Laundry Point - Comesterogroup

Operating manual Laundry PointWhen the initialisation card is inserted in the (non-initialised) cash-point, the codescontained in the card are copied in the cash-point.The cash-point is automatically restarted and from that point onwards, it will operatewith the assigned codes.Once a cash-point is initialised, the codes can no longer be changed.Should you require two or more cash-points to operate with the samecard, they must be initialised with the same initialisation card.This procedure is always necessary after every machine update. (SeeSD Card paragraph).Provider cardOnce this card is inserted in the (previously initialised) cash-point, you can access theconfiguration and accounting programme.The purpose of this card is to allow access to economic information stored in thecash-point. In particular, the owner/s of this card can:• modify the machine and product prices.• view accounting.• delete accounting/events• create new provider, technical or sub-provider cards.The provider card does not allow adding or removing machines fromthe configuration.Also, it does not allow changing the BIO board inputs and outputsmanagement.A copy of this type of card is provided with the cash-point.Prepaid cardThis is the card intended to be inserted in the card dispenser to be sold to the endcustomer.This means that the customer can purchase this type of card (using cash only) anduse the credit contained in it to pay for services and products.The customer can recharge the card with cash either insertingmoney first and then the card or vice-versa.In case of failure to dispense a product paid with the card, the sumof the product is returned in cash.Before inserting the card in the dispenser, proceed as follows:40