Quickstart 750-881 - Wago
Quickstart 750-881 - Wago Quickstart 750-881 - Wago
36 Application example: Starterkit881_App1_FUP.pro WAGO-I/O-SYSTEM 750750-881 ETHERNET Programmable FieldbusA pulsing signal is generated in the "Blink" subprogram. This blink signal"tofBlink2.Q" is required for the flashing frame around the buttons in the display.The pulse period for this signal is 800 ms, which corresponds to a frequency of1.25 Hz.Figure 33: Blink signalThe clock-pulse generator is implemented using two OFF delays connected inseries, "tofBlink1" and "tofBlink2." This is achieved by linking the output "Q" of"tofBlink1" to the negated input "IN" of "tofBlink2." In addition, the output "Q"of "tofBlink2" is also linked back to the input "IN" of "tofBlink1."Figure 34: Network 1 (Blink)The signal status sequence for the two OFF delays "tofBlink1.Q" and"tofBlink2.Q" is illustrated as follows:Figure 35: Output signals for OFF delaysQuickstart ReferenceVersion 1.1.0
WAGO-I/O-SYSTEM 750 Application example: Starterkit881_App1_FUP.pro 37750-881 ETHERNET Programmable Fieldbus4.5 Subprogram "UserLED"Required library "Visual.lib"!You must have the "Visual.lib" library to activate the USR-LED using thefunctions described below.This library is located in the directory:WAGO Software > CoDeSys V2.3 > Targets > WAGO > Libraries > 32_BitThe "UserLED" subprogram is located in the Visualization folder. The"UserLED" subprogram activates the USR-LED fieldbus controller. Changing theUSR-LED colors is carried out using a button in the visualization. This LED canbe displayed in green, red and orange.Figure 36: "UserLED" programFurther information for activation of the USR-LEDActivation of the USR-LED is only explained with an example in this section. Formore detailed information about USR-LED signaling and about using the"Visual.lib", the corresponding library description will be of assistance.The help file for this description is located in the WAGO-I/O-PRO directory:WAGO Software > CoDeSys V2.3 > Targets > WAGO > Help > German > CAA-WAGO_Visual.chm.Quickstart ReferenceVersion 1.1.0
- Page 1 and 2: Pos : 3 /Alle Serien (Allgemeine M
- Page 3 and 4: === Ende der Liste für T extmar ke
- Page 5 and 6: Pos : 9.4.1 /Alle Serien (Allgemein
- Page 7 and 8: Pos : 10 /D okumentation allgemei n
- Page 9 and 10: Pos: 12.7 /Dokumentation allgemein/
- Page 11 and 12: Pos : 12.11.5 /Alle Serien (Allgeme
- Page 13 and 14: Pos : 17 /Serie 750 ( WAGO-I/O-SYST
- Page 15 and 16: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 17 and 18: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 19 and 20: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 21 and 22: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 23 and 24: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 25 and 26: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 27 and 28: WAGO-I/O-SYSTEM 750 Quickstart Desc
- Page 29 and 30: WAGO-I/O-SYSTEM 750 Application exa
- Page 31 and 32: WAGO-I/O-SYSTEM 750 Application exa
- Page 33 and 34: WAGO-I/O-SYSTEM 750 Application exa
- Page 35: WAGO-I/O-SYSTEM 750 Application exa
- Page 39 and 40: WAGO-I/O-SYSTEM 750 Application exa
- Page 41 and 42: WAGO-I/O-SYSTEM 750 Application exa
- Page 43 and 44: WAGO-I/O-SYSTEM 750 Application exa
- Page 45 and 46: WAGO-I/O-SYSTEM 750 Application exa
- Page 47 and 48: WAGO-I/O-SYSTEM 750 Application exa
- Page 49 and 50: WAGO-I/O-SYSTEM 750 List of Figures
- Page 51 and 52: === Ende der Liste für T extmar ke
WAGO-I/O-SYSTEM <strong>750</strong> Application example: Starterkit<strong>881</strong>_App1_FUP.pro 37<strong>750</strong>-<strong>881</strong> ETHERNET Programmable Fieldbus4.5 Subprogram "UserLED"Required library "Visual.lib"!You must have the "Visual.lib" library to activate the USR-LED using thefunctions described below.This library is located in the directory:WAGO Software > CoDeSys V2.3 > Targets > WAGO > Libraries > 32_BitThe "UserLED" subprogram is located in the Visualization folder. The"UserLED" subprogram activates the USR-LED fieldbus controller. Changing theUSR-LED colors is carried out using a button in the visualization. This LED canbe displayed in green, red and orange.Figure 36: "UserLED" programFurther information for activation of the USR-LEDActivation of the USR-LED is only explained with an example in this section. Formore detailed information about USR-LED signaling and about using the"Visual.lib", the corresponding library description will be of assistance.The help file for this description is located in the WAGO-I/O-PRO directory:WAGO Software > CoDeSys V2.3 > Targets > WAGO > Help > German > CAA-WAGO_Visual.chm.<strong>Quickstart</strong> ReferenceVersion 1.1.0
Change language