MiniCom 3 User manual - Armatec

50MiniCom 3By secondary addressesThe scan will be done according to the meters' secondary addresses. Use this method when you havemore than one meter connected to one MBus line or when you do not known the primary addresses ofthe connected meters or they are the same (the default setting from the manufacturer is 0).Support of secondary addressing:Not all meter types support secondary addressing! The meter Calmex cannotbe read using the secondary address. Please check under the topic Metertypes to see whether the meter type you intend to read supports secondaryaddressing.By primary addressesThe scan will be done according to the meters' primary addresses. Use this method if you have just afew meters connected or when you're sure that there is no primary address collision among theconnected meters.Address rangeSelect the range of primary addresses. If you are sure of the primary addresses of the connectedmeters, you can restrict the range for the scanning. Otherwise you should keep it set at 0-250.© 2006 Sensus Metering System