Supplement to the Canopy System Release 8 User Guide PMP 400

More documents

Recommendations

Info

PMP 400 and PTP 200 SeriesCanopy User Guide SupplementProcedure 2: Assembling a 5.4 GHz AP, and attaching to tower1. Perform a parts check to ensure allparts are present.2. Assemble the upper bracket, per thediagram that comes with theantenna.3. Connect the radio to the antenna bysliding it into the captive space.Secure the radio to the antennausing the two bolts provided.4. Assemble the lower bracket on theantenna assembly.Although it may seem intuitive toattach both brackets to the tower orpole and then hang the antenna, itusually works better to have thebottom bracket already attached tothe antenna before climbing.5. Weatherproof the connector usingstandard practices, with waterproofwrap.Issue 3, January 2009 Page 30 of 45
PMP 400 and PTP 200 SeriesCanopy User Guide Supplement6. Use standard work andsafety practices fortower climbing, andconnect the upperbracket to a pole,mounting fixture, or thetower.7. Hang the antenna assemblyon the upper bracket8. Connect the lower bracketto the pole or tower, usingthe quick-connect systemprovided9. The quick-connect system allowseasy attachment and detachmentand adjustment without any loseparts.Issue 3, January 2009 Page 31 of 45
Page 2 and 3: PMP 400 and PTP 200 SeriesCanopy Us
Page 4: PMP 400 and PTP 200 SeriesCanopy Us

Supplement to the Canopy System Release 8 User Guide PMP 400

Create successful ePaper yourself

Delete template?

Save as template?