MiniCom 3 User manual - Armatec

More documents

Recommendations

Info

44MiniCom 3Meter parameters:Before selecting a command you must first check communicationparameters of the meter. The meter you select must have its MBus addressand baudrate set correctly. The parameters can be changed by doubleclicking on the meter in the Meters window, or by clicking the button on theright on your mouse and selecting the command "Meter Parameters", or bychoosing from the main commands menu "Tools" / "Meter Parameters".4.2.2 CommandsAfter opening the program, this window may be blank. The commands will become available after youselect a meter.There is a list of commands for a single meter type. The Commands window is different for every typeof meter.To use all the commands which MiniCom 3 provides, you need to be registered. In the unregisteredversion some commands are unavailable and cannot be selected.Details for using commands can be found under the topics Commands and Meter types.© 2006 Sensus Metering System
User Interface 45Command description:Quick help for every command can be viewed with the icon . For somecommands, the current parameter value and the reading time are also shownwhen you click on the above list for a description.4.2.3 ResultsAfter opening the program, this window may be blank. The results will appear after the first readout. Allread counters and identification data from the telegram head on the meter are listed.Identification data is shown first, with name and value.The counters each have a number, name, value, unit, value type, tariff, storage number and devicenumber.4.2.4 OutputThis is available only in the registered version. It shows the status and details of communication withthe meter.The above window shows:A description of running communication, e.g. "Reading RAM (4 bytes at address 0242)..."A list of all sent and received bytes in hexadecimal format, e.g. "Sending bites: >> 10|5B|06|61|16"Readout results in the order of the list of counters.© 2006 Sensus Metering System
Page 1: MiniCom 3User manual© 2006 Sensus
Page 4 and 5: IIMiniCom 32 Main Window ..........
Page 6 and 7: 2MiniCom 31 IntroductionDescription
Page 8 and 9: 4MiniCom 3computer equipped with at
Page 11 and 12: PartII
Page 13 and 14: Meter Types 9The following table co
Page 15 and 16: Meter Types 112.1 PolluThermEnergy
Page 17 and 18: Meter Types 132.3 PolluCom ECompact
Page 19 and 20: Meter Types 152.5 PolluMUK EMultije
Page 21 and 22: Meter Types 172.7 DYNAMIC EncoderRe
Page 23 and 24: Meter Types 192.8 AccupulsComplemen
Page 25: Meter Types 212.10 CalmexEnergy met
Page 28 and 29: 24MiniCom 33 CommandsThe following
Page 30 and 31: 26MiniCom 33.2 Set Primary MBus Add
Page 32 and 33: 28MiniCom 3Secondary MBus address:T
Page 34 and 35: 30MiniCom 3System date and time:For
Page 36 and 37: 32MiniCom 3Clicking on "OK" sends t
Page 38 and 39: 34MiniCom 3Clicking on "OK" sends t
Page 40 and 41: 36MiniCom 33.13 Device Configuratio
Page 42 and 43: 38MiniCom 3Customer Location:The cu
Page 45 and 46: PartIV
Page 47: User Interface 434.2.1 MetersThe Me
Page 51 and 52: User Interface 47Clear output windo
Page 53 and 54: User Interface 49Support of seconda
Page 55 and 56: User Interface 51Primary addressing
Page 57 and 58: User Interface 53In the version for
Page 59: User Interface 55CustomizeThe butto
Page 62 and 63: 58MiniCom 35 How to Do5.1 Solving P
Page 65 and 66: Index 61Index- A -About 54Accupuls
Page 67: Index 63Timeout 49Timeout scale 49T

MiniCom 3 User manual - Armatec

Create successful ePaper yourself

Delete template?

Save as template?