Cardan Shafts for Industrial Applications - Dana

Data sheet Standard companion flangesStandard companion flanges can be manufactured with cylindricalbore holes and face keyway (material C45; hardenedand tempered 750 – 900 N/mm 2 ) on request. For designsdeviating from the standard, e.g., oil pressure connection,conical bore, flat journal, and material, relevant drawings arerequired.u∅A∅ZL 1∅D∅dv∅HLPlease state with your order:Shaft size =Flange dia. A =mmI x H = number of holes x ∅ mmL = mmL 1 = mmZ = mmD = mmd = mmu = mmv = mmCardan shaft connectionDimensionShaft size∅ AI 2 ) x H 1 )∅ D maxmmmm687/688.15100 6 x 8,25 69,5687/688.20687/688.15687/688.20120 8 x 10,25 84687/688.25687/688.30687/688.25687/688.301508 x 12,258 x 12,25110,3687/688.35687/688.40687/688.35687/688.40687/688.45687/688.551808 x 12,18 x 12,18 x 14,110 x 16,1132,5687/688.65687/688.45687/688.55225 8 x 16,1 171687/688.65587.50587.50250 8 x 18,1 189587.55587.60285 8 x 20,1 213390.60390.65390.70390.75390.803153503904358 x 22,110 x 22,110 x 24,110 x 27,12472773083421. Tolerance + 0,2 mm(for 390.75 and 390.80,tolerance + 0,5 mm)2. Number of flange holes33