TILT-UP CONSTRUCTION - Brock White

Ground Release IISystemLifting SystemsCoil InsertsP-52 Swift Lift Anchor - Edge Lift AnchorP-52 Swift LiftAnchorHeadShaftDiameterFootCaution: The Swift Lift anchor is designed to be usedin conjunction with the P-54 plug and P-59 shear barcombination. Failure to use this combination may resultin concrete spalling or premature failure.The Dayton Superior P-52 Swift Lift Anchor is a hot forgedinsert available in 9/16” and 3/4” shaft sizes. The sphericalhead engages with the P-51 hardware, on page 61, to lift andhandle precast panels. The standard lengths available for the9/16” unit are 6-3/4” and 11”. The standard lengths availablefor the 3/4” unit are 9-1/2” and 19”. Other lengths are availableon special order.To Order:Specify: (1) quantity, (2) name,(3) shaft diameter, (4) length.Example:200, P-52 Swift Lift Anchors,9/16” dia. x 11” long.P-54 Swift Lift Recess PlugThe Dayton Superior P-54 Swift Lift Recess Plug isfabricated from high density polyethylene plastic in two sizesto accommodate the P-52 anchor, above. The two-piecedesign snaps together to securely hold the anchor. Built-intabs are provided on the plug to hold the P-59 Swift LiftShear Bar, shown below.3” for 9/16” Diameter Anchors3-3/4” for 3/4” Diameter AnchorsP-54 Swift Lift Recess PlugCaution! The Swift Lift recess plug is designed to be usedin conjunction with the P-52 insert and P-59 shear barcombination. Failure to use this combination may resultin concrete spalling or premature failure.To Order:Specify: (1) quantity, (2) name,(3) shaft diameter.Example:200, P-54 Swift Lift Recess Plugs for9/16” shaft diameter.P-59 Swift Lift Shear BarThe Dayton Superior P-59 Swift Lift Shear Baris designed for use with the P-54 recess plugshown above.For Use WithAnchors HavingWireDiameterOverallWidth9/16" Dia. Shafts .375" 24"3/4" Dia. Shafts .440" 30"Wire DiameterOverall WidthP-59 Swift Lift Shear BarTo Order:Specify: (1) quantity, (2) name,(3) size.Example:200, P-59 Swift Lift Shear Bars 3/4” diameter.40 04-09