TILT-UP CONSTRUCTION - Brock White

MiscellaneousE-Z ChairE-Z Chairs are designed for superior strength and stability. They are well suited fortilt-up, precast and poured in place slab applications. E-Z Chairs are available in 3/4”to 6” cover heights for rebar sizes up to #11. E-Z chairs are sold in full cartons only.An optional Sand Plate is available for use on grade or in Sandwich Panels.To Order:Specify: (1) quantity, (2) name, (3) cover heightExample: 4 boxes (700), 121271, E-Z Chairs, 4” coverPEZ E-Z ChairPSP Sand PlateE-Z LOK Slab BolsterE-Z LOK Slab Bolster provides a strong, stable support and spacer for rebar in slab orwall applications. The E-Z LOK Slab Bolster can be used in individual 32” sections or thesections can be snapped together to satify any job-required length. E-Z LOK Slab Bolster isavailable in 3/4” to 3” cover heights and is sold in full cartons only.To Order:Specify: (1) quantity, (2) name, (3) cover heightExample: 2 boxes (300), 78066, E-Z LOK Slab Bolster, 2” coverAztec Strongback SBU (Slab Bolster Upper)PSBU PATENT PENDINGThe Aztec Strongback SBU supportstop layer in Double Mat application,Rebar or Wire Mesh, Slabs, HeavyDuty On-Grade, Corrugated Decking,Side-Form Spacer-below-grade applications only, PrecastCover Height: From 1" to 3-1/4" (1/4" increments)Features: • Designed for use with Epoxy-Coated/FRP/StainlessSteel/Galvanized rebar• Intended for use in corrosive environments• Spans corrugations in elevated deck applications• Suitable for use on Vapor Barriers or Insulating Foam• No overlap required• Manufactured in 30" lengths in standard boxes• Special packaging available in 5' or 10' sections, bundledand palletized• Strong as metal SBUPSB E-Z LOKSlab BolsterORDER CODE COVER FT. BOX QTY/PER BOX WT.LBS. PERBOX220165 1" 100 40 40220335 1-1/4" 100 40 40220166 1-1/2" 75 30 30220312 1-3/4" 75 30 30220167 2" 75 30 30220313 2-1/4" 75 30 30220297 2-1/2" 50 20 20220314 2-3/4" 50 20 20220296 3" 50 20 20220315 3-1/4" 50 20 20220384 3-1/2" 50 20 20220461 3-3/4" 50 20 20220382 4" 50 20 20220462 4-1/4" 50 20 20220385 4-1/2" 50 20 20220463 4-3/4" 50 20 20220386 5" 50 20 20Miscellaneous andChemical ProductsAztec Straddle Chair - PSCApplication: Single Mat -Rebar or Wire Mesh, BottomLayer Double Mat-Rebar or Wire Mesh, Tilt Wall,Side-Form Spacer, On-Grade: when used with Sand PlateCover Height: From 3" to 7-3/4"Features • Fits rebar #3 to #11• Minimal footprint with staple down feature• With 2 sizes per chair• Straddles lower rebar mat• Same material charachteristics as Aztec tower chairORDER CODE COVERQTY/BOXWT.LBS. PER BOX126299 3" – 3-3/4" 250 27126300 3-1/2" – 3-3/4" 200 26126301 4" – 4-1/4" 200 32126302 4-1/2" – 4-3/4" 200 34126303 5" – 5-1/4" 150 29126304 5-1/2" – 5-3/4" 150 30126305 6" – 6-1/4" 150 32126306 6-1/2" – 6-3/4" 150 34126307 7" – 7-1/4" 125 36126308 7-1/2" – 7-3/4" 125 38Castle ChairCastle Chairs are uniquely designed with a wide base ring to provide stability on poorly compactedor expansive soils. Each Castle Chair offers two cover heights to allow for variation in grading.Castle Chairs are strong enough to carry the weight of ironworkers and concrete finishers, but willnot damage moisture protection membranes. Castle chairs are available in 1-1/2” to 4-1/4” coverheights and are sold in full cartons only.To Order:Specify: (1) quantity, (2) name, (3) cover heightExample: 2 boxes (700), 122837, Castle Chairs, 2-1/2” to 2-3/4” cover108 02-09