Supplement to the Canopy System Release 8 User Guide PMP 400
Supplement to the Canopy System Release 8 User Guide PMP 400
Supplement to the Canopy System Release 8 User Guide PMP 400
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
<strong>PMP</strong> <strong>400</strong> and PTP 200 Series<strong>Canopy</strong> <strong>User</strong> <strong>Guide</strong> <strong>Supplement</strong>10. Adjust downtilt as desired, perprevious calculations done duringPlanning. If any doubts, confirmdowntilt after <strong>the</strong> radio is operationalusing SMs in <strong>the</strong> field at selectedtest locations.=========================== end of procedure ======================1. Perform a parts check <strong>to</strong>ensure all parts are present.Procedure 3: Assembling a 4.9 GHz AP, and attaching <strong>to</strong> <strong>to</strong>wer2. Assemble unit per <strong>the</strong>instructions that come with <strong>the</strong>kit.Issue 3, January 2009 Page 32 of 45