MANGANESE ORE SINTERING MISCONCEPTS AND FACTS - IIM

More documents

Recommendations

Info

CONCLUSIONSCharacteristics comparison between fines and sinters of Mn Ore forFeMn / SiMn productionSN DETAILS Mn <strong>ORE</strong> FINES Mn <strong>ORE</strong> SINTERS10Financial Gains/LossesDue to heavy moisture andcrust formation, electricalpower is very high leading toproduction and productivityloss. On an average fines tendto increase specific powerconsumption by 200 to 400Unit/T of alloy.i) All the fines are used including finesgenerated during sintering.ii) Coke fines are gainfully utilized.iii)Entire moisture is driven off insintering and product is totally dry.iv) Fines are available at reducedprices. Even with cost of sintering it iscomparable to lumps.v) Expected saving in power upto 200KWH/T of product. (75-80% sinters infeed)Productivity increases between 4 to7%.16
GESPL SOLUTION FOR INDEGINEOUS SINTER PLANTSExclusive Licensee Agreement with MINITEC - BrasilUnique carousal design for sinter plants – cost effectiveWorld class technology from Brasil, manufacturing in IndiaSintering for iron, manganese, tin oresCopyright 2007. Ghalsasi Engineering Systems Pvt.Ltd. All Rights Reserved.
Page 1 and 2: MANGANESE ORE SINTERINGMISCONCEPTS
Page 3 and 4: COMPANY INTRODUCTION• Established
Page 5 and 6: FIRST MISCONCEPTNo need for sinteri
Page 7 and 8: SECOND MISCONCEPTDuring sintering,
Page 9 and 10: FOURTH MISCONCEPTSinters can not be
Page 11 and 12: RECOMMENDATIONS• Please get to kn
Page 13 and 14: CONCLUSIONSCharacteristics comparis
Page 15: CONCLUSIONSCharacteristics comparis
Page 19 and 20: ADVANTAGES OF MINITEC-GESPL SINTER
Page 21: GESPL - A Total Solution for Benefi

MANGANESE ORE SINTERING MISCONCEPTS AND FACTS - IIM

Create successful ePaper yourself

Delete template?

Save as template?