MiniCom 3 User manual - Armatec

Meter Types 172.7 DYNAMIC EncoderRegister for cold water meters "Encoder" MBus and MiniBus.Text on DYNAMIC Encoder MBus cable (grey)M-Bus: no polarityProtocol: EN 1434 / IEC 870Attention - DYNAMIC Encoder MBusBe careful what type of Encoder you use.The DYNAMIC Encoder MBus will not communicate when connected toMiniBus (inductive interface).Text on DYNAMIC Encoder MiniBus cable (black)Do not connect to an M-Bus !red: Signal black: GroundProtocol: EN 1434, IEC 870Attention - DYNAMIC Encoder MBusBe careful what type of Encoder you use.The DYNAMIC Encoder MiniBus cannot be connected to MBus terminals.Such a connection would destroy the register.FeaturesProtocol : MBus (DYNAMIC Encoder MBus), MiniBus (DYNAMIC Encoder MiniBus)Supported baudrates: 300Supported addressing: primary, secondary (only for "Start Readout")Supported communication interfaces: MBus terminals (DYNAMIC Encoder MBus), inductive interface(can be connected through inductive head to MBus terminals)Number of counters in meter readout: 2List of supported commands· Start Readout© 2006 Sensus Metering System