צמנט רגיל צמנט : מסמך זה הוא הצעה בלבד מכון התקנים הישראלי

ועדה 10601EN 197-1:2011 (E)CE conformity marking, consisting of the“CE”-symbol given in Directive 93/68/EEC.0123Identification number of the certification bodyAnyCo Ltd, PO Box 21, B-1050The registered addressAny Factory100123-CPD-0234EN 197-1:2011CEM I 42,5 R - SR 3Name or identifying mark of the manufacturerRegistered address of the manufacturerName or identifying mark of the factory wherethe cement was produced 1)Last two digits of the year in which themarking was affixed 2)Certificate numberNo. of European Standard with the date ofversionExample of standard designation, indicatingthe cement product and the strength class,(and, where applicable, the notation for lowheat of hydration and/or sulfate resistance) asspecified in Clause 8 of EN 197-1:2011Limit for chloride, in % 3)Upper limit for loss on ignition of fly ash, in% 4)Additional informationStandard notation of admixture 5)Limit for sulfate, in % 6)Limit for organic additives exceeding 0,2 % 7)Figure ZA.1 — Example CE marking information____________________1) Considered necessary for the requirements of EN 197-2 but not compulsory.2) The year of marking should relate to either the time of packing into bags or the time of dispatch from the factory or depot.The two digits of affixing could be the last two digits of the production year of the CE marked product.3) Only where the common cement or sulfate resisting common cement is produced to meet a different chloride content limit tothe value specified in Table 4 of EN 197-1:2011.4) Only where, in accordance with 5.2.4.1 of EN 197-1:2011, a fly ash is used as main constituent.5) Only where, in accordance with 5.5 of EN 197-1:2011, an admixture conforming to the EN 934 series is used.6) Only where CEM I-SR 5 is produced with a different limit of the sulfate content compared to the specifications given in Table5 of EN 197-1:2011.7) Only where, in accordance with 5.5 of EN 197-1:2011, the quantity of organic additives on a dry basis exceeds 0,2 % bymass of the final cement.For reasons of practicability, selections from the following alternative arrangements for bagged cement concerningthe presentation of the accompanying information may be used.36