesubstances for x-ray analysis. Many Chemplex XRF Sample Cupdesigns and applications are classified as innovatively unique andhave been awarded intellectual property status with the USPTO.With a battery of injection molding machines and adjunctequipment in its manufacturing section, sample cups are:manufactured on a daily basis; subject to quality control at theproduction stage; packaged and labeled to avoid contamination;and inventoried under a protective environment to maintain theiroriginal quality and to assure prompt delivery.SpectroCertified® XRF Sample Cup Quality Starts with a Special FormulatedPolyethyleneChemplex XRF Sample Cups are injection molded from a proprietary high-density polyethylenespecially formulated for this application. The material is characterized with:• Compliance with RoHS Directive• Absence of “whitening” agents that may potentially influence x-ray data• Lubricity to facilitate the smooth and firm attachment of thin-film sample support windows• Physical characteristics for performance and resistance to thermal and irradiation exposure• Chemical resistance from contact with incalculable sample material substances• Low trace element impuritiesTypical Characteristics of SpectroCertified® Chemplex XRF Sample CupsTrace Analyte Impurities, PPM Melting Point, o C ( o F) Softening Point, o C ( o F)Ca, Mg, Ti, Al, P, Zn 130 (266) 123 (253)The extraordinary attention given to a special formulated plastic and maintaining consistency of its physicaland chemical properties is costlier than conventionally available plastics intended for genera purpose use.Chemplex XRF Sample Cups are unmatched in material composition and properties for their intended XRFscientific applications.® SpectroCertified and Chemplex are registered trademarks of Chemplex Industries, Inc.Made under one or more of patents; 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applications

SAMPLE CUPSIZE SELECTIONGUIDEHOW TO SELECT AN XRF SAMPLE CUP SIZEHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSTRANSFERPIPETTESSAMPLE CUPACCESSORIESMICROPOROUSFILMSelection of a sample cup begins with taking three measurements of the sample cupholding device provided with the x-ray instrumentation:1. Inside diameter2. Inside diameter of the aperture3. Maximum heightMatch up the sample cup holder measurements to the listing of XRF Sample Cups in“Quick Reference Chart”. The XRF Sample Cups are categorized into Series that havecommon sizes and features.Select the attributes and conveniences of the XRF Sample Cup that is most suitable forthe application.If there is still doubt about an appropriate fit, request free sample quantities.Measure Inside Diameter, A.Measure Inside Diameter of theAperture, B.Measure Inside Height, C.Note: Sample holder photographs are a courtesy of Bruker AXS.Chemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEXPhone: (772) 283-2700Fax: (772) 283-2774Email: sales@chemplex.comOn Line Sales: http://www.chemplex.com

XRF SAMPLE CUPSQUICK REFERENCE CHART for XRF SAMPLE CUPSXRF Sample Cup Dimensions, Attributes and Instrument CompatibilityHOMESAMPLE CUPSELECTIONGUIDETHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMXRF Sample Cups are available in a variety of dimensions and attributes. To match a sample cup tothe sample holding device (metal sample cup, rotating tray, slide platform, fixed stage, etc.) suppliedwith the instrumentation measure the inside diameter, height and aperture. The following genericsample cup in conjunction with the chart serves as a guide for selecting the most appropriate size. Theattributes of the various types of sample cups are also indicated to better serve the application.Reference to a Series constituting specific details of the selected sample cup narrows the selectionprocess. For more detailed information on any sample cup in a Series, simply click on the SeriesNumber.Series Cat. No. DiameterA1.23”1060(31.2mm)100013001065 1.23”(31.2mm)1070 1.54”(39.0mm)1075 1.50”(38.2mm)1080 1.68”(42.7mm)1083 1.69”(43.0mm)10851.68”(42.7mm)1095 1.71”(See 2195) (43.4mm)13301330-SE(Integratedthin-filmtrimmer)13401.21”(30.7mm1.53(39.0mm)HeightB0.93”(23.5mm)0.93”(23.5mm)0.92”(23.3mm)0.89”(22.5mm)0.80”(20.2mm)0.73”(18.6mm)0.80”(20.2mm)1.57”(40.1mm)0.93”(23.5mm0.91”(23.1mm)ApertureC0.97”(24.7mm)0.97”(24.7mm)1.20”(30.6mm)1.20”(30.6mm)1.44”(36.6mm)1.44”(36.6mm)1.44”(36.6mm)1.50”(38.2mm)0.96”(24.4mm1.27”(32.2mm)Max. Dia.DN/A1.83”(46.6 mm)1.84”(46.7mm)1.83”46.6mm)1.77”(45.0mm)N/AX-Ray EquipmentCompatibilityBruker, Jordan,Kevex, Metorex,Panalytical, Philips,Rigaku, Siemens,Spectrace, Spectro,ThermoARL, Asoma, Bruker,Jordan, Kevex,Metorex, Panalytical,Philips, Rigaku,Siemens, Spectrace,ThermoARL, Asoma, Bruker,Fisons, Jordan,Kevex, Metorex,Panalytical, Philips,Rigaku, Siemens,Spectrace, Thermo,SpectroSulfurAnalyzer SampleCups(Also See 1850)Rigaku,Panalytical Venus 200ARL, Asoma, Bruker,Fisons, Jordan, Kevex,Metorex, Oxfordd,Panalytical, Philips,Rigaku, Siemens,Spectrace, Spectro,ThermoSample Cup AttributesTrimLess Attachment ofThin-Film Sample Supportsby Use of ProvidedSleeves. Venting Provisionand External OverflowReservoir.Re-ClosableVentable Snap-On Cap, ExternalOverflowReservoir, Bead-to-Indent”Snap-On Ring Geometry.

XRF SAMPLE CUPSSERIES 1400:SINGLE OPEN-ENDED VENTABLE XRF SAMPLE CUPSPROVISION FOR ACCOMMODATING MICROSAMPLES AND ALTERNATE CHOICE OF INTEGRATEDTHIN-FILM SAMPLE SUPPORT WINDOW TRIMMERSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMCell integrates two puncturable ThermoPlastic seals for equalizingpressure differentials within the sample cup and sample chamber invacuum, helium flush or atmospheric pressure conditions. The offcenteredThermoPlastic seal is for micro sample ventingapplications.Collar pre-affixes a thin-film substrate to support evaporated droplets,micro powdered samples or small solids for thin-layered preparations.Snap-On Ring firmly secures a thin-film sample support window to thesample cup to form a wrinkle-free sample plane and leak-resistantseal. It also serves to envelope the micro samples by “sandwiching” inbetween the two thin-film materials.Cell Neck and Snap-On Ring incorporate the Chemplex “Bead-to-Indent” geometry to form taut thin-film sample support window planes.and effective seals.See “Transfer Pipettes” forfilling XRF Sample CupsAlternatively available in nominal 32 mm diametersample cups with integrated serrated edged Snap-OnRings that allow extraneous thin-film trimming closeto the sample cup. Order by catalog number followedby “SE”.Internal receptacle accepts a user provided capillarytube containing micro samples or a solid substanceor internal reference standard mounted on a solidrod. Inside diameter of the receptacle is 0.157” (3.98mm).SPECIFICATIONS AND ORDERING INFORMATIONCAT.DESCRIPTIONNO.1430 Single open end; ThermoPlasticSeal Venting1430-SE Snap-On Rings have integratedthin-film trimmer1440 Single open end; ThermoPlasticSeal Venting1440L* Extra long; Single open end forOxford Lab-X InstrumentsOUTSIDEDIAMETER1.21”(30.7mm)1.55”(39.3mm)1.55”(39.3mm)HEIGHT0.88”(22.3mm)0.94”(24.0mm)1.38”(35.1mm)APERTURE0.97”(24.5mm)1.27”(32.3mm)1.27”(32.3mm)Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applicationsThermoPlastic is a trademark of Chemplex Industries, Inc.CAPACITY,ccSETS/PKG9 10015 10025 100IMPORTANT: The provided Collar must clear the serrated Snap-On Ring when using the 1430-SE Sample CupsChemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX Phone: (772) 283-2700

XRF SAMPLE CUPSSERIES 1500:DOUBLE OPEN-ENDED XRF SAMPLE CUPSMICROPOROUS FILM, VENTED SAMPLE CUP CAP ATTACHMENT PROVISION AND ALTERNATECHOICE OF INTEGRATED THIN-FILM SAMPLE SUPPORT WINDOW TRIMMERSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMOne of two supplied Snap-On Rings allowMicroporous Film attachments to the upper Cell neckfor pressure equalization within the sample cup andsample chamber to maintain a flat taut thin-filmsample plane with applications requiring inert heliumflushes or vacuum.Uniquely designed Cell accepts Snap-On Rings oneither side. Upper outer flange indicates the top sideof the Cell for use when attaching Microporous Filmor uniquely vented Sample Cup Caps, 1600 Series.One of two supplied Snap-On Rings permit thin-filmsample support window attachment to the lower Cellneck and permits top sample filling. Snap-On Ringsutilize unique “bead-to-indent” geometry whenassembled to the Cell to form taut thin-film sampleplanes and effective seals against leakage.1540 XRF Sample Cupwith optionally availableMicroporous Film forequalizing pressuredifferentials within thesample cup and samplechamber.Alternatively available in nominal 32 mm diametersample cups with integrated serrated edged Snap-OnRings that allow extraneous thin-film trimming closeto the sample cup. Order by catalog number followedby “SE”.See “Transfer Pipettes” forfilling XRF Sample CupsXRF Sample Cup illustrated with optionally availableMicroporous Film for equalizing pressure differentialswithin the sample cup and sample chamber.1530 XRF Sample Cupwith optionally availableSample Cup Cap forequalizing pressuredifferentials within thesample cup and samplechamber.CAT. NO. DESCRIPTIONOUTSIDEDIAMETER1530 Double open endsSnap-On Rings have 1.22”1530-SE integrated thin-film and (30.9mm)Microporous Film trimmer1540 Double open ends 1.55”(39.3mm)SPECIFICATIONS AND ORDERING INFORMATIONHEIGHT0.94”(24.0mm)0.90”(22.9mm)APERTURE0.95”(24.0mm)1.22”(30.9mm)CAPACITY,cc• Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applicationsSAMPLE CUPCAP CAT. NO.IMPORTANT: When using 1530SE, Microporous Film must be used on the open end with the integrated flange.REMINDER TO ORDER THIN-FILM SAMPLE SUPPORTSChemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX Phone: (772) 283-2700Fax: (772) 283-2774SETS/PKG9 1630 10016 1640 100

XRF SAMPLE CUPSSERIES 1700:INTEGRATED SNAP-POST VENTING XRF SAMPLE CUPSINTEGRATED EXTERNAL OVERFLOW RESERVOIR AND ALTERNATIVE CHOICE OF INTEGRATEDTHIN-FILM SAMPLE SUPPORT WINDOW TRIMMERSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMSee “Transfer Pipettes” forfilling XRF Sample CupsVenting is performed by moving the integrated Snap-Post from side toside. This action ruptures the thermoplastic seal for equalizingpressure differentials within the sample cup and sample chamber invacuum, helium flush or atmospheric conditions.Integrated External Overflow Reservoir collects thermally sensitiveliquids having tendencies to expand.Collar pre-affixes a thin-film substrate to support evaporateddroplets or micro powdered samples for thin-layered preparations.Utilizing the unique Chemplex “bead-to-indent” geometry, Snap-OnRing firmly secures a thin-film sample support window to the samplecup to form a wrinkle-free sample plane and leak-resistant seal. Italso serves to envelope the micro samples by “sandwiching” inbetween the two thin-film materials.Alternatively available in nominal 32 mm diametersample cups with integrated serrated edged Snap-OnRings that allow extraneous thin-film trimming closeto the sample cup. Order by catalog number followedby “SE”.Available in 32 and40 mm DiametersSPECIFICATIONS AND ORDERING INFORMATIONCAT. NO. DESCRIPTIONOUTSIDEDIAMETER1730 Snap-Post Venting1730-SE Snap-On Rings have1.21”integrated thin-film trimmer (30.8mm)1740 Snap-Post Venting 1.54”(39.0mm)HEIGHT0.91”(23.2mm)0.94”(23.7mm)APERTURE0.97”(24.7mm)1.26”(32.0mm)Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applicationsCAPACITY,ccSETS/PKG7 10011 100IMPORTANT: The provided Collar must clear the serrated Snap-On Ring when using the 1730-SE Sample CupsREMINDER TO ORDER THIN-FILM SAMPLE SUPPORTSChemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEXPhone: (772) 283-2700 Fax: (772) 283-2774 Email: sales@chemplex.comOn Line Sales: http://www.chemplex.com

XRF SAMPLE CUPSSERIES 1850:SINGLE OPEN-ENDED SPECTROSULFUR ANALYZER SAMPLE CUPSINTEGRATED EXTERNAL OVERFLOW RESERVOIR AND VENTING PROVISION FOR X-RAY OPTICALSYSTEMS “SINDIE®” INSTRUMENTS AND OTHER SULFUR ANALYZERSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMSnap-On Ring is designed with a semi-sphericalbead on one end of the interior circumference thatcoincides with a semi-spherical groove on theexterior of the Cell neck. This “Bead-to-Indent”geometry is responsible for firmly securing a thin-filmsample support window in position to form leakresistant taut thin-film sample planes,Integrated External Overflow Reservoir collectsthermally sensitive fluid samples with tendencies toexpand.Puncturable ThermoPlastic seal provides ventingfor equalizing pressure differentials between theinterior of the sample cup and sample chamber.Note: For best results use SpectroMembrane® Thin-Film Sample Support Carrier Frames.See “Transfer Pipettes” forfilling XRF Sample CupsSPECIFICATIONS AND ORDERING INFORMATIONSulfur Analyzer Sample Cups for X-Ray Optical Systems “Sindie®” Instruments and Other Sulfur AnalyzersCAT.NO.DESCRIPTIONOUTSIDEDIAMETERMAXIMUMODHEIGHTAPERTURECAPACITYccSETS/PKG1850Thermoplastic SealVentingSPECTROSULFURANALYZER SAMPLECUPS1.69”(42.9mm)1.87”(47.5mm)0.77”(19.5mm)1.41”(35.9mm)13 100® Sindie is a registered trademark of X-Ray Optical Systems, Inc.ThermoPlastic and SpectroSulfur are trademarks of Chemplex Industries, Inc.Chemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX, Phone: (772) 283-2700 ■ Fax: (772) 283-2774Email: sales@chemplex.comOn Line Sales: http://www.chemplex.com

XRF SAMPLE CUPSSERIES 1900:DOUBLE OPEN-ENDED XRF SAMPLE CUPSTOP SAMPLE FILLING AND ALTERNATE CHOICE OF INTEGRATED THIN-FILM SAMPLE SUPPORTWINDOW TRIMMERS.HOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMDouble open-ended Cell facilitates sample introduction by filling from thetop end. Prepare multitude of samples cups with pre-attached thin-filmsample support windows prior to filling. Ideally suitable for non-volatileliquid and loose powdered materials in helium flush or atmosphericconditions.Collar pre-affixes a thin-film substrate to support evaporated droplets,micro powdered samples or small solids for thin-layered preparations.Snap-On Ring firmly secures a thin-film sample support window to thesample cup to form a wrinkle-free sample plane and leak-resistant seal.It also serves to envelope the micro samples by “sandwiching” inbetween the two thin-film materials.Cell Neck and Snap-On Ring incorporate the Chemplex “Bead-to-Indent”geometry to form taut thin-film sample support window planes andeffective seals.See “Transfer Pipettes” forfilling XRF Sample CupsAlternatively available nominal 32 mm diametersample cups with integrated serrated edged Snap-OnRings that allow extraneous thin-film trimming closeto the sample cup. Order by catalog number followedby “SE”.SPECIFICATIONS AND ORDERING INFORMATIONCAT. NO.DESCRIPTIONOUTSIDECAPACITYHEIGHT APERTUREDIAMETERccSETS/PKG1930 Double open ended1.22” 0.83” 0.97”1930-SE Snap-On Rings have integrated (31.0mm) (21.1mm) (24.7mm) 8 100thin-film trimmer1940 Double open ended 1.54” 0.84” 1.26”15 100(39.1mm) (21.5mm) (31.9mm)1940L** Double open ended 1.54” 1.40” 1.26”25 100(39.1mm) (35.6mm) (31.9mm)1 Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applications** Useable with Oxford Lab-X instrumentsIMPORTANT: The provided Collar must clear the serrated Snap-On Ring when using the 1930-SE Sample CupsREMINDER TO ORDER THIN-FILM SAMPLE SUPPORTSChemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX Phone: (772) 283-2700 Fax: (772) 283-2774Email: sales@chemplex.com On Line Sales: http://www.chemplex.com

XRF SAMPLE CUPSSERIES 1935-OX:DOUBLE OPEN-ENDED XRF SAMPLE CUPS AND VENTED CAPSFOR OXFORD ANALYZERSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMVented friction-fitting cap equalizes pressure differentials withinassembled sample cup and sample chamber for applications inhelium flush and atmospheric conditions; maintains taut thin-filmsample support planes for reproducible x-ray data.Integrated upper Cell flange physically prevents Cell fromuncontrollable retraction or protrusion from the lower edge of thealuminum sample holder. Averts re-preparations and ensuresreproducible x-ray data.Close manufacturing tolerances enable and facilitate insertion andparticularly removal from aluminum sample holder. Use with Oxfordx-ray analyzers requiring user L240 aluminum sample cup holderswith interior “O” ring seals.Note:For best results, use the larger diameters of SpectroMembrane Thin-Film Sample Support Carrier Frames.See “Transfer Pipettes” forfilling XRF Sample CupsSPECIFICATIONS AND ORDERING INFORMATIONCAT. NO.DESCRIPTIONOUTSIDEDIAMETERHEIGHTAPERTURECAPACITYccCAPSINCLUDEDSETS/PKG1935-OXReplacementCells andCovers forOxford CK-100ConsumablesKit, P/N 54-CK-1001.23”(31.2mm)1.51”(38.3mm)1.15”(29.2mm)17 100 100REMINDER TO ORDER THIN-FILM SAMPLE SUPPORTSChemplex ® INDUSTRIES, INC.2820 SW 42 nd AvenuePalm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEXPhone: (772) 283-2700Fax: (772) 283-2774Email: sales@chemplex.comOn Line Sales: http://www.chemplex.com

XRF SAMPLE CUPSSERIES 2100:DOUBLE OPEN-ENDED TRIMLESS SLEEVE XRF SAMPLE CUPSINTERNAL OVERFLOW RESERVOIRS, VENTED SNAP-ON CAPS, TRIMLESS SLEEVE THIN-FILMSAMPLE SUPPORT WINDOW ATTACHMENTSHOMEQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMSee “Transfer Pipettes” forfilling XRF Sample CupsSnap-On Cap establishes a series of physical baffles that provide resistance to powderedsample withdrawal under evacuated conditions. Vent hole equalizes pressure differentialswithin the sample cup and sample chamber under helium flushes and vacuum operatingconditions.Cell integrates an Internal Overflow Reservoir for collecting thermally sensitive liquidsamples within the sample cup reducing the likelihood of inadvertent spillage into thesample chamber; serves as a filling level guide for uniformity of sample volume.Integrated flange on outer cell neck diameter physically defines the distance of TrimLessSleeve travel over the Cell during the thin-film sample support window attachmentprocedure; ensures reproducible sample cup assemblies and statistically accurate x-raydata.Extra wide TrimLess Sleeve envelopes extraneousthin-film sample support window material to eliminatetrimming excess and dealing with annoying staticprone clippings.Note: For best results, use SpectroMembrane Thin-Film Sample Support Carrier Frames.SPECIFICATIONS AND ORDERING INFORMATIONCat. No. Outside Diameter Max. Dia. Height Aperture Capacity, Sets/Pkgcc2132 1 1.24” (31.4mm) 1.36” (34.5mm) 1.15” (29.2mm) 1.04” (26.5mm) 9 * 1002135 2 1.35” (34.2mm) 1.46” (37.0mm) 1.16” (29.5mm) 1.10” (28.0mm) 11 * 1002140 3 1.57” (39.9mm) 1.70” (43.3mm) 1.17” (29.6mm) 1.41” (35.8mm) 19 * 1002143 4 1.57” (39.9mm) 1.61” (41.0mm) 1.17” (29.6mm) 1.41” (35.8mm) 19 * 1002145 5 1.76” (44.7mm) 1.86” (47.3mm) 1.14” (29.0mm) 1.59” (40.3mm) 22 * 1002146 6 1.76” (44.7mm) 1.86” (47.3mm) 1.32” (33.5mm) 1.59” (40.3mm) 22 * 1002195 7 1.71” (43.4mm) 1.57” (40.1mm) 1.50” (38.2mm) 1.77” (45.0mm) 22 * 100Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applicationsTMTrimLess is a trademark of Chemplex Industries, Inc.* Capacity is measured up to the start of the internal overflow reservoir1Cat. No. 2132 useable with Spectro XEPOS, iQ, iQ II and other systems of similar sample cup holder dimensions2Cat. No. 2135 useable with PANalytical MiniPal and other systems of similar sample cup holder dimensions3Cat. No. 2140 useable with manual Bruker S2 and S4 and other systems of similar sample cup holder dimensions4Cat. No. 2143 useable with automatic Bruker S2 with XFlash® Detector and S8 with FLEX loader5Cat. No. 2145 useable with PANalytical and other systems requiring 45 mm sample cups6Cat. No. 2146 self-centering sample cups are useable with Thermo Scientific Advant’X instrumentation systems7Cat. No. 2195 is an Internal Overflow Reservoir substitute alternative for Cat. No. 1095 useable with Rigaku,Panalytical Venus 200 and other instrument sample cup holders of similar dimensionsCatalog numbers 2146 and2195 are provided withintegrated vented Snap-OnCaps with knobs.

XRF SAMPLE CUPSSERIES 3100:SPECTROMICRO ®SAMPLE CUPSHOME UTILIZE “FUNNELSHAPE” SAMPLE CUP TECHNOLOGYQUICKREFERENCECHART FORXRF SAMPLECUPSTHIN-FILMSAMPLESUPPORTSSAMPLE CUPACCESSORIESTRANSFERPIPETTESMICROPOROUSFILMVented Snap-On Cap equalizes pressure differentials within the Cell andsample chamber to maintain a taut thin-film sample support plane.Cell interior integrates a FunnelShapesample chamber for introducingand containing powdered, solid or liquid sample substances. The largerconically shaped upper portion of the funnel allows and facilitates sampleintroduction. The lower cylindrically shaped spout of the funnel representsthe actual sample chamber and its diameter is expressed as the aperture.Select sample cup size by matching the aperture diameter to the volumeof sample available for analysis.The Collar is used to secure a thin-film sample support window substanceto the Cell and designed for acceptance by nominal 32 mm sampleholders.20 mm 15 mm 10 mm 6 mmCat. No: 3120 Cat. No: 3115 Cat. No: 3110 Cat. No: 3106See “Transfer Pipettes” forfilling XRF Sample CupsAssembled SpectroMicroSample Cup UsingFunnelShapeSample CupTechnologyCatalogNumberSurface AreaExposureDiameterSPECIFICATIONS AND ORDERING INFORMATIONSample ChamberVolumetricCapacityOutsideDiameterHeight(With Cap)IntegratedInteriorFunnelNumber of SampleCup Sets/Package*3106 6 mm (0.24“) 0.20 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003110 10 mm (0.39”) 0.50 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003115 15 mm (0.59”) 1.00 cc 30.6 mm (1.20”) 25.3 mm (0.99”) Yes 1003120 20 mm (0.79”) 5.50 cc 30.6 mm (1.20”) 23.0 mm (0.91”) N/A 100Made under one or more of patents: 5,630,989; 4,698,210; 238,210; 4,665,759 and pending applications.® SpectroMicro and Chemplex are registered trademarks of Chemplex Industries, Inc.FunnelShape is a trademark of Chemplex Industries, Inc.• A set consists of a cell, vented cap and collarChemplex ® INDUSTRIES, INC.2820 SW 42 nd Avenue, Palm City, Fl. 34990-5573, USAContinental USA Toll Free: (800) 4-CHEMPLEX; Phone: (772) 283-2700; Fax: (772) 283-2774Email: sales@chemplex.comOn-Line Sales: http://www.chemplex.com