program self-study report - Lamar University Electrical Engineering

ELEN 3322 Electronics II(Required)Catalog Description: In depth study of semiconductor devices and integrated circuit characteristics,stability, feedback amplifiers and frequency response.Prerequisites:By course: ELEN 3321 Electronics I and ELEN 3312 Circuits II with grade of C or better.By topic: KCL, KVL, basic circuit analysis including DC, AC, and transient analysis. Basic physicsand operation of diodes, BJTs and FETs. DC and small-signal analyses of these devices and SPICEmodeling. Analysis and design of basic amplifier configurations. The ideal op-amp circuits.Courses that require this as a prerequisite: ELEN 4206, ELEN 4207Credits: 3Offered: Spring AnnuallyInstructors:Primary: Selahattin SayilSecondary: Wendell BeanTextbook: Electronic Circuit Analysis & Design, Donald A. Neaman, McGraw Hill Publishers, SecondEdition, 2001, ISBN 0-07-245194-7.References: Schematic Capture with Electronics Workbench Multisim, Marc E. Herniter, Prentice Hall,2004, ISBN 0-13-049614-6.Microelectronic Circuit, Adel S. Sedra and Kenneth C. Smith, Oxford University Press, Fifth Edition,2004, ISBN 0-19-514251-9.Objectives (with corresponding ABET Criteria/outcomes):Ensure students:• Are familiar with current and future applications of electronics with an emphasis onmicroelectronics. (Criterion 3(h),(i))• Are able to design and analyze operational amplifier circuits. (Criterion 3(a),(c))• Understand the non-ideal effects in operational amplifier circuits. (Criterion 3(a))• Understand the frequency response of transistors and the effect of circuit capacitors on thefrequency response. (Criterion 3(a))• Are able to construct the bode plots of amplifier circuits. (Criterion 3(a),(k))• Understand characteristics of power transistors and power amplifiers. (Criterion 3(a))• Understand integrated circuit biasing and current source configurations. (Criteria 3(a),(c))• Are able to analyze differential and multistage amplifiers. (Criterion 3(a))• Are able to analyze and understand the stability of feedback circuits. (Criterion 3(a))• Are able to design integrated circuits for a target application. (Criterion 3(a),(c))• Are able to use the circuit simulator SPICE for analysis of electronic circuits. (Criterion3(a),(b),(k))EE Program Self-Study Report-2006 69