TILT-UP CONSTRUCTION - Brock White

Gyro Tilt PlusSystemT-49-E Gyro Tilt Plus Edge Lift InsertThe Dayton Superior T-49-E Gyro Tilt Plus Edge LiftInsert is the same basic insert as the face lift insert, butis furnished without the wire base. This allows the plasticvoid to be nailed directly to the panel form. StandardT-49-E insert is 3/4” x 9-1/2”, other lengths are availableon request.T-49-E Gyro Tilt PlusEdge Lift InsertTypical Edge Lift ApplicationMinimum Corner Distance 24”Shear BarLifting SystemsCoil InsertsInsert SpacingInsert SpacingShown with mandatory shear bar in placeInsert Spacing3/4”Wall ThicknessActual Edge DistanceMinimum Corner Distance 24”T-51 Shear BarPanel FormInsert LengthSetting PlugT-49-E InsertSd eTd eTo Order:Specify: (1) quantity, (2) name, (3) insert length.Example:100, T-49-E Gyro Tilt Plus Edge Lift Insert,9-1/2” long.Bar SupportCasting BedSd e = Minimum edge distance in the direction ofapplied shear load.Td e = Minimum edge distance for tension loading.SpacingBetweenAnchors20"30"40"50"60"T-49-E Gyro Tilt Plus Edge Lift Insert - Safe Working Loads (lbs.)Panel Thk.Sd e4-1/2"2-1/4"5"2-1/2"6"3"7"3-1/2"8"4"Shear*4,0004,5004,9205,3406,400Tension4,0005,0006,0006,8008,000Shear*4,0004,5004,9205,3406,400Tension 5,2006,6008,1009,20010,600Shear* 4,000 4,5004,9205,3406,400Tension 6,200 7,800 9,700 11,10012,500Shear*4,0004,5004,9205,3406,400Tension7,0508,80010,80012,70014,000Shear*4,0004,5004,9205,3406,400Tension 7,8009,30011,30013,40015,150Safe Working Loads reflect approx. 2:1 safety factor in normal weight 2,500 psi concrete.See page 4 for lightweight concrete reduction factors.Note: Edge lift applications require the use of the Gyro Tilt Plus T-51 Shear Bar to develop the shear loads displayed in the chart.*Shear loads are based on mandatory use of shear bar.48 04-09