See the full range - Norville Group Ltd.

Functional, professional,industrial solutions and accessoriesEquipments Catalogue

contents4-56-7IndexWeco range and servicespage 7Functionnal,professional solutions& comparativedisplay8910111213141516Edge 310 Tracing, Centring and Edging DeviceEdge 350C Automatic Edger with integrated drillingE.3 Intelligent revolutionEdge 550 High range automatic edger with integrated drillingEdge 580 Designed for versatility and speedEdge 680 Fruit d’une expérience technologiqueShapeMaker Ideal solution for shape managementand modificationComparison tableFunctions displaypage 17Tracerand centringdevices18192021Trace 2 HC Intelligent tracingTrace 3 For a safe tracingCad 4 More than a blocking deviceCad 5 The advanced decentration and blocking systempage 23Industrial solutions& bevel explanations2425262728Optomove software Logistics solutions for labsLabControl Extended Lab Management SoftwareVerifier T2 Automatic Layout centring & blockingVM 2500 Freeform lens analyzerBevels Flexibility in creationpage 29Otherworkshopequipment3031Smooth I & IIErgonomic manual edger with one or two wheelsWorkshopAccessories36Accessoriespage 35

indexEdge 310 - page 8Edge 350 C - page 9 E.3 - page 10Edge 550 - page 11Edge 580 - page 12 Edge 680 - page 13ShapeMaker - page 14Trace 2 HC - page 18Trace 3 - page 19Cad 4 - page 20Cad 5 - page 21

Functionnalprofessionalsolutions89101112131416Edge 310Edge 350CE.3Edge 550Edge 580Edge 680ShapeMakerFunctions display

Professional solutionsE.3Intelligent revolutionREF WGBAWZAZWeco new compact edger is equipped with smalledging wheels.The small edging wheels, 90 mm in diameter,are ideal for high-curve frames. They also enablethe edging of all types of materials (CR39, PC, Trivex,Hi-index, glass).The superpolish edging wheel yields particularly brilliantresults for the polishing of bevel or rimless mountings.The grooves and angled drill holes (10°) can be usedto obtain jobs with outstanding finishing (holes and notches,1 to 6 mm in diameter, up to 20 holes per lens).The front and rear safety-bevel is also one of the essentialfinishing operations, as is a specific edging cycle forsuperhydrophobic topcoatings.The E.3 guarantees you protection against axis slippage duringall finishing phases.E.3 Technical DataWidth728 mmDepth600 mmHeight442 mmWeight75 KgThe multi-axis tracer precisely records the frame’s characteristics,its shape and its curvature.The cycle time is particularly short: 1 minute for both eyes.Thanks to the Shapemaker shape modification software,you can ensure comfort and satisfaction for your customers.Shapemaker enables you to produce custom jobs in just a fewclicks and to provide personalised service to your customers.The digital blocker combines on-screen viewing and easymanipulation of blocks, thanks to a unique handling system.The results are free of parallax and prismatic effects.Blocking is simplified, and block insertion is made easier,thanks to the error-proof slot and the possibility of viewing blockposition and insertion.See accessories pages 3810

Functionnal professional solutionsEdge 680Product of a unique technological experienceREF. 1148-0041-06 – Mineral / PlasticREF. 1148-0041-04 – PlasticTrue to Weco’s modularity principle, the new Edge 680is compatible with Weco’s wide choice of centeringand tracing devices thereby providing lab professionalswith the most extensive range of personalized finishingsystems.Edge 680: Features at a glance> Interface: Clear and Ergonomic> Finishing: Versatile and Modern> Bevels: Individual and Flexible> Edging: Safe and Precise> Design: Practical and FunctionalInterface: Clear and ErgonomicThe large and tiltable touch screen combines simplicity withmodern ergonomics. All available edging programs are directlyaccessible. The corresponding parameters are displayedon the screen and can be easily changed if necessary.For any given job both the left and the right eye are displayedsimultaneously. Furthermore, the parameters for the secondlens can be adjusted whilst the first lens is being processed.This saves eyecare professionals valuable time that they are ableto devote to their customer instead.Finishing: Versatile and ModernThe Edge 680 has a variety of fine-tuning options that imposeno limits. For example, grooving and drilling can be combined.Depending on the wheel configuration you can polish alsothe v-bevel. The front and rear chamfering of the edged lenscan be adjusted separately, according to requirements.The edger calculates a perfect groove that adapts to the curveof the lens and has versatile options for drilling. The extendedbeveling function for lenses with high base curves completesthe range of possibilities of this edging system.Bevels: Individual and FlexibleThe individual processing of the bevel is one of the Edge 680‘smany key features : the height of the bevel can be adjustedto match the thin frame groove thereby achieving perfect fit.It is also possible to reduce independently per section the rearof the bevel as required. This processing mode is based on theprinciple of the “tilted bevel system”. Here, the bevel is slightlytilted backwards to get a better grip on the groove of frameswith a high curve.Due to the small diameter of the diamond wheels an aestheticaland functionally flawless bevel is achieved particularly in the caseof high curve lens/frame combinations.Edging: Safe and PreciseThe optimal processing of a lens depends on many factors.Material, coating, lens type and frame design determinethe subsequent processing. Therefore four edging programsare available: standard, security, anti-slippage and ultra-securitymode. In these settings, all parameters can be combined andadapted accordingly. So you can be sure that both very slipperyand very thin lenses are treated securely by this edger.This device, designed and developed for high volume productionadjusts its speed according to the process, without losingthe optimal balance between productivity and finishing quality.Design: Practical and FunctionalAn edger must make life easier for the optician. Thereforethe Edge 680 was conceived with a small footprint, which enablesthe easy integration of the Edge 680 into smaller workshops.To organize the workflow better, a tray was incorporated into thedesign, where Blocks and lenses can be placed, and in addition,the Edge 680 includes an integrated barcode reader that is ableto scan job trays directly. This will help to maintain, even in a highvolume situation, the most accurate control over his work.Edge 680 technical dataHeightWidthDepthWeight603 mm599 mm (Footprint: 527 mm)538 mm (Footprint: 476 mm)91 KgDescription Order Number Mineral Plastic Trivex Grooving Chamfering Drilling High-Curve PolishingEdge 680 Min. / Pla 1148-0041-06 • • • • • • • FlatEdge 680 Only Pla 1148-0041-04 • • • • • • •See accessories pages 4013

Functionnal professional solutionsShapeMakerA perfect solution for the administrationand modification of lens shapesPN 1139-0001-01 ShapeMaker Current LoopPN 1139-0001-02 ShapeMaker OMAThe ShapeMaker is a WECO tool for the modernand progressive optical workshop, consisting of aninterface box, software and connection cables.The ShapeMaker interface box is connected to the CurrentLoop (CL) system and to a PC. The function of your currentedging system can easily be extended without havingto change/modify the existing configuration.The ShapeMaker software is installed in a user-supplied PC.Once the connection with the system is completed,the performance of your edging system can be extendedwith the following functions:> Lens shape administration> Lens shape modification> Management of drill hole coordinates.Lens shape administrationThe ShapeMaker can store as many shapes as required.It allocates a shape to a brand or model designation, therebymaking possible the memorising of frame collections.A lens shape can be assigned to a customer, and this is used inorder to find the correct and right shape for the specific customer.The shape of the lens, the manufacturer or the customer canbe located very quickly and easily using a built-in search function.> Storage of shapes> Assigning a lens shape to a brand /model> Assigning a lens shape to a customer> Search function.Lens shape administrationLens shape modificationThe ShapeMaker has a shape modifier to change the shapeof a lens for rimless production as follows:> Lower part of the lens> Upper part of the lens> Nasal part of the lens> Temporal part of the lens.The modified shape can either be overwritten or storedwith a new description.Drill holes managementThe management of drill holes, in conjunction with a lens shape,is simplified with ShapeMaker. It can export the drill hole dataor it can assign them to other jobs, thus simplifying the adaptationof modified shapes to existing frames. Drill hole coordinatescan be assigned from the boxing centre or as the distance fromthe lens edge.Lens shape modificationPC requirementsWindows 7, Vista, XP SP3, 2000 SP4.ShapeMaker technical dataWidth105 mmDepth130 mmHeight55 mmWeight0,4 KgManagement of drill hole coordinates14

Comparison tableDisplay of compatibilityEquipment connection possibilities between older modelswith most recentCentringEdge 310 Edge 350 C Edge 455 Edge 550/580 Edge 650 Edge 680CL-OMA-Box CL-OMA-Box CL-OMA-BoxCad III • • • • • •CL-OMA-BoxCad 4 • • • • • •CL-OMA-BoxCad 5 • • • • • •TracingCL-OMA-BoxCL-OMA-Box+ ShapeMakerTrace 2 HC • • • • • •CL-OMA-BoxTrace 3 • • • • • •SoftwareShapeMakerMini HostShapeMaker • • • • • •OMA-CL BOXBox to connect new and former equipmentsPN 1144-0011-01 (CL box with ShapeMaker)Examples:> To connect a Trace II to a Edge 350 compact system.> To connect a Cad III with an Edge 550 system.15

Comparison tableFunctions displayFunctionsEdge 310 Edge 350 C Edge E.3 Edge 550 Edge 580 Edge 680Drilling • straight • oriented • oriented • oriented • orientedGrooving - • • • • •Front safetybevel- • • • • •Rear safetybevel-• • • • •Polishing• rimless and bevelpolishing dependingon the version• • •• bevel and rimlesspolishing dependingon the version• bevel and rimlesspolishing dependingon the versionHigh curve - - - - • • option16

Tracerand centringdevices18192021Trace 2 HCTrace 3Cad 4Cad 5

TracersTrace 2 HCHighest quality technologyfor high base curvesPN 1114-0511-31Precise Tracing as a basis for precise Edging.The quality of the edging result of a spectacle lens is directlyrelated to the tracing of the frame. Due to the continuouslychanging styles in fashion and in frame materials, the demandson scanning increase. On the one hand frames should not bedistorted, on the other hand the tracing stylus must always stayinside the frame groove. Consistent tracing pressure, basedpurely on gravity force, makes the Trace 2 HC the most accurateand precise tracer.The fast growing remote edging segment requires the mostreliable and precise tracer. The Trace 2 HC consistentlyand precisely captures not only the shapes of frames, patternsand demo lenses fully automatic, but lets you replicate the resultstime and time again. Frames are traced using threedimensionaltechnology, which takes into account the curve and(tilt or angle) of the frame and detects the width o the bridge –even for extreme shapes. And of course, data transfer toyour host software and software of different lens manufacturersis standard.Intelli-StylusThe solution for high base curvesFor the most highly curved frames, to remain accurate is a bigchallenge. Weco took its already proven technology to thenext level – The Trace 2 HC. The Intelli-Stylus, due to our uniquepatented Floating Technology reproduces the most extremeshapes, even for highly curved frames and shallow grooves.Finally a technology that easily lets you trace both sidesof a high-base curve frame.> Trace both sides of frames with high base curves> Automatic detection of the bridge size> Stability due to double guided stylus> Consistent tracing pressure minimizes distortion.Trace 2 HC technical dataWidth200 mmDepth340 mmHeight185 mmWeight4,5 KgAdvantages at a glance> Trace both sides of frames with high base curves> Tracing of small b-sizes down to 17 mm> Reliability and stability based on long time experience> Replicability due to self-calibration> Proven clamping technology for delicate frames> Small footprint> Low maintenance> 3D OMA Protocol for Data transmission> Connectivity to all Weco equipment.See accessories pages 4518

TracersTrace 3Precise and secure tracingPN 1136-0001-01Straight-forward operation and safe handling> The frame can be inserted at will because frame alignmentwill be done by the manual lens clamping> The frame is not distorted as tightening is with constantpressure> Vertical and horizontal alignment of the frame withoutthe necessity for manual adjustment> Nosepiece for perfect positioning of the frame in the tracer> Straightforward operation through logical user guidanceand easily understandable icons> Perfect operator support through meaningfuland clear help menus on the current task.Tracing> Tracing program for plastic and metal frames for perfect fitting> For metal frame: groove determination for exact fitting precision> Tracing on both sides, right only or left only> In the case of one-sided tracing, you are promptedto input the width of the bridge> 3D tracing and determination of the groove angleand bevel length> Automatic calculation of bridge width of the frame,box measurement and the circumference of the lens> Automatic recognition and external tracing.Security from adjustable tracing speed> Adjustable tracing speed for difficult frames> If the tracer jumps out of the groove, Trace 3 remountsit automatically and reduces the tracing speed> Three tracing speeds quick, slow, very slow (only automatic).> The Shape can be altered inside the Tracer with the Toolfor Shape Modification.Output of Measurement Results> Clear, graphic TFT colour display with wide viewing angle> Graphic display of 3-D tracing data during the tracingprocess for direct check> Graphic 2-D presentation of both sides and displayof the measurement values for comparison> Graphical superimposition of the right and left glass shapein 2-D> Display of glass contraction (z co-ordinates) in the display> Display of bridge widths, box dimension for disc heightand length, circumference and curve of the lens contraction.Contour accuracy and precision when tracing> Internal calculation of the 3-D tracing data for preciselytailored data records for processing on the edger> Precise and stable accuracy in fitting through size correctionof the lens taking into consideration the groove angle and depth> Possibility of decision: use of the independent data from bothsides or mirror-imaging one side, e.g. if one side is bent> Efficiency through the elimination of superfluous user steps> Regular calibration.Trace 3 technical dataWidthDepthHeightWeight310 mm385 mm203 mm9 Kg1 Start screen 2 Display of glass contractionduring tracing3 3D display of form 4 Superimpositionof glass shapesChanging the shape - in seconds> Modifier Function allows alteration of the shape dimensionin width, height or just in the lower part of the frame(for multifocal lenses).See accessories pages 4619

Centring devicesCAD 4The new standard for decentrationPN 1146-0011-01 Cad 4 OMAPN 1146-0011-02 Cad 4 with current loop extensionThis new semi automatic centring and blocking systemoffers you, advantages like speed and ease of usethat Cad III customers have appreciated throughthe years, plus new features made available by the useof new technology.Optical Trace - tracing can be so easy and secure> Advanced video processing system for precise shaperecognition> Fully automatic detection of lenses with drilling coordinates> No distortion of the shape due to mechanical pressureor force> Step by step detection so the user can easily confirmor the correct the layout> Unique Drill Hole Recognition allows you to reviewand alter the coordinates, if necessary> Zoom Function offers the best accuracy in positioningof drill hole coordinates and diameters.Comfortable and easy to use> Easy access to the blocking and optical tracing area for rightand left handed people> Ergonomic hand-rest for the layout phase is included in frontof the layout zone> The blue-light illumination automatically adjusts to the tintof the lens and the external light level to increasethe detection rate for the smallest details of your lenses.Administration of your Drill Holes> Manual control of hole positions and characteristicsone-by-one or in groups> Holes or slots can be added, moved, disguarded,or have the diameter changed> Blind holes can be added, drilling angle can be chosen> Up to 20 hole coordinates or 10 slots to fit every frame> Drilling Coordinates can be easily transferred from one shapeto another with respect to the new dimensions.Changing the shape – in seconds> Modifier Function allows alteration of the shape dimensionin width, height or just in the lower part of the frame(for multifocal lenses)> Drill holes are re-positioned automatically in two wayshorizontally and three ways vertically to enable the bestposition of the shape into the Frame.Shape and frame library> A huge memory of 2048 shapes with drill data or the framememory of 512 jobs is included into the Cad 4> Just a tap on the screen and a comprehensive databasewith much information about the frame appears> Details like manufacturer, model name and Customer namecan be used as sort criteria.> A 1:1 preview is available for every shape.Layout benefits you can count on> Magnified image of the lens and layout increases accuracyduring centring> Clear, large LCD screen reduces operator fatigue> Automatic blocking guarantees a precise blocking pressure> Layout Modes for all types of lenses can be easily chosenor are presented automatically if working with an externalOMA Host.Cad 4 technical dataHeightWidthDepthWeightVoltage575 mm330 mm304 mm15 Kg230 V / 115 V - 50 Hz / 60 HzSee accessories pages 47_4820

Centring devicesCAD 5The advanced decentrationand blocking systemPN 1138-0011-01 Cad 5 OMAPN 1138-0011-02 Cad 5 extension current loopOptical Trace functionalityTracing is the first step in the workflow of lens manufacturing andhistorically this measurement has been performed with a Tracer.Optical Trace functionality offers the possibility of measuring theshape of a pattern or cut lens without a Tracer. The Optical Tracefunction no longer employs a mechanical stylus but instead usesa digital camera for measurement ready to be processed.The fast operation of Optical Trace and the less mechanicaldistortion of the frame and lens results in increased productivity.> For lens shape measurement> For drill hole detection> Fast operating time of 12 seconds> Accuracy increases due to less operator-induced mechanicaldistortion> Square shapes and bent shapes are to be perfectlyrepresented by Cad 5.Drill-hole identificationWhen manufacturing rimless spectacles the technicianmust locate the drill-hole positions. With the Cad 5 drill-holecoordinates are easily located using optical trace functionalityand drillhole identification. As soon as Optical Trace is activatedthe drill-holes are located and displayed on the screen.Additional holes and slots can be added or removed or evenvaried in dimension.> Automatically finds holes and slots in the lens> Precise positioning due to zoom function> Manual adjustment of holes> Operator can add, move and remove holes or slots> Operator can increase or decrease holes’ diameter> Blind holes can be added> Positioning accuracy within 5/100 mm.Modifier softwareA shape modification for the rimless lens is often requestedby the customer. Now you can simply say, “No problem,we have the solution!” Using Cad 5’s modifier, shape modificationbecomes reality. An added benefit of this advanced functionis to improve the processing of progressive lenses.The Modifier is a special function to adapt the lens shapeof rimless spectacles.To do so, several programs can be applied to adjust:> Half height, low part of the lens - for progressive lenses> Height only> Width only> Height with width adaptation> Width with height adaptation> Circumference radius length.CentringCentring of the lens is achieved automatically by built in powermeasurement. When processing a single vision lens, the Cad 5performs a lens optical analysis to detect the optical centreand axis identification. With bifocal lenses, the lens image analysisis performed by determining the near vision segment.Progressive lenses are processed by identification of the printings.The centring of Cad 5 is briefly summarised:> Centring of any type of lens> Quick identification of the centring references> Automatic recognition of any printings> Instantaneous and automatic centring> Comparison of the lens diameter to the requested shape> Power identification for single vision lenses with an accuracywithin ± 0.125 D.BlockingHaving centered the lens, the block is applied by the integratedblocking unit. Cad 5 employs an advanced electromagneticblock system to ensure the block is held securely in the blockholder, providing very high blocking accuracy.> Blocking of any type of lens> Electromagnetic block for perfect blocking.Your benefit by progress> Optical Trace for fast and precise shape detection> Automatic drill hole identification with higher productivityfor rimless spectacles> Modifier to modify lens shape for rimless spectacles.Your benefit from profitability> Increase of profitability due to less operator mistakesand damages> Less manual operations and manipulations> No need of a lens-meter to identify the optical lens centreand axis.See accessories pages 48_4921

Centring devicesCad 5 technical dataHeightWidthDepthHeight of glass retainerWeight660 mm320 mm450 mm240 mm38,8 KgMeasurement range for dioptre measurementSphere- 6 dpt. to + 6 dpt.Cylinder0 à - 6 dpt.Cylinder shaft 0 - 180°Prism0 - 6 cm / mBasis 0 - 360°Accuracy of Power0,125 dpt.MeasurementRaw lens dimensions Max / min diameterMax / min marginalThicknessAccuracy of detectionAccuracy of blocker80 mm / 45 mm20 mm / 0,5 mm0,3 mm0,15 mmProcess periodSingle-focus lensBifocal lensProgressive lensData input and handlingTotal period for onespectacle lensInterfacesWecoRS23220 s10 s10 s15 s45 - 65 sWECO CL interface, compatiblewith other WECO interfacesSerial interface RS232,data protocol accordingto OMA-Standard1-2-3 Optical Trace detectionof shapes3 Zoom effectSee accessories pages 48_4922

Industrialsolutions & bevelexplanations2425262728Optomove softwareLabControlVerifier T2VM 2500Bevels

Industrial solutionsOptomove softwareLogistic solutionsfor laboratoriesThe new solution for logistics in the optical industry.The system WECO Optomove, in combination withWECO LabControl software, allows very flexible solutionsfor any in house transport and controls of industrialproduction for optical products around spectaclesand lenses.Shuttles, carrying the jobs with lenses, are moving on a monorailsystem, which allows very economic, flexible and intelligenttransportation solutions.Weco Optomove can connect all work stations for lensproduction and lens glazing facilities.The integration into Weco’s own glazing machinery, for examplethe Edge 990 Blockless System, is very simple and efficient.There are no continuous moving belts which create noiseor transport dirt. The shuttles move smoothly, with no jerking,only when motion is requested.Main advantages of Weco Optomove.> High flexibility> Low power consumption> No continuously moving belts or chains> Low maintenance costs> Reduced noise level> Clean environment.Weco Optomove is suitable for:> Surfacing labs> Finishing labs> Assembling areas> Lens stock> Shipping department> Intelligent shuttle> Target address programmed into shuttle> Local intelligence in routing switches> Fail safe routing> Transportation with no jerking> Number of jobs in process is reduced> Small footprint> Link to Weco LabControl for profiling of joband workstation characteristics.Services provided:> Planning> Layout design> Integration> Programming> Installation> Maintenance> Software applications.24

Industrial solutionsLabControlHigh tech software solutionfor labsLabControl is a high power lab management softwarefor lens manufacturing and finishing labs. It is suitable fora wide range of applications, from companies generatinga few jobs a day to those producing many thousandsof jobs per day.It is fully scalable, from applications with a single edger,up to major labs with a hundred machines and automationconnected.This flexibility is possible because the system is basedon a Microsoft MS SQL server database. This is an effectivecombination for high speed data processing, with a high levelof data safety and system availability. These features are achievedby the client – server structure of OS databases and programs.LabControl is available in two editions:LabControl LE and LabControl Advanced.LabControl LE (Limited Edition)Features of LabControl LE:> Standard version> Supports to 8 serial ports> MS SQL Database (MSDE data base engine included)> Unlimited number of jobs (depends on hard drive size only)> Basic job administration> Permanent shapes library including drill data> Supports 8 serial ports to connect hardware> Interfaces to all WECO equipment, current or former> OMA compliant interface> Interfaces to barcode reader equipment> Job entry via network from host computer(ODBC link to the database)> Job entry via email to order lenses includingremote edging function> Manual job entry inside the lab> Basic statistic functions> Production status> System parameter administration> Customer / shop administration> Job ticket printing.LabControl AdvancedAdvanced features, additional to the LabControl LE functions:> Advanced version> Supports 8 serial ports> Surfacing module (e.g. LOH generators supported)> Job tracking> Stock management for finished lenses> Stock management for blanks> Lens / blank order> Delivery notes> Invoicing> Pricing> Management Information System MIS (advanced statistics).Connectable hardware units:> WECO Tracer> WECO Cad II, Cad III, Cad 4, Cad 5> WECO Verifier Pro, Turbo, Turbo 2> WECO Edger via Polling Card> WECO Edger via OMA-interface> WECO Edge 330, Edge 350, 550, Edge 580> WECO Edge 852, Edge 862 VI, Edge 890 lab, Edge 950,Edge 955, Edge 990> Barcode scanner> OMA clients> LOH blocker (advanced version only)> LOH generator (advanced version only).For adapted solutions Software and hardware requirementsplease contact us.25

Industrial solutionsVerifier T2High-tech solution integratingcentring device and lensmeterMore than 50 jobs per hourPN 1130-0013-01The Verifier Pro Turbo 2 is a high-tech product solutionintegrating both the centring device and lensmeter.In the operating sequence, it is no longer necessaryto mark spectacle lenses on the lensmeter, as the taskof measuring, centring and blocking spectacle lensesis performed in an automated operating sequence.Key parameters and technical specifications.Your benefit by progress> Operation is easy to learn> The procedure is automatically controlled> The spectacle lenses are verified accordingto user-set tolerance tables.Your benefit from profitability> Fewer operating steps> Shorter processing periods> Less rejects> Higher precision> High reliability.Smart Cutout> Smart cut out function adapts centring in case lensesare too small according to tolerances tables.Technical dataHeightWidthDepthWeightHeight of glass retainer655 mm219 mm385 mm20 kg182 mmProcess periodSingle-focus lensBifocal lensProgressive lensTotal period for one spectacle lensDurée totale pour un montage20 s20 s20 s10 s60 sTechnical limitsMeasurement rangeSphere-12 / +12 dptMeasurement Cylinder-6 / + 6 dptCylinder shaft 0 - 180°Prism0 - 6 cm / mBasis 0 - 360°Addition0 - 3,5 dptRaw lens dimensionsMax / min diameter85 mm / 40 mmMax / min marginal thickness20 mm / 0,5 mmAccuracy of detection0,2 mmBlock range from lens centreHorizontal-20 / + 20 mmVertical-15 / + 15 mmAccuracy of blocker+ / - 0,1 mmInterfacesWecoRS232Ethernet TCP/IP1 Insertion ofspectacle lensWECO CL interface,compatible with other interfacesSerial interface RS232, data protocolaccording to OMAStandardUSB two USB interfacesOMA (VCA) compatible protocol2 Insertion of block 3 Spectacle lens afterblocking processSee accessories pages 49_5026

Industrial solutionsVM 2500Freeform lens analyzerProcess controlThe VM 2500 for Freeform allows you to precisely inspectany lens and in particular freeform progressive lenses.The freeform function makes it possible to inspectthe lens and to compare it to the theoretical map providedby the lens designer.The VM 2500 for Freeform is a high precision lensanalyzer based on the PowerMap (Hartman Wavefront3D Technology).This unique technology:> Provides real-time mapping measurement.> Over 1,000 measured points.> High precision.> PowerMap TM of the entire lens.The VM 2500 for Freeform includes state-of-the-artProcess controls:> Compare the theoretical and the processed lens(based on the Freeform XYZ file)> Connectivity with Rx servers (leading products)> One-button operation> Quality criteria, which can be used for Go/NoGo decision.Three Easy Steps:1. Upload reference lens, by using the XYZ progressive surface2. Measure the Freeform lens3. Compare theoretical lens to actual lens.27

BevelsBevelsSome explanationsFlexible creation of bevelsAfter a short rough-grinding cycle, the lens bevel is processedoptionally as flat bevel, free-floating V bevel, manual V bevelor computer-controlled 3D V bevel. To control the bevel,its positioning is graphically displayed on the colour screen.> Free-floating bevel> Manual V bevel> Computer-controlled 3D V bevel.Free-floating bevelIn free-floating mode the bevel reproduction, during the firstrevolution of the grinding wheels, is automatically memorisedand all further revolutions, including re-finishing operations,are computer-controlled. This process drastically improvesthe bevel quality on thin lenses and extreme shapes.Manual V bevelThe manual V bevel option is used if you wish to adapt the bevelposition according to specific requirements, i.e. that the lensfits into a fancy frame.Computer-controlled 3D V bevelIn 3D V bevel mode, the lens geometry is measured duringthe rough-grinding cycle. Afterwards, the bevel is groundcomputer controlled.For the computer-controlled 3D bevel, a range of automatic beveloptions exist: Auto-Bevel, Percentage Curve or positioningof the bevel in relation to the front or rear surface of the lens.> Auto-Bevel> Percentage Curve> Positioning of the bevel in relation to the front or rear surface> Miniature bevel.70 %‐ 0,5 mm‐ 0,2 mm‐1 2 3 4Auto-BevelAuto-Bevel mode is an automatic option that positions the bevel,taking into account the curvature of the spectacle frame and lens.It is often used to process lenses that are difficult to adapt.Percentage CurveThe Percentage Curve option positions the bevel accordingto a direct ratio of the lens edge thickness and curvature.This option can be used for all lenses in the normal range.Positioning of the bevel in relation to the front or rear surface.The bevel is applied at a defined distance to the frontor rear surface of the lens.Miniature bevelAn adjustable miniature bevel can be employed for usein spectacle frames with a smaller groove depth.28

Otherworkshopequipment3031Smooth I & IIWorkshop

Professional Workshop solutionsSmooth I & IIErgonomic manual grinding machinewith one or two grinding discsPN 1017-0020-00 Smooth - 560PN 1116-0021-01 Smooth II - 590 - Finishing wheelPN 1116-0021-02 Smooth II - 590 - Roughing / finishingPN 1116-0021-32 Smooth II - 590 - Finishing / polishingWECO Smooth IIErgonomic manual grinding machinewith one or two grinding discsThe Smooth II is predestined for use in a workshopor at training facilities. It can be optionally equipped with oneor two grinding discs for rough grinding, fine grinding, chippingedges and polishing and always offers the optimum solutionfor your specific requirements due to its diversity.Two discs requiring with minimum spacerequirements> Minimum space requirements by low device width> Therefore large working areas> Large grinding discs (Ø 150 mm)> Discs with groove and radius.Working with dry hands> Hand rest beyond the wet area> Safety lever with automatic switch ON/OFF function> Display of operational status.Integrated water system> Optimum water supply and quick water outlet> Simple water change> Optionally with direct water connection> Prevents oxidation of high-quality grinding disc, even longstandstill periods.Disc combinationsSmooth II / Smooth ISmooth IIGrinding disc combination 01 32 02Rough grinding disc width 25 mm•Fine grinding disc with bevelwidth 25 mm• • •Extra-fine grinding disc with grooveWidth 25 mm•Diamond polishing disc(silky matt effect) Width 25 mm•Fine grinding disc with grooveWidth 25 mmSubject to changes within the scope of technical.Smooth I•WECO Smooth ITraditional manual grinding machinewith one grinding discA diamond disc, developed by WECO especially for aftertreatment, features the advantages of two discs:one wide flat track, one diamond facette groove and onerounded working edge.This disc allows you to chip edges without any problem or grindflat, tapered and special facettes even if you are processingminus lenses with high dioptres.> High grinding performance, because speed and discconstruction are optimally harmonised.Benefit from practical details for more efficientworking> User- and maintenance-friendly, as no greasing or lubricatingnecessary> Independent of connection to water supply by integratedeasily accessible cooling system.See accessories pages 5030

WorkshopTank (60L) with pumpPN S130067For closed circuit use.Big capacity 60 L.3 levels of filtration, perfectly adapted to the edgingeven large amounts of polycarbonate.Easy cleaning.First level of filtration (drawer) accessible.Drain valve allowing tank emptying without moving.Protective plastic film.Water pump holderwith rollersWater pump is then easier to move.Pump alone(single unit)Filtration Tank (20L)PN S180003Can be used with most existing machines:- Capacity 20 L.- 1 level of filtration.- Protection plastic film.20 L filtering tankg for use on the water network:- Without pump.- Compatible with all Briot edgers.Polyethylen protection bag(single unit)Polishing unitPN 67 60 016Polishing unit for polishing and sanding2 rotation speeds: 1 400 and 2 800 tours / mn> cloth disk> flannel disk> red polishing paste> yellow polishing paste> white polishing paste.Dimensions: L 460 x H 200 x P 220 mmWeight: 8.5 kgVoltage: 220 V / 240 HzPower consumption: 300 W31

WorkshopDM3 DrillPN 68 00 011The DM-3 Lens Drilling Machine can quickly drill all current lensmaterials, polycarbonate, Trivex, CR-39 and mineral glasses,with high quality results.The two sided drilling system performs speedy drillingwithout cracking of the lens.The diameter of the holes can be easily adjusted to a precisionof 0.2 mm.Design and solidity of bits:Always a very precise and aesthetic finish.Block to maintain the lens:Allows correct inclination of the lens during the drilling.Allows to fit the hole to the required diameter.Easy to use with high quality results on rimless jobs.Small footprintPossible diameter of drilling: 0.8 mm to 2.8 mmDimensions: L140 x H185 x W275 mmWeight: 4.1 kgVoltage: 230V / 50 HzColumn DrillPN 68 00 013Drilling of metals and wood.3 rotation speeds: 6 000 / 4 200 / 2 100 tours / mnCapacity of the drill bit from 0.5 to 6 mmDimensions: L 120 x H 340 x P 230 mmWeight: 3.1 kgVoltage: 230 V / 50 HzPower Consumption: 85 WUltrasonic cleaning machinePN 65 60 016Minimum filling quantity 0.6 litreInbuilt heating: 65°CTank: stainless steelCase: stainless steel protected against dripsDegree of protection: IP32Timer: 1 to 15 mnsAccessories:- Insertion basket 113 x 113 x 45 mmwith stainless steel lidInternal dimensions of the tank:W 190 x D 60 x H 185 mmCapacity: 0.9 litre32

WorkshopFrame heatersVavaPN 68 40 007Frame heater with two extractable frame support armsTemperature: 150°CTwo extractable frame support armsDimensions: L 170 x H 210 x P 140 mmWeight: 2 kgVoltage: 230 V / 50 HzPower consumption: 1200 WMagaPN 68 40 006Frame heater with quiet and homogeneous heating.For assembling lenses in plastic frames.Quiet and homogeneous heating:Hot / Cold air selection knob.Choice of 2 electronically controlled temperature settings:- 100°C for acetate frames.- 200°C for Optyl frames or quick heatSpot heating for nasal bridge or branches.Mounting platform to position frame with both sides in contactwith hot air flow.Dimensions: L 210 x H 230 x W 300 mmWeight: 3.1 kgVoltage: 220 V / 50 HzPower consumption: 750 / 1500 WStress viewerPN 67 40 006- Stress viewer with two polaroid filters- Stress analysis using two polarising plates- Lenses fitted in frame for tension measurement- Heat tempering on glass lensDimensions: W 134 x D 154 x H 165 mmWeight: 0.7 kgVoltage: 220 V / 50 Hz33

WorkshopOpticus Rivex 50PN 68 00 003Multifunction riveting press, ideal for reparing frames.Supplied with accessories for:- Riveting, drilling, marking- Expelling screws, perforating, bendingIdeal for fixing framesDimensions: W 140 x D 180 x H 260 mmWeight: 2.5 kgAG5 autogrooverPN 68 00 009Automatic lens groover for glass, plasticand polycarbonate lensesLens diameter: 24 mm to 72 mmChoice of three groove positions:- Parallel to convex face.- Parallel to concave face or median.Lens thickness: 1.5 to 11 mmGroove depth adjustable up to 0.7 mmDimensions: W 170 x D 210 x H 150 mmWeight: 3 kgVoltage: 220-240 V / 50 HzPower consumption: 80 WKey pointEasy access to wheel, which allows notches to be made.Paddy block for Weco blocks«Star Blocks»PN 69 00 001Tool for removing magnetic blocksPN 14 07 03134

Accessories36 Accessories

AccessoriesEdger 310 - 330 C - 350 CSPARE PARTSREF 11 90 375 - Ø 25 mm REF 11 90 406 - Ø 19 mm REF 11 90 522 - Ø 17 mmWeco block holder large Weco block holder medium Weco block holder smallREF SVS114005 - Ø 25 mm REF SVS114004 - Ø 19 mm REF SVS114006 - Ø 17 mm REF 24 06 488Lens clamping adaptorarticulated - largeLens clamping adaptorarticulated - mediumLens clamping adaptorarticulated - half eye8 mm wrenchREF 24 06 48910 mm wrenchREF 37 30 003Key maincoverREF SVS225046Pattern and lens to lens holderonly for Edge 310ADJUSTMENT TOOLSREF 14 04 192 REF 14 04 185 REF 14 04 255 REF 14 04 191Lens/lens offsetcalculation patternScan alignmentadjustment patternScanform gainadjustment toolPattern axisadjustmentREF 24 06 487 REF 14 04 283Triangular scraperonly for Edge 350 CompactLens feeler tips removal / installation toolonly for Edge 31036

AccessoriesEdger 310 - 330 C - 350 CCONSUMABLESREF 11 38 162 - Ø 25 mm REF 11 38 161 - Ø 19 mm REF 11 38 171 - Ø 17 mm / plat REF 21 62 153Flexible lens clampadaptor (large)Flexible lens clampadaptor (medium)Flexible lens clampadaptor (half eye)Seal with filter20 x 27REF 2001-1190-00 - Ø 25 mm REF 2001-1191-00 - Ø 18 mm REF 2001-3228-00 - Ø 17 mmWhite Varioblock Premium Large Single unit White Varioblock Premium Medium Single unit White Varioblock Premium Half-Eye Single unitREF 11 38 181 REF 24 07 020 REF 24 07 021 REF SVS220150Lens feeler tipsonly for Edge 310Cleaning diskroughingCleaning diskfinishingLens holder ring for blockerREF 22 29 043 REF 22 29 055 REF 22 29 002 REF 22 29 056Fuse 3.15 AT250 V - 5x20Fuse 8 AT250 V - 5x20Fuse 5AT250 V - 5x20Fuse 25AT250 V - 5x20REF 22 29 052 REF 22 29 038 REF 12 01 157 REF 11 38 196Fuse 10AT250 V - 6,3x32Fuse 2AT250 V - 5x20Carriage bulb6x4x30 - 24 V - 3 WLens feeler tips - V2only for Edge 330 Compact /350 CompactREF SVS180105Right hand drill bit set / only for Edge 350 Compact37

Accessoriese.3SPARE PARTSREF 11 90 375 - Ø 25 mm REF 11 90 406 - Ø 19 mm REF 11 90 522 - Ø 17 mmBlock holder large Block holder medium Block holder smallCONSUMABLESREF 21 53 012 - ø 25 mm REF 21 53 013 - ø 19 mm REF 11 53 034 - ø 17 mm REF 11 38 162 - ø 25 mmPlastic block large Plastic block medium Plastic block small Flexible lens clamp adaptor largeREF 11 38 161 - ø 19 mm REF 11 38 171 - ø 17 mm REF 11 38 201 REF 14 06 504Flexible lens clamp adaptormediumFlexible lens clamp adaptorhalf eyeLens feeler padDrilling bitREF 11 97 050 REF 21 62 153VisorSeal with filter 20x27REF SVS114004 - ø 19 mm REF SVS114005 - ø 25 mm REF SVS114006 - ø 17 mmLens clamping adaptorarticulated - mediumLens clamping adaptorarticulated - largeLens clamping adaptorarticulated - half eye38

AccessoriesEdger 550 - 580SPARE PARTSREF SVS114005 - Ø 25 mm REF SVS114004 - Ø 19 mm REF SVS114006 - Ø 17 mm REF SVS180125Lens clamping adaptorarticulated - largeLens clamping adaptorarticulated - mediumLens clamping adaptorarticulated - half eyeKit of bar code reader(bar code reader + sample ofcode bar labels + holder)ADJUSTMENT TOOLSREF 14 04 303 REF 14 07 031Calibration toolTool for removing magnetic blocksconsumablesREF 11 38 162 - Ø 25 mm REF 11 38 161 - Ø 19 mm REF 11 38 171 - Ø 17 mm/plat REF SVS180097Flexible lens clampadaptor (large)Flexible lens clampadaptor (medium)Flexible lens clampadaptor (half eye)Removable lens feeler padsSet of 4 piecesREF SVS180138 REF SVS180158 REF 2001-1160-00 - Ø 25 m REF 2001-1161-00 - Ø 19 mmLeft hand drill bitset 1 mmLeft hand drill bitset 0.8 mmWeco magnetic blocks largeSet of 25 piecesWeco magnetic blocks mediumSet of 10 piecesNew ! New !REF 2001-1162-00 - Ø 17 mm REF 60 21 007 - Ø 18 mm REF 60 21 005 - Ø 26 mm REF 11235 - Ø 16 mmWeco magnetic blocks half eyeSet of 10 piecesDouble side adhesive pads-medium1000 piecesDouble side adhesive pads-large1000 piecesDouble side adhesive pads-half eye1000 piecesREF 24 07 020 REF 24 07 021 REF REF 11 97 047Cleaning disk - roughing Cleaning disk - finishing Removable visor39

AccessoriesEdge 680SPARE PARTSREF 11 90 375 - Ø 25 mm REF 11 90 406 - Ø 19 mm REF 11 90 522 - Ø 17 mm REF S171161Block holder large Block holder medium Block holder small Pedal clampingconsumablesREF 11 53 031 - Ø 25 m REF 11 53 037 - Ø 17 mm REF 11 53 036 - Ø 19 mmWeco magnetic block large single unit Weco magnetic block half-eye Weco magnetic block small single unitNew ! New !REF 60 21 007 - Ø 18 mm REF 60 21 005 - Ø 26 mm REF 1406504 - Ø 26 mmDouble side adhesive pads-medium1000 piecesDouble side adhesive pads-large1000 piecesDrill bitdiam. 1 mmREF 11 38 162 - Ø 25 mm REF 11 38 161 - Ø 19 mm REF 1190522 - Ø 17 mm REF 1138190Flexible lens clamp adaptorlargeFlexible lens clamp adaptormediumFlexible lens clamp adaptorhalf eyeLens feeler pad40

AccessoriesEdger 650 - 950 - 955SPARE PARTSREF 2001-1056-00 - Ø 25 mm REF 2001-1066-00 - Ø 20 mm REF 2001-1105-00 - Ø 17 mm REF 2001-3214-00 - Ø 25 mmClamping adaptator - large Clamping adaptator - medium Clamping adaptator - half eye Block adaptator - largeREF 2001-3237-00 - Ø 20 mmBlock adaptator - mediumREF 2001-3317-00 - Ø 17 mmBlock adaptator - half eyeconsumablesREF 2001-3204-00 - Ø 25 mm REF 2001-3205-00 - Ø 18 mm REF 2001-3315-00 - Ø 17 mm REF 1138-5068-00Clamping pad - large Clamping pad - medium Clamping pad - half eye Half eye magnetic varioblocksREF 2001-1190-00 - Ø 25 mm REF 2001-1191-00 - Ø 18 mm REF 2001-3228-00 - Ø 17 mmWhite Varioblock Premium Large Single unit White Varioblock Premium Medium Single unit White Varioblock Premium Half-Eye Single unitREF 1918-3003-00 Trivex/PC toothed grooving wheel REF 1919-3002-00 CR39/Hi slotted grooving wheel REF 1900-1809-00REF 1918-3004-00 Rear safety-bevel knurled wheel REF 1919 3004-00 Trivex/PC knurled grooving wheel Drill bit 0,8 mm / Set of 3 piecesREF 5997-3003-00 REF 5997-3002-00 REF 5997-3018-00 REF 5997-3019-00Cleaning and dressing diamondstick for polishingadjustment toolsCleaning and dressing diamondstick for roughingCleaning and dressing diamondstick for polishingREF 5997-3007-00Cleaning and dressing diamondstick for finishingCleaning and dressing diamondstick for polishingREF 5910-3009-00 REF 2021-3019-00 REF 1137-1062-00 REF 3199-0182-00Flat plier Extraction plier for drill bit Extraction tool for drill bit Cleaning spray41

AccessoriesRoughing-WheelsPart Number Roughing wheel Width ØW2-DW3-DEdge300Edge400Edge500Edge600Edge800Edge9001900-3161-00 Alu Kern Pla 25 110 • •1900-4616-00 Galvano Pla PC 18 110 • • • •1900-4620-00 Universal Gla Pla 18 110 • • • •1900-4621-00 Universal Gla Pla 11 110 • •1900-4642-00 Universal Gla Pla 15 110 • •1900-5042-00 Universal Gla Pla 15 110 •1913-4616-00 Pyramid Pla PC TRI 18 110 • •1547120 Plastic Pla PC TRI 18 90 •1547117 Universal Gla Pla 18 90 •1547109 Universal Gla Pla 16 110 •1547110 Plastic Pla PC 20 110 •1547118 Plastic Pla PC TRI 20 110 •Finishing - WheelsPart Number Finishing Wheel Width ØW2-DW3-DEdge300Edge400Edge500Edge600Edge800Edge9001900-4633-00 Flach- / V-Facette 20 110 • •1900-4634-00 Flach- / V-Facette 18 110 • •1900-4644-00 Universal Gla Pla 24 110 • •1900-5072-00 Flach- / V-HighCurve 18 110 •1900-5242-00 Flach- / V-Facette 15 110 •1900-5606-00 Flach- / V-Facette 25 110 • • •1913-5617-00 Flach- / V-Facette 22 110 •1577410 Flach- / V-HighSpeed 20 90 • (580)1577411 Flach- / V-Facette 18 90 •1577418 HighCurve 90 • (580)1577405 Flach- / V-Facette 18 110 •Polishing-WheelsPart Number Polishing Wheel Width ØW2-DW3-DEdge300Edge400Edge500Edge600Edge800Edge9001911-3008-00 Flachfacette 15 110 • •1911-3010-00 Flachfacette 10 110 • •1911-3020-00 Flachfacette (scharf) 10 110 • • • •1911-4018-00 Flach- / V-Facette 18 110 • •1577415 Flach- / V-Facette 18 90 •1577420 Flach- / V-HighSpeed 18 90 • (580)1577413 Flach- / V-Facette 18 110 •1577414 Flachfacette 12 110 •42

Accessories430 / 450 / 450 drill / 455 drillSPARE PARTSREF 2001-3214-00 - Ø 25 mm REF 2001-3237-00 - Ø 19 mm REF 2001-3229-00 - Ø 17 mm REF 2001-1056-00 - Ø 25 mmBlock adaptator - large Block adaptator - small Block adaptator Clamping adaptator - largeREF 2001-1066-00 - Ø 18 mmClamping adaptator - smallREF 2001-3062-00 - Ø 17 mmClamping adaptatorREF 1090-3713-00 REF 1090-5960-00 REF 3141-0324-00 REF 3141-0323-00Evacuation spare part Protection with cable clamp Watering tool (new) Straight watering toolREF 3141-0340-00 REF 3571-1225-00 REF 3652-2502-00 REF 3652-2503-00Angled watering tool Power supply cable 2,5 m Connection cable 5 m Connection cable 10 mREF 1114-1773-00Tracing interface cable 3 m43

Accessories430 / 450 / 450 drill / 455 drillconsumablesREF 2001-1190-00 - Ø 25 mm REF 2001-1191-00 - Ø 18 mm REF 2001-3228-00 - Ø 17 mm REF 2001-3204-00 - Ø 25 mmWhite Varioblock Premium LargeSingle unitWhite Varioblock Premium MediumSingle unitWhite Varioblock Premium Half-EyeSingle unitClamping pad-largeREF 2001-3205-00 - Ø 18 mm REF 2001-3315-00 - Ø 17 mm REF 3561-0233-00 REF 5998-3027-00 REF 1075-1131-00Clamping pad medium Clamping pad half eye Bulb for edging roomAnti-foam oilfor filtering tanksProtection bags for tankSet of 3 piecesREF 5999-1015-00 REF 3102-0458-00 REF 3566-0253-00 REF 3566-0244-00Plastic bags for tanksSet of 25 piecesToric clamping beltFuse 15A protectionfor the main engine 430/450Fuse 4A protectionfor watering systemfiltering tanksFor closer circuit use.Compatible with all Weco edgers- 3 filtering steps- Easy cleaning and emptyingREF 1075-0055-00 REF 1075-1149-00 REF 5999-1015-00 REF 1075-1148-00Filtering tank Filters (10 pieces) Protection bags (25 pieces) FlexiblewheelsREF 1900-4620-00 REF 1900-5606-00Universal roughing wheel18 mmFinishing wheel 25 mmEdge 430 onlyREF 1911-3010-00 REF 1123-1374-00 REF 1900-5617-00 REF 1911-3008-00Polishing wheel 10 mmPolishing kit rimlessand bevelFinishing wheel 22 mm(450/455 drill)Polishing wheel 15 mmEdge 430 only44

Accessories450 drill / 455 drillSPARE PARTSREF 2021-1002-00 REF 2021-1004-00 REF 1094-5908-00Tools for extraction of drill bit Key to change the turbine Set turbine + sealconsumablesREF 1900-1808-00 REF 3102-0478-00 REF 3102-0443-00 REF 3146-0408-00Drill bit 0.8 mmSet of 6 piecesHard turbine seal (before) Flexible turbine seal Oil for compressorREF 1900-1810-00 REF 5998-3035-00 REF 1123-3075-00Turbo grooving bit 0,6 mm Turbine oil Auto adhesiv cover sealTrace 2 / Trace 2 HCSPARE PARTSREF 1114-3349-00 REF 1114-1063-00 REF 3010-5110-00 REF 1114-1773-00Stylusfor Trace 2 HCStylusfor Trace 2Screw for stylusCable RS2329/25 3mconsumablesREF 2001-3088-00 REF 2001-3087-00 REF 3566-0202-00 REF 3566-0247-00Adhesive block 4 holesAdhesive block 2 holesFuse 2,5 ATPrincipal card protectionFuse 0,4 AT45

AccessoriesTrace 3SPARE PARTSREF SVS180104REF SVS2220342 mm single stylus head Centring padADJUSTMENT TOOLSREF 14 04 192 REF 14 04 185 REF 14 04 191 REF 14 04 255Lens/lens offset calculationpatternScan alignment adjustmentpatternPattern axisadjustmentScanform gainadjustment toolREF SVS225046Pattern and lens to lens holderCAD IISPARE PARTSREF 3102-0437-00 REF 1100-1030-00Toric seal to maintain the blockCentring part forsmall lensesconsumablesREF 3566-0247-00Fuse 0,4 AT46

AccessoriesCAD IIISPARE PARTSREF 3102-0437-00 REF 1100-1030-00Toric seal to maintain the blockCentring part forsmall lensesconsumablesREF 3566-0247-00Fuse 0,4 ATCAD 4SPARE PARTSREF S390018 REF S390019 REF 11 15 264Lens holder large Lens holder small Hand restconsumablesREF 24 06 211 REF 24 06 502 REF 24 06 503Black permanent penStylus for touch screenSpecial pencilfor hydrophobic lensesREF 2001-1160-00 - Ø 25 m REF 2001-1161-00 - Ø 19 mm REF 2001-1162-00 - Ø 17 mmWeco magnetic blocks largeSet of 25 piecesWeco magnetic blocks mediumSet of 10 piecesWeco magnetic blocks half eyeSet of 10 pieces47

AccessoriesCAD 4SPARE PARTSREF 21 35 414 REF 22 29 038 REF 21 62 200 REF 10 00 186Bar codes tags (100 ) Fuse 2AT-250V-5x20 Toric seal Antistatic cleaning wipesNew ! New !REF 60 21 007 - Ø 18 mm REF 60 21 005 - Ø 26 mm REF 11235 - Ø 16 mmDouble side adhesive pads-medium1000 piecesDouble side adhesive pads-large1000 piecesDouble side adhesive pads-half eye1000 piecesCAD 5SPARE PARTSREF SVS225041 REF SVS225042 REF SVS1801125Lens holderUncut patterns holderKit of bar code reader (bar code reader+ sample of code bar labels + holder)adjustment toolsREF 14 04 228 REF 14 04 227 REF SV1404224 REF 14 07 031Calibration lens - 3 dioptries Calibration lens + 3 dioptries Calibration lensTool for removingmagnetic blocks48

AccessoriesCAD 5consumablesREF 2001-1160-00 - Ø 25 m REF 2001-1161-00 - Ø 19 mm REF 2001-1162-00 - Ø 17 mmWeco magnetic blocks largeSet of 25 piecesWeco magnetic blocks mediumSet of 10 piecesWeco magnetic blocks half eyeSet of 10 piecesREF SVS300017 REF SVS300037 REF 22 01 058 REF 24 06 211Opaque screen(for centring device before 2009)Opaque screen Dulux lamp Black permanent penREF 24 06 503 REF SV1177019 REF 22 29 041 REF 22 29 038Special pencilfor hydrophobic lensesBlocking unit filterSet of 3Fuse 1AT - 250V - 5x20Fuse 2AT - 250V - 5x20New ! New !REF 60 21 007 - Ø 18 mm REF 60 21 005 - Ø 26 mm REF 11235 - Ø 16 mmDouble side adhesive pads-medium1000 piecesDouble side adhesive pads-large1000 piecesDouble side adhesive pads-half eye1000 piecesVerifier T2spare partsconsumablesREF 2001-3289-00 REF 3102-0480-00 REF 3503-0204-00Centring part for small lenses Toric seal to maintain the block Fan filter (single unit)49

AccessoriesVerifier T2adjustment toolsREF 1130-1036-00 REF 1130-3080-00Set of control toolsPlatinum lens, lens holderSmooth I & IISPAre partsREF 1116-3031-00 REF 1116-3099-00Evacuation tool for Smooth 2590 Egder barconsumablesREF 1017-3016-00 REF 1017-3018-00 REF 1116-3096-00 REF 1116-3085-00Little sponge for Smooth Large sponge for Smooth Large sponge for Smooth 2 Small sponge for Smooth 2wheelsREF 1900-3161-00Roughing wheelwithout bevel Smooth 2REF 1905-3250-00 REF 1905-4150-00 REF 1905-4160-00 REF 1912-4150-00Finishing wheelwith bevel 25 mm Smooth 1Finishing wheel with bevel 25 mmSmooth 2Special fine finishing wheelwith bevel 25 mm Smooth 2Polishing wheelwith bevel 25 mm Smooth 250

AccessoriesDrilling DM3consumablesREF S807033 REF S807032 REF S807079Reamer HM20 Drill bit HM19 BeltAuto grooverspare partsREF S807039 REF 68 00 020Protection housing for diamond wheelProtection housing for diamond wheelconsumablesREF S807071 REF S807051 REF 68 00 019 REF S807031Wheel driving belt Notched belt Grooving wheel 1,2 mm Diamond wheel51

Professional solutionsLuneau Technology Operations2 rue Roger Bonnet_27340 PONT DE L’ARCHE_FRANCETel. + 33 232 989 132_Fax + 33 235 020 294www.weco-instruments.comSee accessories pages 34_35A company of Luneau Technology52This document is not contractual - conception www.c-comme-c.fr 02 35 73 15 15 - ©photos : E.Bienvenu, C comme C, Briot - FC.00675 - ind.03 - Juin 2012