Fractionation Tray and Hardware - Raschig GmbH - Raschig.de
Fractionation Tray and Hardware - Raschig GmbH - Raschig.de Fractionation Tray and Hardware - Raschig GmbH - Raschig.de
Fractionation Tray and Hardware Product Bulletin 400 Superior performance by design Raschig GmbH - Jaeger Products, Inc
- Page 2 and 3: TABLE OF CONTENTS Raschig Jaeger Te
- Page 4 and 5: Comparison of Various Packed Column
- Page 6 and 7: Quality Tray Products Tray Selectio
- Page 8 and 9: Conventional Fractionation Trays Va
- Page 10 and 11: Specialty Trays Dualflow Trays Dual
- Page 12 and 13: Valve Units RJ-V1, 1716 Valve, 16 G
- Page 14 and 15: DESCRIPTION 3/8"X 2" LG -16 UNC Thr
- Page 16 and 17: DESCRIPTION RJ-3 Lock Clamp 3/16" T
- Page 18 and 19: DESCRIPTION RJ-GW1, 1/16" x 3/8" ID
- Page 20: 100 General Product Information 200
<strong>Fractionation</strong> <strong>Tray</strong> <strong>and</strong> <strong>Hardware</strong><br />
Product Bulletin 400<br />
Superior performance by <strong>de</strong>sign<br />
<strong>Raschig</strong> <strong>GmbH</strong> - Jaeger Products, Inc
TABLE OF CONTENTS<br />
<strong>Raschig</strong> Jaeger Technologies 2<br />
Comparison of Various Packed Column Internals 3<br />
Services 4<br />
Valve Types 5<br />
<strong>Tray</strong> Selection/Materials of Construction 6<br />
Conventional <strong>Fractionation</strong> <strong>Tray</strong>s 7<br />
Valve <strong>Tray</strong>s<br />
Sieve <strong>Tray</strong>s<br />
Bubble Cap <strong>Tray</strong>s<br />
High Capacity <strong>Tray</strong>s 8<br />
NYE <strong>Tray</strong>s<br />
EC Technology<br />
CoFlo <strong>Tray</strong>s <strong>Tray</strong>s<br />
Specialty <strong>Tray</strong>s 9<br />
Dualflow <strong>Tray</strong>s<br />
Si<strong>de</strong>-to-Si<strong>de</strong> Baffle <strong>Tray</strong>s<br />
Disc & Donut <strong>Tray</strong>s<br />
Special Design Features 10<br />
Valve Units 11<br />
Assembly Part Numbers 12-18<br />
Product Bulletin-400<br />
Page 1
<strong>Raschig</strong> Jaeger Technologies – September 2006<br />
Product Bulletin-400<br />
Page 2<br />
In or<strong>de</strong>r to establish a new alliance in mass transfer business RASCHIG <strong>GmbH</strong> <strong>and</strong> its parent company<br />
PMC GLOBAL INC have acquired JAEGER PRODUCTS INC., a Houston Texas based company, which is<br />
a major manufacturer of tower packings, column internals <strong>and</strong> speciality trays <strong>and</strong> very active in the Mass<br />
Transfer <strong>and</strong> Environmental Business.<br />
RASCHIG JAEGER will be integrated into the PMC network of highly specialized, internationally operating<br />
companies <strong>and</strong> will therefore be better prepared to meet increased globalization <strong>and</strong> further improved<br />
customer orientation. Wherever in the world – in all continents – RASCHIG JAEGER is on the spot.<br />
Synergies<br />
This strategic acquisition combining RASCHIG <strong>and</strong> JAEGER into one larger group gives a great advantage<br />
to our customers giving them access to products of both entities in Europe, The Americas <strong>and</strong> in other parts<br />
of the world. It will create new dimensions in mass transfer technology. The advantages of our process<br />
engineering know-how <strong>and</strong> our technologies benefit even more the planning, mo<strong>de</strong>rnization <strong>and</strong><br />
construction of our clients’ processes. And: saving energy <strong>and</strong> investment cost is part of it.<br />
The new alliance offers a diverse array of products to meet the mass transfer needs of the industries. While<br />
specializing in high performance products, the comprehensive products line of RASCHIG JAEGER also<br />
inclu<strong>de</strong>s traditional fractional trays as well as structured <strong>and</strong> r<strong>and</strong>om packing types that best fit the<br />
application.<br />
Leading In-house distributor test-facility<br />
The company operates one of the largest in-house distributor test-facilities worldwi<strong>de</strong>. Liquid distributors<br />
can be tested up to 12m in diameter at a maximum liquid load of 2400m 3 per hour.<br />
All products of RASCHIG JAEGER are the result of consistent <strong>de</strong>velopment work long years of experience.<br />
Comprehensive quality management in all stages of production <strong>and</strong> the principle of offering complete<br />
solutions are the basis of our excellent reputation – worldwi<strong>de</strong>.
Comparison of Various Packed Column Internals<br />
Product Bulletin-400<br />
Page 3<br />
In the last few years our industry has consolidated through varies acquisitions <strong>and</strong> mergers. Because of<br />
these business activities part numbers for varies items have become difficult to follow. In an effort help<br />
everyone with this conversion the chart below is provi<strong>de</strong>d. The information for <strong>Raschig</strong> <strong>and</strong> Jaeger is very<br />
accurate; however, because of some unique <strong>de</strong>sign characteristics some part numbers could be interpreted<br />
using slightly different numbers.<br />
The information provi<strong>de</strong>d for the other vendors is our best effort to convert there system to “fit” our<br />
numbering system; again this information is subject to some interpretation due to constantly changing<br />
<strong>de</strong>signs.<br />
At best this information should be used as a starting point or a gui<strong>de</strong>. Do to the nature of the information<br />
we cannot guarantee its accuracy.<br />
Internals <strong>Raschig</strong> Jaeger Sulzer CT Old Norpro Koch-Glitsch-Norpro<br />
Liquid Distributor /<br />
Redistributor<br />
DR 2 LD1, CR1 VSL, VSI, VSH 106, 845, 107 301A, 301B, 906<br />
DR 3 LD5, CR5 798 301A, 301B, 905<br />
DT 1 LD4 VEG, VKG 126, 1016 126, 320, 926<br />
DT 1 (1) LD4 (1) VKR 136 136, 321, 986<br />
DT 2 (2) LD4 (2) MTS, VEL, VEP 806 310, 302, 806, 985<br />
DT 2 (1) LD4 (2) MTS, VEL, VEP 126, 1016, 127, 1017<br />
RP 2 LD1, CR1 116, 816, 117, 817 301A & D, 916, 917<br />
RP 2 (1) LD2, CR2 116, 1006, 117, 851, 1007 301B & D, 116, 117<br />
DP 1 LD3, LD7 VRG 844, 141 304, 330, 342, 941<br />
DP-S LD6 VRD 1044 344, 305, 1044, 943<br />
DT-S LD4 (1) VEL, VEP 136, 137 312, 312S<br />
DT-MF LD-MF VKRPW 996<br />
Feed Pipe DP-P FP1 VR, LV 119, 129, 719, 729 340, 119, 719<br />
Gas GV 1 GD3 GIO, GIG 196, 198 342, 746<br />
Distributor GV 2 GDS Vane Type GIV 194 351, 768<br />
GV 3 GD2 SK 896 716<br />
Flash Device FB 1 FP1 (3) 655 300, 745<br />
FB 2 855 705<br />
FB 3 LRR, LRP 755 341, 755<br />
FB 3/RP 2 898 300<br />
Bed Limiter - R<strong>and</strong>om HP 1 BL1 RPB 103, 823 401<br />
- R<strong>and</strong>om HP 2 BL1 402<br />
- Structured HP-P BL2 HE, HS 133 403<br />
Support Plate - R<strong>and</strong>om SP 1 PS1 GIS 804, 819, 1019 101R, 804<br />
- R<strong>and</strong>om SP 2, SP 3 PS1 EMS 809, 818 101, 103, 814, 824<br />
- Structured SP-P PS2 TEB, TSB 134 102, 802<br />
SP-HG 104<br />
SP 1/ RP 2 201A, 201B<br />
Liquid CV 1 CT3, CRS SLR 633 510, 511<br />
Collector CP 1 CT1 SK 733 501<br />
CP 2 CT2 SK 833 501<br />
Liq-Liq extraction DSP 1 834 600<br />
(internals not in <strong>Raschig</strong><br />
HB)<br />
(1) Drip tubes in troughs<br />
(2) Notches with drip tubes<br />
(3) Flash Device<br />
DSP 2 835 600<br />
DP-P 644, 744
Services<br />
<strong>Raschig</strong> Jaeger specializes in the <strong>de</strong>sign <strong>and</strong> manufacture<br />
of mass transfer equipment for the Chemical Process<br />
Industries (CPI). Our primary tray products inclu<strong>de</strong><br />
conventional sieve, valve, <strong>and</strong> bubble cap trays; packed<br />
internals such as liquid distributors, chimney trays, packing<br />
support plates, <strong>and</strong> holddowns; <strong>and</strong> multiple styles of r<strong>and</strong>om<br />
<strong>and</strong> structural packing.<br />
<strong>Raschig</strong> Jaeger also offers specialty trays such as high<br />
capacity trays, high uplift strength trays, dual flow, disc & donut,<br />
<strong>and</strong> si<strong>de</strong>to-si<strong>de</strong> baffle trays.<br />
Our products are backed by <strong>de</strong>ca<strong>de</strong>s of experience <strong>and</strong><br />
employees committed to quality, excellence, <strong>and</strong> service.<br />
<strong>Raschig</strong> Jaeger, a member of FRI (<strong>Fractionation</strong> Research<br />
Institute) has a staff fully capable of providing complete<br />
hydraulic <strong>and</strong> mechanical <strong>de</strong>sign of any new equipment<br />
required to suit all your needs. Process <strong>de</strong>signs are ma<strong>de</strong><br />
based on proven concepts. Our computerized mechanical<br />
engineering <strong>and</strong> fabricated systems are integrated to permit<br />
efficient <strong>and</strong> accurate processing of or<strong>de</strong>rs.<br />
<strong>Raschig</strong> Jaeger focuses on effective <strong>de</strong>sign, responsive<br />
service, <strong>and</strong> efficient manufacturing. Whether small diameter or<br />
large, new construction, revamp or replacement, we will<br />
provi<strong>de</strong> reliable solutions to our customer’s requirements at an<br />
economical price.<br />
Product Bulletin-400<br />
Page 4<br />
To compliment <strong>Raschig</strong> Jaeger’s<br />
product line of tray internals, we also<br />
supply replacement parts <strong>and</strong><br />
installation hardware. <strong>Raschig</strong> Jaeger’s<br />
hardware response group is <strong>de</strong>dicated<br />
to our customer’s immediate <strong>and</strong> future<br />
requirements for replacement hardware.<br />
Our inventory is maintained <strong>and</strong> staffed<br />
by experienced personnel <strong>de</strong>dicated to<br />
quality, service <strong>and</strong> customer<br />
satisfaction.
Quality <strong>Tray</strong> Products<br />
<strong>Tray</strong> Selection<br />
Product Bulletin-400<br />
Page 5<br />
<strong>Tray</strong> type selection is generally accomplished by balancing various process <strong>and</strong> mechanical<br />
consi<strong>de</strong>rations. Major mechanical <strong>and</strong> process factors taken into consi<strong>de</strong>ration inclu<strong>de</strong> capacity,<br />
efficiency, turndown, pressure drop, susceptibility to corrosion <strong>and</strong> fouling, <strong>and</strong> actual experience in the<br />
system.<br />
What may be an overriding consi<strong>de</strong>ration in one case may be unimportant in another; therefore,<br />
each situation must be examined on its own merits. With the exception of special licensed tray<br />
technologies, <strong>Raschig</strong> Jaeger has the capability to produce virtually any type of conventional or specialty<br />
tray type<br />
<strong>Tray</strong> Type<br />
Sieve<br />
Moving Valve<br />
High Capacity Valve<br />
Fixed Valve<br />
Bubble Cap<br />
Dual Flow<br />
Baffle<br />
Disc & Donut<br />
NYE<br />
EC Technology<br />
CoFlo<br />
GENERAL TRAY CLASSIFICATION<br />
Capacity<br />
Medium<br />
Medium<br />
High<br />
Medium<br />
Low<br />
High<br />
High<br />
High<br />
High<br />
Very High<br />
Ultra High<br />
Efficiency<br />
Very High<br />
Very High<br />
Very High<br />
Very High<br />
Very High<br />
Medium<br />
Very Low<br />
Very Low<br />
High<br />
Very High<br />
High<br />
Materials of Construction<br />
Turndown<br />
Medium<br />
Very High<br />
Very Low<br />
Medium<br />
Medium<br />
Medium<br />
Medium<br />
Medium<br />
Very Low<br />
Very Low<br />
Medium<br />
Medium<br />
<strong>Raschig</strong> Jaeger trays can be fabricated from numerous types of materials. In addition to working<br />
with the most common carbon, ferritic, <strong>and</strong> austenitic steels, we also work with many exotic materials<br />
such as Hastelloy® alloys, titanium <strong>and</strong> specialty duplex stainless steels. A brief listing of acceptable<br />
materials of construction inclu<strong>de</strong>:<br />
Low<br />
High<br />
Medium<br />
Pressure Drop<br />
Low<br />
Medium<br />
Medium<br />
Low<br />
High<br />
Low<br />
High<br />
carbon steel 321 stainless steel Inconel®<br />
410S stainless steel 347 stainless steel nickel<br />
304L stainless steel 904L stainless steel titanium<br />
316L stainless steel Hastelloy® alloy 2205<br />
317L stainless steel Monel® alloy 2<br />
Fouling Resistance<br />
Medium<br />
Low<br />
Low<br />
High<br />
Low<br />
High<br />
Very High<br />
Very High<br />
Medium<br />
Low<br />
Low
RJ-V1<br />
1-Piece Moving Valve<br />
RJ-A1<br />
3-Piece High Turndown Caged Valve<br />
RJ-A2<br />
2-Piece Caged Valve<br />
RJ-A3<br />
2-Piece Caged Valve<br />
RJ-MMV<br />
High Capacity Mini Valve<br />
RJ-SVG<br />
Rectangular Fixed Valve<br />
Valve Types<br />
RJ-V4<br />
RJ-V1 with Venturi Orifice<br />
RJ-A4<br />
RJ-A1 with Venturi Orifice<br />
RJ-A5<br />
RJ-A2 with Venturi Orifice<br />
RJ-A6<br />
RJ-A3 with Venturi Orifice<br />
RJ-MV<br />
High Capacity Fixed Mini Valve<br />
RJ-V0<br />
Round Fixed Valve<br />
Valve Variations: leg length, anti-spin tabs, flush seating, alternate weights<br />
Fixed Valve Variations: net rise (curtain area)<br />
Product Bulletin-400<br />
Page 6
Conventional <strong>Fractionation</strong> <strong>Tray</strong>s<br />
Valve <strong>Tray</strong>s<br />
<strong>Raschig</strong> Jaeger offers a vast array of conventional <strong>and</strong> High<br />
Capacity moving <strong>and</strong> fixed valve types to meet all of our<br />
customer’s needs. The single piece RJ-V1 is our st<strong>and</strong>ard<br />
moving valve <strong>and</strong> is recommen<strong>de</strong>d for many applications. The<br />
RJ-V1 incorporates tabs to raise the main body of the valve off of<br />
the tray floor thereby reducing the chance of sticking. <strong>Raschig</strong><br />
Jaeger manufactures many types of 1 piece, 2 piece cage <strong>and</strong><br />
disc (RJ-A2 or RJ-A3), <strong>and</strong> 3 piece high turndown (RJ-A1) valve<br />
units with thickness, material type, <strong>and</strong> leg lengths as nee<strong>de</strong>d to<br />
meet any process <strong>and</strong> mechanical conditions required. Additional<br />
variations inclu<strong>de</strong> extru<strong>de</strong>d tray floor openings to reduce<br />
pressure drop <strong>and</strong> multiple valve weights to permit uniform<br />
operation over a wi<strong>de</strong>r operating range. See section -- for a<br />
complete listing <strong>and</strong> <strong>de</strong>scription of our most common styles<br />
Sieve <strong>Tray</strong>s<br />
Product Bulletin-400<br />
Page 7<br />
Sieve trays began to dominate the CPI’s mass <strong>and</strong> heat<br />
transfer applications in the 1950’s. Prior to that, bubble cap trays<br />
were the industry’s workhorse. The sieve tray is a flat perforated<br />
plate. If extreme turndown conditions are not required, sieve trays<br />
will likely meet your process performance objective. Additionally,<br />
sieve trays have better anti-fouling characteristics <strong>and</strong> lower<br />
pressure drop when compared to st<strong>and</strong>ard moveable valve trays.<br />
<strong>Raschig</strong> Jaeger has the capability to provi<strong>de</strong> virtually any type of<br />
sieve tray. Perforation sizes as small as 1/8” in diameter are<br />
offered<br />
Bubble Cap <strong>Tray</strong>s<br />
<strong>Raschig</strong> Jaeger <strong>de</strong>signs <strong>and</strong> provi<strong>de</strong>s numerous variations<br />
of bubble cap trays. Our most common <strong>de</strong>signs inclu<strong>de</strong><br />
conventional slotted caps <strong>and</strong> the st<strong>and</strong>ard FRI solid cap (no<br />
slots). St<strong>and</strong>ard cap sizes are 3”, 4”, <strong>and</strong> 6”. Of course, custom<br />
<strong>de</strong>signs are available as well. Typical manufacturing methods to<br />
secure the riser <strong>and</strong> cap assembly to the tray floor inclu<strong>de</strong><br />
extrusion <strong>and</strong> press fitting, seal welding, <strong>and</strong> pull-through bolting<br />
connections.<br />
Bubble cap trays usually have a lower capacity (10-20<br />
percent) than properly <strong>de</strong>signed valve or sieve trays; however, they<br />
are capable of efficient performance over a wi<strong>de</strong>r operating range<br />
due to their superior leak proof characteristics.<br />
Although some bubble cap tray towers have been<br />
retrofitted with the more mo<strong>de</strong>rn three piece RJ-A1 valve unit,<br />
bubble caps still enjoy wi<strong>de</strong>-spread industrial application in<br />
systems where low liquid rates <strong>and</strong> large variations in vapor<br />
loadings are present
High Capacity <strong>Tray</strong>s<br />
NYE TRAYS®<br />
Product Bulletin-400<br />
Page 8<br />
<strong>Raschig</strong> Jaeger recommends high capacity NYE TRAYS when conventional trays fall short. They<br />
have been successfully used in hundreds of installations since the 1980’s <strong>and</strong> incorporate advanced<br />
technology to increase the capacity of columns by 10 to 30% over conventional trays. NYE TRAYS<br />
achieve these improvements by use of a special inlet area <strong>de</strong>sign that reduces tray pressure drop <strong>and</strong><br />
increases the available area for vapor/liquid contacting. NYE TRAYS are a good general purpose high<br />
capacity tray as they are well suited for a wi<strong>de</strong> variety of mass <strong>and</strong> heat transfer services. Most revamps<br />
can be accomplished with little or no welding to the vessel. NYE TRAYS are also well adapted to upset<br />
prone services where upgra<strong>de</strong>d mechanical strength is required.<br />
EC Technology<br />
<strong>Tray</strong>s equipped with EC (entrainment capture) Technology can achieve capacity increases up to<br />
50% over conventional fractionation tray <strong>de</strong>signs. The maximum benefit is realized for trays that are<br />
limited by entrainment flooding mechanisms. However, downcomer limited systems can also be<br />
<strong>de</strong>bottlenecked because less area needs to be allocated for liquid/vapor contacting on the <strong>de</strong>ck. EC<br />
Technology can be integrated with any tray <strong>de</strong>ck contacting <strong>de</strong>vice (valve, fixed valve, sieve, bubble<br />
cap) <strong>and</strong> is compatible with any flow pass configuration. <strong>Tray</strong>s with EC Technology have equal or better<br />
separation efficiency compared to conventional trays due to enhanced vapor/liquid contacting within the<br />
entrainment capture zone .<br />
CoFlo <strong>Tray</strong>s<br />
The CoFlo TM <strong>Tray</strong> is a Ultra High Capacity gas-liquid contacting <strong>de</strong>vice. Performance tests<br />
<strong>de</strong>monstrate 100+% capacity increases over conventional fractionation trays while maintaining excellent<br />
contact efficiencies. Each tray consists of three components: a liquid disperser, the contacting zone, <strong>and</strong><br />
the liquid/vapor separator. High capacities are achieved due to cocurrent flow of liquid <strong>and</strong> vapor phases<br />
through the contacting zone. CoFlo trays are i<strong>de</strong>ally suited for <strong>de</strong>bottlenecking where an existing tower<br />
can be used in lieu of replacement with a larger diameter. <strong>Tray</strong> components are modular <strong>and</strong> self<br />
supporting <strong>and</strong> in most cases can be fitted onto existing support rings <strong>and</strong> downcomer bars. Cartridge<br />
construction is recommen<strong>de</strong>d for column diameters < 30in (762mm).
Specialty <strong>Tray</strong>s<br />
Dualflow <strong>Tray</strong>s<br />
Dualflow trays are sieve trays that do not have<br />
downcomers. The entire active or bubbling area is<br />
perforated with holes with typical hole sizes ranging<br />
from 1/2” - 1” in diameter. Vapor <strong>and</strong> liquid countercurrently<br />
flow through the perforations; hence, the<br />
name Dualflow. Un<strong>de</strong>r normal operating conditions,<br />
liquid splashes about on top of the tray in a wave-like<br />
manner. Liquid flows downward momentarily through<br />
perforations in the areas of wave crests whereas<br />
vapor flows upward through perforations in the area<br />
between crests.<br />
High open area dualflow trays have a higher<br />
capacity <strong>and</strong> lower pressure drop compared to<br />
conventional fractionation trays at the same tray<br />
spacing <strong>and</strong> are particularly well suited to systems<br />
containing a mo<strong>de</strong>rate to high level of solids or where<br />
polymerizable compounds are present. The main<br />
disadvantage of dualflow trays is their narrow efficient<br />
operating range. The majority of industrial applications<br />
are more common in small to mo<strong>de</strong>rate tower<br />
diameters. However, large diameter <strong>de</strong>signs have also<br />
been employed. Levelness is especially important with<br />
dual-flow trays. <strong>Tray</strong>s which are not level potentially<br />
suffer from gross liquid <strong>and</strong> vapor flow partitioning<br />
through the <strong>de</strong>ck<br />
Baffle <strong>and</strong> Disc & Donut <strong>Tray</strong>s<br />
Si<strong>de</strong>-to-si<strong>de</strong> baffle trays <strong>and</strong> disc & donut trays<br />
are arranged in a tower in such a manner that the liquid<br />
<strong>and</strong> vapor contacting is accomplished by vapor passing<br />
through a curtain of liquid falling from one tray to the<br />
next or through rivulets of liquid flowing through<br />
perforations in the tray <strong>de</strong>ck. <strong>Tray</strong> <strong>de</strong>cks are flat or<br />
slightly inclined plates that occupy 40-60 percent of the<br />
tower area. Designs which incorporate perforated<br />
<strong>de</strong>cks are typically 40 percent open so that there is<br />
sufficient overlap between adjacent rows of plates.<br />
For a given tray spacing, both types of trays<br />
have a higher capacity <strong>and</strong> lower pressure drop than<br />
conventional sieve or valve trays or even dualflow<br />
trays; however, their liquid/vapor contacting efficiency<br />
is significantly lower. Baffle trays <strong>and</strong> disc & donut trays<br />
are particularly well suited to heavy fouling systems<br />
due to their extremely high open area. Typical<br />
applications inclu<strong>de</strong> heavy oil refining <strong>and</strong><br />
petrochemical heat transfer services having a high<br />
solid <strong>and</strong>/or petroleum coke content. <strong>Raschig</strong> Jaeger<br />
can provi<strong>de</strong> any of these specialty trays with<br />
mechanically robust features to improve resistance to<br />
dislodging<br />
Product Bulletin-400<br />
Page 9
Special Design Features<br />
Product Bulletin-400<br />
Page 10<br />
<strong>Raschig</strong> Jaeger offers a full complement of mo<strong>de</strong>rn tray features to permit an optimized solution to<br />
almost any tray <strong>de</strong>sign challenge. Process <strong>and</strong>/or mechanical consi<strong>de</strong>rations dictate when special features<br />
are required. Our experienced process <strong>de</strong>sign team un<strong>de</strong>rst<strong>and</strong>s these requirements so that our<br />
customer’s needs are realized<br />
Downcomer Designs<br />
In addition to the st<strong>and</strong>ard chordal / segmental <strong>de</strong>sign, <strong>Raschig</strong> Jaeger also offers multichordal,<br />
circular, <strong>and</strong> envelope styles<br />
Anti-Jump Baffles<br />
Anti-jump baffles are used on 2, 3 <strong>and</strong> 4 pass trays. Their purpose is to prevent the liquid which is<br />
flowing across the tray from jumping over the downcomer onto the opposing flow path. This condition<br />
primarily occurs when the width of the center or off-center downcomer is small <strong>and</strong> the tray loading is high<br />
Picket Fence Weirs<br />
Picket-fence weirs are <strong>de</strong>vices used to artificially increase the effective liquid height on the bubbling<br />
area <strong>and</strong> reduce blowing. They are commonly used when the liquid flow over the weir < 1 gpm/in (8.94<br />
m3/hr m). Alternately, the picket fence weir is used on multipass trays to achieve hydraulic balance<br />
between the passes. The picket-fence weir is constructed of either a continuous metal plate having<br />
rectangular notches or by attaching individual baffles to the weir at a uniform spacing<br />
Recessed Inlet Pans<br />
Recessed inlet pans are used in conjunction with sloped downcomers to reduce the head loss un<strong>de</strong>r<br />
the downcomer. Sloped downcomers with recessed inlet pans are primarily used in heavy liquid loa<strong>de</strong>d<br />
services prone to downcomer backup flooding.<br />
Swept-Back Weirs<br />
Swept-back weirs are used on si<strong>de</strong> downcomers to reduce the effective liquid height on the tray by<br />
lowering the volumetric liquid flow rate per unit length of outlet weir. They can also be used in multipass<br />
tray <strong>de</strong>sign to balance weir loads between the si<strong>de</strong> <strong>and</strong> off-center or si<strong>de</strong> <strong>and</strong> center downcomers of 3 <strong>and</strong><br />
4 pass trays, respectively.<br />
Splash Baffles<br />
Splash baffles are <strong>de</strong>vices utilized in very low liquid rate services as either an alternative or<br />
complement to picket-fence weirs. Splash baffles consist of a metal plate oriented vertically <strong>and</strong> parallel to<br />
the overflow weir having a 1/2” - 1” setback away from the weir above the tray <strong>de</strong>ck. The purpose of the<br />
splash baffle is to maximize the liquid retention time on the tray
Valve Units<br />
RJ-V1, 1716 Valve, 16 Ga.<br />
RJ-V1, 1714 Valve, 14 Ga.<br />
RJ-A1, Assembly 1116 Travel Stop, 16 Ga.<br />
RJ-A1, Assembly 1114 Travel Stop, 14 Ga.<br />
RJ-A1, Assembly 2116 Valve Plate, 16 Ga.<br />
RJ-A1, Assembly 2114 Valve Plate, 14 Ga.<br />
RJ-A1, Assembly 3220 Orifice Cover, 20 Ga.<br />
RJ-A1, Assembly 3218 Orifice Cover, 18 Ga.<br />
RJ-A2, Assembly 2216 Valve Plate, 16 Ga.<br />
RJ-A2, Assembly 2214 Valve Plate, 14 Ga.<br />
RJ-A2, Assembly 1216 Travel Stop, 16 Ga.<br />
RJ-A2, Assembly 1214 Travel Stop, 14 Ga.<br />
RJ-A3,<br />
RJ-A3,<br />
RJ-A4,<br />
RJ-A4,<br />
RJ-A5,<br />
RJ-A5,<br />
RJ-A6,<br />
RJ-A6,<br />
RJ-V4,<br />
RJ-V4,<br />
RJ-MMV,<br />
RJ-MV,<br />
RJ-SVG,<br />
RJ-V0<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
For Valve Styles not listed, contact Jaeger Products for availability.<br />
Product Bulletin-400<br />
Page 11<br />
The installation hardware, replacement valves, <strong>and</strong> conventional fractionation trays shown in this<br />
brochure represent the typical tray <strong>de</strong>sign used in the industry. Other existing hardware styles may differ<br />
in appearance from those <strong>de</strong>picted in the booklet; however the application is generally the same<br />
DESCRIPTION STOCK MATERIAL<br />
1A-1 Valve Assembly Travel Stop<br />
Valve Plate<br />
2V-1 Valve<br />
1A-2 Valve Assembly<br />
Travel Stop<br />
Orifice Cover<br />
Valve Plate
INSTALLATION HARDWARE<br />
Hex Nut<br />
Hex Bolt<br />
DESCRIPTION<br />
3/8" -16 UNC Thread<br />
1/2" -13 UNC Thread<br />
5/8" -11 UNC Thread<br />
3/4" -10 UNC Thread<br />
3/8"X 1" LG -16 UNC Thread<br />
3/8"X 1-1/2" LG -16 UNC Thread<br />
3/8"X 2" LG -16 UNC Thread<br />
3/8"X 2-1/2" LG -16 UNC Thread<br />
3/8"X 3" LG -16 UNC Thread<br />
1/2"X 1" LG -13 UNC Thread<br />
1/2"X 1-1/2" LG -13 UNC Thread<br />
1/2"X 2" LG -13 UNC Thread<br />
1/2"X 2-1/2" LG -13 UNC Thread<br />
1/2"X 3" LG -13 UNC Thread<br />
5/8"X 2" LG -11 UNC Thread<br />
5/8"X 3" LG -11 UNC Thread<br />
3/4"X 2" LG -10 UNC Thread<br />
3/4"X 3" LG -10 UNC Thread<br />
Product Bulletin-400<br />
Page 12<br />
STOCK MATERIAL<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
C. S., T410SS, T304L, T316L<br />
Other specific material types of hardware available upon request
DESCRIPTION<br />
3/8"X 2" LG -16 UNC Thread<br />
3/8"X 2-1/2" LG -16 UNC Thread<br />
3/8"X 3" LG -16 UNC Thread<br />
3/8" ID , Split Lock Washer<br />
1/2" ID , Split Lock Washer<br />
14 Ga., 7/16" ID x 1" OD for 3/8" Bolts<br />
12 Ga., 7/16" ID x 1" OD for 3/8" Bolts<br />
12 Ga., 9/16" ID x 1-1/2" OD for 1/2" Bolts<br />
12 Ga., 11/16" ID x 1-1/2" OD for 5/8" Bolts<br />
14 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts<br />
12 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts<br />
12 Ga., 7/16" ID x 1-1/2" OD for 3/8" Bolts<br />
12 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts<br />
12 Ga., 7/16" ID x 2" OD for 3/8" Bolts<br />
10 Ga., 7/16" ID x 1-1/2" OD for 3/8" Bolts<br />
10 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts<br />
10 Ga., 7/16" ID x 2" OD for 3/8" Bolts<br />
10 Ga., 9/16" ID x 1-3/4" OD for 1/2" Bolts<br />
10 Ga., 9/16" ID x 2" OD for 1/2" Bolts<br />
10 Ga., 11/16" ID x 2" OD for 5/8" Bolts<br />
1/4 "T., 7/16" ID x 1-3/4" OD for 3/8" Bolts<br />
1/4 "T., 9/16" ID x 2" OD for 1/2" Bolts<br />
1/4 "T., 11/16" ID x 2" OD for 5/8" Bolts<br />
STOCK MATERIAL<br />
C. S. T410SS, T304L, T316L<br />
C. S. T410SS, T304L, T316L<br />
C. S. T410SS, T304L, T316L<br />
C. S. T304, T316<br />
C. S. T304, T316<br />
T410, T304L, T316L<br />
Carbon Steel<br />
C. S., T410, T304L, T316L<br />
C. S., T410, T304L, T316L<br />
T410, T304L, T316L<br />
Carbon Steel<br />
Other specific material types of hardware available upon request<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
C. S. T410, T304L, T316L<br />
Product Bulletin-400<br />
Page 13<br />
Dog Point Bolts<br />
Split Lock Washers<br />
<strong>Tray</strong> Washers<br />
Domed Washers<br />
Frictional Washers
DESCRIPTION<br />
RJ-12 Seal Plate, 12 Ga. 3" Long<br />
RJ-12A Seal Plate, 12 Ga. 3-1/2" Long<br />
RJ-12B Seal Plate, 12 Ga. 4" Long<br />
RJ-12C Seal Plate, 12 Ga. 4-1/2" Long<br />
RJ-12D Seal Plate, 12 Ga. 5" Long<br />
RJ-12X Seal Plate, 12 Ga. Variable Length<br />
RJ-10 Seal Plate, 10 Ga. 3" Long<br />
RJ-10A Seal Plate, 10 Ga. 3-1/2" Long<br />
RJ-10B Seal Plate, 10 Ga. 4" Long<br />
RJ-10C Seal Plate, 10 Ga. 4-1/2" Long<br />
RJ-10D Seal Plate, 10 Ga. 5" Long<br />
RJ-10X Seal Plate, 10 Ga. Variable Length<br />
RJ-10 Angle Hanger, 10 Ga. 5" Long<br />
RJ-20 Angle Hanger, 10 Ga. 6" Long<br />
RJ-30 Angle Hanger, 10 Ga. Length Variable<br />
RJ-8 Clip Angle, 14 Ga.<br />
RJ-9 Clip Angle, 12 Ga.<br />
RJ-10 Clip Angle, 10 Ga.<br />
RJ-45 Lock Clamp 12 Ga., for 3/8”<br />
Shaved Stud<br />
RJ-45A Lock Clamp 10 Ga., for 3/8“<br />
Shaved Stud<br />
RJ-40A Lock Clamp 3/16" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40B Lock Clamp 1/4" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40C Lock Clamp 5/16" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40D Lock Clamp 3/8" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40E Lock Clamp 1/2" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40F Lock Clamp 5/8" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40G Lock Clamp 3/4" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40H Lock Clamp 7/8" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
RJ-40X Lock Clamp 1" Lip 12 Ga.,<br />
for 3/8" Shaved Stud<br />
STOCK MATERIAL<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
Product Bulletin-400<br />
Page 14<br />
Seal Plates<br />
Angle Hangers<br />
Clip Angles<br />
Manway Lock Clamps<br />
Manway Lock Clamps
DESCRIPTION<br />
RJ-3 Lock Clamp 3/16" T.,<br />
for 3/8" Shaved Stud<br />
RJ-3A Lock Clamp Stud 1/4” T.,<br />
for 3/8" Shaved Stud<br />
RJ-2 Lock Clamp 3/16" T.,<br />
for 3/8" Shaved Stud<br />
RJ-2A Lock Clamp 1/4” T.,<br />
for 3/8" Shaved Stud<br />
RJ-5 Manway Stud 3/8"- 16 UNC x 2" LG<br />
Shaved Stud<br />
RJ-7 Manway Stud 3/8"- 16 UNC x 2-1/2" LG<br />
Shaved Stud<br />
RJ-8 Manway Stud 1/2"- 13 UNC x 2-1/2" LG<br />
Shaved Stud<br />
RJ-9 Manway Stud 1/2"- 13 UNC x 3" LG<br />
Shaved Stud<br />
LJ-50 Bottom Clamp 12 Ga., for 3/8" Bolt<br />
LJ-50A Bottom Clamp 10 Ga., for 3/8" Bolt<br />
RJ-51 Bottom Clamp 12 Ga.,<br />
with 3/8"-16UNC Nut<br />
RJ-51A Bottom Clamp 10 Ga.,<br />
with 3/8"-16UNC Nut<br />
Nut wel<strong>de</strong>d in place on top si<strong>de</strong> of clamp<br />
STOCK MATERIAL<br />
C. S T410, T304L, T316L<br />
C.S.<br />
C. S T410, T304L, T316L<br />
C.S.<br />
Other specific material types of hardware available upon request<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
Product Bulletin-400<br />
Page 15<br />
Manway Lock Clamps<br />
Manway Lock Clamps<br />
Manway Studs<br />
Bottom <strong>Tray</strong> Clamps<br />
Bottom <strong>Tray</strong> Clamps
DESCRIPTION<br />
RJ-52 Bottom Clamp 12 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-52A Bottom Clamp 10 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-52S Bottom Clamp 12 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-52SX Bottom Clamp 10 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-52Z Bottom Clamp 12 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-52ZX Bottom Clamp 10 Ga.,<br />
w / 3/8" x 3" -16 UNC Bolt<br />
RJ-20A-H Bottom Clamp 12 Ga.,<br />
3/16" to 7/8" Lip<br />
RJ-20J-P Bottom Clamp 12 Ga.,<br />
1" to 1-3/4" Lip<br />
RJ-22A-H Bottom Clamp 12 Ga.,<br />
3/16" to 7/8" Lip<br />
With 3/8"-16 UNC wel<strong>de</strong>d nut<br />
RJ-22J-P Bottom Clamp 12 Ga.,<br />
1" to 1-3/4" Lip<br />
With 3/8"-16 UNC wel<strong>de</strong>d nut<br />
RJ-23A-H Bottom Clamp 12 Ga.,<br />
3/16" to 7/8" Lip<br />
With 3/8"x 1-1/2" thru 2"-16 UNC wel<strong>de</strong>d bolt<br />
RJ-23J-P Bottom Clamp 12 Ga.,<br />
1" to 1-3/4" Lip<br />
With 3/8"x 1-1/2" thru 3"-16 UNC wel<strong>de</strong>d bolt<br />
RJ-H1, 3/8"-16UNC x 9.347" Lg.<br />
RJ-H2, 3/8"-16UNC x 6.750" Lg.<br />
Other specific material types of hardware available upon request<br />
STOCK MATERIAL<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
T410, T304L, T316L<br />
C. S., T304, T316<br />
C. S., T304, T316<br />
Product Bulletin-400<br />
Page 16<br />
Bottom <strong>Tray</strong> Clamp<br />
Bottom <strong>Tray</strong> Clamp<br />
Bottom <strong>Tray</strong> Clamp<br />
Hook Bolts
DESCRIPTION<br />
RJ-GW1, 1/16" x 3/8" ID. x 1" OD<br />
RJ-GW2, 1/16" x 3/8" ID. x 1-1/2" OD<br />
RJ-GW3, 1/16" x 3/8" ID. x 1-3/4" OD<br />
RJ-GW4, 1/16" x 3/8" ID. x 2" OD<br />
RJ-GW5, 1/16" x 3/8" ID. x 2-1/2" OD<br />
RJ-GW6, 1/8" x 3/8" ID. x 1" OD<br />
RJ-GW7, 1/8" x 3/8" ID. x 1-1/2" OD<br />
RJ-GW8, 1/8" x 3/8" ID. x 1-3/4" OD<br />
RJ-GW9, 1/8" x 3/8" ID. x 2" OD<br />
RJ-GW10, 1/8" x 3/8" ID. x 2-1/2" OD<br />
RJ-TG1, 1/16" x 1" wi<strong>de</strong> (NDW)<br />
RJ-TG2, 1/16" x 1-1/4" wi<strong>de</strong><br />
RJ-TG3, 1/16" x 1-1/2" wi<strong>de</strong><br />
RJ-TG4, 1/16" x 2" wi<strong>de</strong><br />
RJ-TG5, 1/16" x 2-1/2" wi<strong>de</strong><br />
RJ-TG6, 1/16" x 3" wi<strong>de</strong><br />
RJ-TG7, 1/8" x 1" wi<strong>de</strong> (NDW)<br />
RJ-TG8, 1/8" x 1-1/4" wi<strong>de</strong><br />
RJ-TG9, 1/8" x 1-1/2" wi<strong>de</strong><br />
RJ-TG10, 1/8" x 2" wi<strong>de</strong><br />
RJ-TG11, 1/8" x 2-1/2" wi<strong>de</strong><br />
RJ-TG12, 1/8" x 3" wi<strong>de</strong><br />
All sizes available in either Drop Warp or Non-Drop Warp:<br />
Exception is 1” Wi<strong>de</strong>, available in Non-Drop Warp only.<br />
STOCK MATERIAL<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
D-8080, Teflon, Neoprene<br />
TN9000, Greenguard<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber<br />
Product Bulletin-400<br />
Page 17<br />
Washer Gaskets<br />
Tape Gaskets
DESCRIPTION<br />
RJ-RSG1, 1/8" x 1/8" Square<br />
RJ-RSG2, 1/4" x 1/4" Square<br />
RJ-RSG3, 3/8" x 3/8" Square<br />
RJ-RSG4, 1/2" x 1/2" Square<br />
RJ-RSG5, 5/8" x 5/8" Square<br />
RJ-RSG6, 3/4" x 3/4" Square<br />
RJ-RSG7, 1" x 1“ Square<br />
RJ-RSG8, 1-1/8" x 1-1/8" Square<br />
RJ-RSG9, 1-1/4" x 1-1/4" Square<br />
RJ-RSG10, 1-1/2" x 1-1/2" Square<br />
RJ-RRG1, 1/8" Round<br />
RJ-RRG2, 1/4" Round<br />
RJ-RRG3, 3/8" Round<br />
RJ-RRG4, 1/2" Round<br />
RJ-RRG5, 5/8" Round<br />
RJ-RRG6, 3/4" Round<br />
RJ-RRG7, 1" Round<br />
RJ-RRG8, 1-1/8" Round<br />
RJ-RRG9, 1-1/4" Round<br />
RJ-RRG10, 1-1/2" Round<br />
STOCK MATERIAL<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Fiberglass, Teflon, Neoprene<br />
Ceramic Fiber, Gortex<br />
Other specific material types of hardware available upon request<br />
Product Bulletin-400<br />
Page 18<br />
Rope Gaskets
100 General Product Information<br />
200 Metal R<strong>and</strong>om - RSR<br />
300 Mist Eliminators – Wire Mesh<br />
400 <strong>Fractionation</strong> <strong>Tray</strong>s <strong>and</strong> <strong>Hardware</strong><br />
450 High Capacity – Nye <strong>Tray</strong>s<br />
475 High Capacity – CoFlo <strong>Tray</strong>s<br />
500 Metal Structured Packing – RSR<br />
525 Metal Structured Packing - MaxPak<br />
550 Plastic Structured Packing – RSP<br />
Locations / Production Sites<br />
Ludwigshafen <strong>and</strong> Espenhain,<br />
Germany<br />
Houston, Texas<br />
El Dorado, Kansas<br />
And Monterrey, Mexico.<br />
Furthermore we co-operate with reliable partners all over the world<br />
RASCHIG JAEGER TECHNOLOGIES<br />
Mun<strong>de</strong>nheimer Strasse 100<br />
67061 Ludwigshafen - Germany<br />
Phone: +49.62.5618-602 ∙ Fax: +49.621.5618-604<br />
email: hneis@raschig.<strong>de</strong> www.raschig.com<br />
600 Plastic R<strong>and</strong>om – Jaeger Tri-Pack/Hackentten<br />
625 Plastic R<strong>and</strong>om – RSR<br />
650 Plastic R<strong>and</strong>om – LPR<br />
675 Plastic R<strong>and</strong>om – Nor Pak<br />
700 Plastic R<strong>and</strong>om – Rings <strong>and</strong> Saddles<br />
800 Ceramic R<strong>and</strong>om Packing<br />
900 Winsorp Software<br />
1000 Process Information<br />
1100 Column Internals<br />
1200 Reactor Internals<br />
Jaeger Products, Inc.<br />
1611 Peachleaf Street<br />
Houston, TX 77039<br />
Phone: 281.449.9500 ∙ Fax: 281.449.9400<br />
800.678.0345 www.jaeger.com