09 - Sea-Doo.net

More documents

Recommendations

Info

Section 09 PROPULSION SYSTEMSubsection 04 (REVERSE SYSTEM)Twin-Pump ModelsLoctite 2424.5 N•m(40 lbf•in)Loctite 24210 N•m(89 lbf•in)Loctite24287 N•m(62 lbf•in)12.7 N•m(24 lbf•in)4Loctite 242Loctite24259 N•m(80 lbf•in)632781.7 N•m(15 lbf•in)1F10J05STYPICAL09-04-2
Section 09 PROPULSION SYSTEMSubsection 04 (REVERSE SYSTEM)INSPECTIONCheck all moving parts and bushings for wear,straightness, corrosion and free movement. Replaceparts as required.DISASSEMBLYReverse Gate SupportFor additional information, refer to JET PUMP 09-02.Detach steering/shifter cables.Detach steering link rod from nozzle (twin-pumpmodels only).Detach reverse gate link rod from RH reverse gate(required even if you are working on LH side ontwin-pump models).F04J1WA 1TYPICAL1. Remove rearmost nutF04J2NA11. DetachRemove reverse gate support no. 2 (with gateno. 1), venturi and nozzle assembly from impellerhousing.NOTE: If you are removing parts on LH side(twin-pump models), the reverse gate link rodno. 3 may be kept with the reverse gate.Reverse Gate Link RodTwin-Pump ModelsTo detach reverse gate link rod no. 3 from LH reversegate no. 1, remove the rearmost nut and rotatelink rod. This gives access to reverse gateretaining screw.F04J1XA 2 1TYPICAL1. Rotate rod2. Remove screwRemove reverse gate to give access to the remainingscrew of link rod.Latching MechanismAll ModelsNote that the latching mechanism is installed onRH reverse gate on twin-pump models.Remove screw no. 4 to detach lever.09-04-3
Page 1 and 2: Section 09 PROPULSION SYSTEMSubsect
Page 6: Section 09 PROPULSION SYSTEMSubsect
Page 37: Section 09 PROPULSION SYSTEMSubsect

09 - Sea-Doo.net

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?