צמנט רגיל צמנט : מסמך זה הוא הצעה בלבד מכון התקנים הישראלי

ועדה 10601EN 197-1:2011 (E)Clause 9 of EN 197-2:2000, giving rules relating to Dispatching Centres, is not part of the procedure of attestationof conformity for the affixing of the CE marking under the CPD.Table ZA.3 — Assignment of evaluation of conformity tasks for cement under system 1+TasksContent of the tasksEvaluation ofconformityclauses to applyTasks undertheresponsibilityof themanufacturerFactory production control(FPC)Further testing of samplestaken at factoryParameters related to all characteristics ofTable ZA.1 a relevant for the intended useAll characteristics of Table ZA.1 a relevantfor the intended useClause 9 of thisstandard andEN 197-2:2000,Clause 4Clause 9 of thisstandard andEN 197-2:2000,Clause 4Initial type testingThose characteristics of Table ZA.1 arelevant for the intended useClause 9 of thisstandard andEN 197-2:2000,Clauses 5 and 7Tasks undertheresponsibilityof the productcertificationbodyInitial inspection of factoryand of FPCContinuous surveillance,assessment and approvalof FPCParameters related to all characteristics ofTable ZA.1 a , relevant for the intended useParameters related to all characteristics ofTable ZA.1 a , relevant for the intended useClause 9 of thisstandard andEN 197-2:2000,Clauses 5 and 7Clause 9 of thisstandard andEN 197-2:2000,Clauses 5 and 7Audit testing of samplestaken at factoryThose characteristics of Table ZA.1 arelevant for the intended useClause 9 of thisstandard andEN 197-2:2000,Clauses 5 and 7aExcept durability.ZA.2.2 EC certificate of conformityWhen compliance with the conditions of this annex is achieved, the certification body shall draw up a certificate ofconformity (EC Certificate of conformity), which entitles the manufacturer to affix the CE marking. The certificateshall include:⎯ name, address and identification number of the certification body,⎯ name and address of the manufacturer, or his authorised representative established in the EEA, and place ofproduction,NOTE The manufacturer may also be the person responsible for placing the product onto the EEA market if he takesresponsibility for CE marking.⎯ description of the product (type, identification, use,...),⎯ provisions to which the product conforms (i.e. Annex ZA of this EN),34