Fractionation Tray and Hardware - Raschig GmbH - Raschig.de

Fractionation Tray and Hardware
Product Bulletin 400
Superior performance by design
Raschig GmbH - Jaeger Products, Inc

TABLE OF CONTENTS
Raschig Jaeger Technologies 2
Comparison of Various Packed Column Internals 3
Services 4
Valve Types 5
Tray Selection/Materials of Construction 6
Conventional Fractionation Trays 7
Valve Trays
Sieve Trays
Bubble Cap Trays
High Capacity Trays 8
NYE Trays
EC Technology
CoFlo Trays Trays
Specialty Trays 9
Dualflow Trays
Side-to-Side Baffle Trays
Disc & Donut Trays
Special Design Features 10
Valve Units 11
Assembly Part Numbers 12-18
Product Bulletin-400
Page 1

Raschig Jaeger Technologies – September 2006
Product Bulletin-400
Page 2
In order to establish a new alliance in mass transfer business RASCHIG GmbH and its parent company
PMC GLOBAL INC have acquired JAEGER PRODUCTS INC., a Houston Texas based company, which is
a major manufacturer of tower packings, column internals and speciality trays and very active in the Mass
Transfer and Environmental Business.
RASCHIG JAEGER will be integrated into the PMC network of highly specialized, internationally operating
companies and will therefore be better prepared to meet increased globalization and further improved
customer orientation. Wherever in the world – in all continents – RASCHIG JAEGER is on the spot.
Synergies
This strategic acquisition combining RASCHIG and JAEGER into one larger group gives a great advantage
to our customers giving them access to products of both entities in Europe, The Americas and in other parts
of the world. It will create new dimensions in mass transfer technology. The advantages of our process
engineering know-how and our technologies benefit even more the planning, modernization and
construction of our clients’ processes. And: saving energy and investment cost is part of it.
The new alliance offers a diverse array of products to meet the mass transfer needs of the industries. While
specializing in high performance products, the comprehensive products line of RASCHIG JAEGER also
includes traditional fractional trays as well as structured and random packing types that best fit the
application.
Leading In-house distributor test-facility
The company operates one of the largest in-house distributor test-facilities worldwide. Liquid distributors
can be tested up to 12m in diameter at a maximum liquid load of 2400m 3 per hour.
All products of RASCHIG JAEGER are the result of consistent development work long years of experience.
Comprehensive quality management in all stages of production and the principle of offering complete
solutions are the basis of our excellent reputation – worldwide.

Comparison of Various Packed Column Internals
Product Bulletin-400
Page 3
In the last few years our industry has consolidated through varies acquisitions and mergers. Because of
these business activities part numbers for varies items have become difficult to follow. In an effort help
everyone with this conversion the chart below is provided. The information for Raschig and Jaeger is very
accurate; however, because of some unique design characteristics some part numbers could be interpreted
using slightly different numbers.
The information provided for the other vendors is our best effort to convert there system to “fit” our
numbering system; again this information is subject to some interpretation due to constantly changing
designs.
At best this information should be used as a starting point or a guide. Do to the nature of the information
we cannot guarantee its accuracy.
Internals Raschig Jaeger Sulzer CT Old Norpro Koch-Glitsch-Norpro
Liquid Distributor /
Redistributor
DR 2 LD1, CR1 VSL, VSI, VSH 106, 845, 107 301A, 301B, 906
DR 3 LD5, CR5 798 301A, 301B, 905
DT 1 LD4 VEG, VKG 126, 1016 126, 320, 926
DT 1 (1) LD4 (1) VKR 136 136, 321, 986
DT 2 (2) LD4 (2) MTS, VEL, VEP 806 310, 302, 806, 985
DT 2 (1) LD4 (2) MTS, VEL, VEP 126, 1016, 127, 1017
RP 2 LD1, CR1 116, 816, 117, 817 301A & D, 916, 917
RP 2 (1) LD2, CR2 116, 1006, 117, 851, 1007 301B & D, 116, 117
DP 1 LD3, LD7 VRG 844, 141 304, 330, 342, 941
DP-S LD6 VRD 1044 344, 305, 1044, 943
DT-S LD4 (1) VEL, VEP 136, 137 312, 312S
DT-MF LD-MF VKRPW 996
Feed Pipe DP-P FP1 VR, LV 119, 129, 719, 729 340, 119, 719
Gas GV 1 GD3 GIO, GIG 196, 198 342, 746
Distributor GV 2 GDS Vane Type GIV 194 351, 768
GV 3 GD2 SK 896 716
Flash Device FB 1 FP1 (3) 655 300, 745
FB 2 855 705
FB 3 LRR, LRP 755 341, 755
FB 3/RP 2 898 300
Bed Limiter - Random HP 1 BL1 RPB 103, 823 401
- Random HP 2 BL1 402
- Structured HP-P BL2 HE, HS 133 403
Support Plate - Random SP 1 PS1 GIS 804, 819, 1019 101R, 804
- Random SP 2, SP 3 PS1 EMS 809, 818 101, 103, 814, 824
- Structured SP-P PS2 TEB, TSB 134 102, 802
SP-HG 104
SP 1/ RP 2 201A, 201B
Liquid CV 1 CT3, CRS SLR 633 510, 511
Collector CP 1 CT1 SK 733 501
CP 2 CT2 SK 833 501
Liq-Liq extraction DSP 1 834 600
(internals not in Raschig
HB)
(1) Drip tubes in troughs
(2) Notches with drip tubes
(3) Flash Device
DSP 2 835 600
DP-P 644, 744

Services
Raschig Jaeger specializes in the design and manufacture
of mass transfer equipment for the Chemical Process
Industries (CPI). Our primary tray products include
conventional sieve, valve, and bubble cap trays; packed
internals such as liquid distributors, chimney trays, packing
support plates, and holddowns; and multiple styles of random
and structural packing.
Raschig Jaeger also offers specialty trays such as high
capacity trays, high uplift strength trays, dual flow, disc & donut,
and side­to-side baffle trays.
Our products are backed by decades of experience and
employees committed to quality, excellence, and service.
Raschig Jaeger, a member of FRI (Fractionation Research
Institute) has a staff fully capable of providing complete
hydraulic and mechanical design of any new equipment
required to suit all your needs. Process designs are made
based on proven concepts. Our computerized mechanical
engineering and fabricated systems are integrated to permit
efficient and accurate processing of orders.
Raschig Jaeger focuses on effective design, responsive
service, and efficient manufacturing. Whether small diameter or
large, new construction, revamp or replacement, we will
provide reliable solutions to our customer’s requirements at an
economical price.
Product Bulletin-400
Page 4
To compliment Raschig Jaeger’s
product line of tray internals, we also
supply replacement parts and
installation hardware. Raschig Jaeger’s
hardware response group is dedicated
to our customer’s immediate and future
requirements for replacement hardware.
Our inventory is maintained and staffed
by experienced personnel dedicated to
quality, service and customer
satisfaction.

Quality Tray Products
Tray Selection
Product Bulletin-400
Page 5
Tray type selection is generally accomplished by balancing various process and mechanical
considerations. Major mechanical and process factors taken into consideration include capacity,
efficiency, turndown, pressure drop, susceptibility to corrosion and fouling, and actual experience in the
system.
What may be an overriding consideration in one case may be unimportant in another; therefore,
each situation must be examined on its own merits. With the exception of special licensed tray
technologies, Raschig Jaeger has the capability to produce virtually any type of conventional or specialty
tray type
Tray Type
Sieve
Moving Valve
High Capacity Valve
Fixed Valve
Bubble Cap
Dual Flow
Baffle
Disc & Donut
NYE
EC Technology
CoFlo
GENERAL TRAY CLASSIFICATION
Capacity
Medium
Medium
High
Medium
Low
High
High
High
High
Very High
Ultra High
Efficiency
Very High
Very High
Very High
Very High
Very High
Medium
Very Low
Very Low
High
Very High
High
Materials of Construction
Turndown
Medium
Very High
Very Low
Medium
Medium
Medium
Medium
Medium
Very Low
Very Low
Medium
Medium
Raschig Jaeger trays can be fabricated from numerous types of materials. In addition to working
with the most common carbon, ferritic, and austenitic steels, we also work with many exotic materials
such as Hastelloy® alloys, titanium and specialty duplex stainless steels. A brief listing of acceptable
materials of construction include:
Low
High
Medium
Pressure Drop
Low
Medium
Medium
Low
High
Low
High
carbon steel 321 stainless steel Inconel®
410S stainless steel 347 stainless steel nickel
304L stainless steel 904L stainless steel titanium
316L stainless steel Hastelloy® alloy 2205
317L stainless steel Monel® alloy 2
Fouling Resistance
Medium
Low
Low
High
Low
High
Very High
Very High
Medium
Low
Low

RJ-V1
1-Piece Moving Valve
RJ-A1
3-Piece High Turndown Caged Valve
RJ-A2
2-Piece Caged Valve
RJ-A3
2-Piece Caged Valve
RJ-MMV
High Capacity Mini Valve
RJ-SVG
Rectangular Fixed Valve
Valve Types
RJ-V4
RJ-V1 with Venturi Orifice
RJ-A4
RJ-A1 with Venturi Orifice
RJ-A5
RJ-A2 with Venturi Orifice
RJ-A6
RJ-A3 with Venturi Orifice
RJ-MV
High Capacity Fixed Mini Valve
RJ-V0
Round Fixed Valve
Valve Variations: leg length, anti-spin tabs, flush seating, alternate weights
Fixed Valve Variations: net rise (curtain area)
Product Bulletin-400
Page 6

Conventional Fractionation Trays
Valve Trays
Raschig Jaeger offers a vast array of conventional and High
Capacity moving and fixed valve types to meet all of our
customer’s needs. The single piece RJ-V1 is our standard
moving valve and is recommended for many applications. The
RJ-V1 incorporates tabs to raise the main body of the valve off of
the tray floor thereby reducing the chance of sticking. Raschig
Jaeger manufactures many types of 1 piece, 2 piece cage and
disc (RJ-A2 or RJ-A3), and 3 piece high turndown (RJ-A1) valve
units with thickness, material type, and leg lengths as needed to
meet any process and mechanical conditions required. Additional
variations include extruded tray floor openings to reduce
pressure drop and multiple valve weights to permit uniform
operation over a wider operating range. See section -- for a
complete listing and description of our most common styles
Sieve Trays
Product Bulletin-400
Page 7
Sieve trays began to dominate the CPI’s mass and heat
transfer applications in the 1950’s. Prior to that, bubble cap trays
were the industry’s workhorse. The sieve tray is a flat perforated
plate. If extreme turndown conditions are not required, sieve trays
will likely meet your process performance objective. Additionally,
sieve trays have better anti-fouling characteristics and lower
pressure drop when compared to standard moveable valve trays.
Raschig Jaeger has the capability to provide virtually any type of
sieve tray. Perforation sizes as small as 1/8” in diameter are
offered
Bubble Cap Trays
Raschig Jaeger designs and provides numerous variations
of bubble cap trays. Our most common designs include
conventional slotted caps and the standard FRI solid cap (no
slots). Standard cap sizes are 3”, 4”, and 6”. Of course, custom
designs are available as well. Typical manufacturing methods to
secure the riser and cap assembly to the tray floor include
extrusion and press fitting, seal welding, and pull-through bolting
connections.
Bubble cap trays usually have a lower capacity (10-20
percent) than properly designed valve or sieve trays; however, they
are capable of efficient performance over a wider operating range
due to their superior leak proof characteristics.
Although some bubble cap tray towers have been
retrofitted with the more modern three piece RJ-A1 valve unit,
bubble caps still enjoy wide-spread industrial application in
systems where low liquid rates and large variations in vapor
loadings are present

High Capacity Trays
NYE TRAYS®
Product Bulletin-400
Page 8
Raschig Jaeger recommends high capacity NYE TRAYS when conventional trays fall short. They
have been successfully used in hundreds of installations since the 1980’s and incorporate advanced
technology to increase the capacity of columns by 10 to 30% over conventional trays. NYE TRAYS
achieve these improvements by use of a special inlet area design that reduces tray pressure drop and
increases the available area for vapor/liquid contacting. NYE TRAYS are a good general purpose high
capacity tray as they are well suited for a wide variety of mass and heat transfer services. Most revamps
can be accomplished with little or no welding to the vessel. NYE TRAYS are also well adapted to upset
prone services where upgraded mechanical strength is required.
EC Technology
Trays equipped with EC (entrainment capture) Technology can achieve capacity increases up to
50% over conventional fractionation tray designs. The maximum benefit is realized for trays that are
limited by entrainment flooding mechanisms. However, downcomer limited systems can also be
debottlenecked because less area needs to be allocated for liquid/vapor contacting on the deck. EC
Technology can be integrated with any tray deck contacting device (valve, fixed valve, sieve, bubble
cap) and is compatible with any flow pass configuration. Trays with EC Technology have equal or better
separation efficiency compared to conventional trays due to enhanced vapor/liquid contacting within the
entrainment capture zone .
CoFlo Trays
The CoFlo TM Tray is a Ultra High Capacity gas-liquid contacting device. Performance tests
demonstrate 100+% capacity increases over conventional fractionation trays while maintaining excellent
contact efficiencies. Each tray consists of three components: a liquid disperser, the contacting zone, and
the liquid/vapor separator. High capacities are achieved due to cocurrent flow of liquid and vapor phases
through the contacting zone. CoFlo trays are ideally suited for debottlenecking where an existing tower
can be used in lieu of replacement with a larger diameter. Tray components are modular and self
supporting and in most cases can be fitted onto existing support rings and downcomer bars. Cartridge
construction is recommended for column diameters < 30in (762mm).

Specialty Trays
Dualflow Trays
Dualflow trays are sieve trays that do not have
downcomers. The entire active or bubbling area is
perforated with holes with typical hole sizes ranging
from 1/2” - 1” in diameter. Vapor and liquid countercurrently
flow through the perforations; hence, the
name Dualflow. Under normal operating conditions,
liquid splashes about on top of the tray in a wave-like
manner. Liquid flows downward momentarily through
perforations in the areas of wave crests whereas
vapor flows upward through perforations in the area
between crests.
High open area dualflow trays have a higher
capacity and lower pressure drop compared to
conventional fractionation trays at the same tray
spacing and are particularly well suited to systems
containing a moderate to high level of solids or where
polymerizable compounds are present. The main
disadvantage of dualflow trays is their narrow efficient
operating range. The majority of industrial applications
are more common in small to moderate tower
diameters. However, large diameter designs have also
been employed. Levelness is especially important with
dual-flow trays. Trays which are not level potentially
suffer from gross liquid and vapor flow partitioning
through the deck
Baffle and Disc & Donut Trays
Side-to-side baffle trays and disc & donut trays
are arranged in a tower in such a manner that the liquid
and vapor contacting is accomplished by vapor passing
through a curtain of liquid falling from one tray to the
next or through rivulets of liquid flowing through
perforations in the tray deck. Tray decks are flat or
slightly inclined plates that occupy 40-60 percent of the
tower area. Designs which incorporate perforated
decks are typically 40 percent open so that there is
sufficient overlap between adjacent rows of plates.
For a given tray spacing, both types of trays
have a higher capacity and lower pressure drop than
conventional sieve or valve trays or even dualflow
trays; however, their liquid/vapor contacting efficiency
is significantly lower. Baffle trays and disc & donut trays
are particularly well suited to heavy fouling systems
due to their extremely high open area. Typical
applications include heavy oil refining and
petrochemical heat transfer services having a high
solid and/or petroleum coke content. Raschig Jaeger
can provide any of these specialty trays with
mechanically robust features to improve resistance to
dislodging
Product Bulletin-400
Page 9

Special Design Features
Product Bulletin-400
Page 10
Raschig Jaeger offers a full complement of modern tray features to permit an optimized solution to
almost any tray design challenge. Process and/or mechanical considerations dictate when special features
are required. Our experienced process design team understands these requirements so that our
customer’s needs are realized
Downcomer Designs
In addition to the standard chordal / segmental design, Raschig Jaeger also offers multichordal,
circular, and envelope styles
Anti-Jump Baffles
Anti-jump baffles are used on 2, 3 and 4 pass trays. Their purpose is to prevent the liquid which is
flowing across the tray from jumping over the downcomer onto the opposing flow path. This condition
primarily occurs when the width of the center or off-center downcomer is small and the tray loading is high
Picket Fence Weirs
Picket-fence weirs are devices used to artificially increase the effective liquid height on the bubbling
area and reduce blowing. They are commonly used when the liquid flow over the weir < 1 gpm/in (8.94
m3/hr m). Alternately, the picket fence weir is used on multipass trays to achieve hydraulic balance
between the passes. The picket-fence weir is constructed of either a continuous metal plate having
rectangular notches or by attaching individual baffles to the weir at a uniform spacing
Recessed Inlet Pans
Recessed inlet pans are used in conjunction with sloped downcomers to reduce the head loss under
the downcomer. Sloped downcomers with recessed inlet pans are primarily used in heavy liquid loaded
services prone to downcomer backup flooding.
Swept-Back Weirs
Swept-back weirs are used on side downcomers to reduce the effective liquid height on the tray by
lowering the volumetric liquid flow rate per unit length of outlet weir. They can also be used in multipass
tray design to balance weir loads between the side and off-center or side and center downcomers of 3 and
4 pass trays, respectively.
Splash Baffles
Splash baffles are devices utilized in very low liquid rate services as either an alternative or
complement to picket-fence weirs. Splash baffles consist of a metal plate oriented vertically and parallel to
the overflow weir having a 1/2” - 1” setback away from the weir above the tray deck. The purpose of the
splash baffle is to maximize the liquid retention time on the tray

Valve Units
RJ-V1, 1716 Valve, 16 Ga.
RJ-V1, 1714 Valve, 14 Ga.
RJ-A1, Assembly 1116 Travel Stop, 16 Ga.
RJ-A1, Assembly 1114 Travel Stop, 14 Ga.
RJ-A1, Assembly 2116 Valve Plate, 16 Ga.
RJ-A1, Assembly 2114 Valve Plate, 14 Ga.
RJ-A1, Assembly 3220 Orifice Cover, 20 Ga.
RJ-A1, Assembly 3218 Orifice Cover, 18 Ga.
RJ-A2, Assembly 2216 Valve Plate, 16 Ga.
RJ-A2, Assembly 2214 Valve Plate, 14 Ga.
RJ-A2, Assembly 1216 Travel Stop, 16 Ga.
RJ-A2, Assembly 1214 Travel Stop, 14 Ga.
RJ-A3,
RJ-A3,
RJ-A4,
RJ-A4,
RJ-A5,
RJ-A5,
RJ-A6,
RJ-A6,
RJ-V4,
RJ-V4,
RJ-MMV,
RJ-MV,
RJ-SVG,
RJ-V0
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
For Valve Styles not listed, contact Jaeger Products for availability.
Product Bulletin-400
Page 11
The installation hardware, replacement valves, and conventional fractionation trays shown in this
brochure represent the typical tray design used in the industry. Other existing hardware styles may differ
in appearance from those depicted in the booklet; however the application is generally the same
DESCRIPTION STOCK MATERIAL
1A-1 Valve Assembly Travel Stop
Valve Plate
2V-1 Valve
1A-2 Valve Assembly
Travel Stop
Orifice Cover
Valve Plate

INSTALLATION HARDWARE
Hex Nut
Hex Bolt
DESCRIPTION
3/8" -16 UNC Thread
1/2" -13 UNC Thread
5/8" -11 UNC Thread
3/4" -10 UNC Thread
3/8"X 1" LG -16 UNC Thread
3/8"X 1-1/2" LG -16 UNC Thread
3/8"X 2" LG -16 UNC Thread
3/8"X 2-1/2" LG -16 UNC Thread
3/8"X 3" LG -16 UNC Thread
1/2"X 1" LG -13 UNC Thread
1/2"X 1-1/2" LG -13 UNC Thread
1/2"X 2" LG -13 UNC Thread
1/2"X 2-1/2" LG -13 UNC Thread
1/2"X 3" LG -13 UNC Thread
5/8"X 2" LG -11 UNC Thread
5/8"X 3" LG -11 UNC Thread
3/4"X 2" LG -10 UNC Thread
3/4"X 3" LG -10 UNC Thread
Product Bulletin-400
Page 12
STOCK MATERIAL
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
C. S., T410SS, T304L, T316L
Other specific material types of hardware available upon request

DESCRIPTION
3/8"X 2" LG -16 UNC Thread
3/8"X 2-1/2" LG -16 UNC Thread
3/8"X 3" LG -16 UNC Thread
3/8" ID , Split Lock Washer
1/2" ID , Split Lock Washer
14 Ga., 7/16" ID x 1" OD for 3/8" Bolts
12 Ga., 7/16" ID x 1" OD for 3/8" Bolts
12 Ga., 9/16" ID x 1-1/2" OD for 1/2" Bolts
12 Ga., 11/16" ID x 1-1/2" OD for 5/8" Bolts
14 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts
12 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts
12 Ga., 7/16" ID x 1-1/2" OD for 3/8" Bolts
12 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts
12 Ga., 7/16" ID x 2" OD for 3/8" Bolts
10 Ga., 7/16" ID x 1-1/2" OD for 3/8" Bolts
10 Ga., 7/16" ID x 1-3/4" OD for 3/8" Bolts
10 Ga., 7/16" ID x 2" OD for 3/8" Bolts
10 Ga., 9/16" ID x 1-3/4" OD for 1/2" Bolts
10 Ga., 9/16" ID x 2" OD for 1/2" Bolts
10 Ga., 11/16" ID x 2" OD for 5/8" Bolts
1/4 "T., 7/16" ID x 1-3/4" OD for 3/8" Bolts
1/4 "T., 9/16" ID x 2" OD for 1/2" Bolts
1/4 "T., 11/16" ID x 2" OD for 5/8" Bolts
STOCK MATERIAL
C. S. T410SS, T304L, T316L
C. S. T410SS, T304L, T316L
C. S. T410SS, T304L, T316L
C. S. T304, T316
C. S. T304, T316
T410, T304L, T316L
Carbon Steel
C. S., T410, T304L, T316L
C. S., T410, T304L, T316L
T410, T304L, T316L
Carbon Steel
Other specific material types of hardware available upon request
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
C. S. T410, T304L, T316L
Product Bulletin-400
Page 13
Dog Point Bolts
Split Lock Washers
Tray Washers
Domed Washers
Frictional Washers

DESCRIPTION
RJ-12 Seal Plate, 12 Ga. 3" Long
RJ-12A Seal Plate, 12 Ga. 3-1/2" Long
RJ-12B Seal Plate, 12 Ga. 4" Long
RJ-12C Seal Plate, 12 Ga. 4-1/2" Long
RJ-12D Seal Plate, 12 Ga. 5" Long
RJ-12X Seal Plate, 12 Ga. Variable Length
RJ-10 Seal Plate, 10 Ga. 3" Long
RJ-10A Seal Plate, 10 Ga. 3-1/2" Long
RJ-10B Seal Plate, 10 Ga. 4" Long
RJ-10C Seal Plate, 10 Ga. 4-1/2" Long
RJ-10D Seal Plate, 10 Ga. 5" Long
RJ-10X Seal Plate, 10 Ga. Variable Length
RJ-10 Angle Hanger, 10 Ga. 5" Long
RJ-20 Angle Hanger, 10 Ga. 6" Long
RJ-30 Angle Hanger, 10 Ga. Length Variable
RJ-8 Clip Angle, 14 Ga.
RJ-9 Clip Angle, 12 Ga.
RJ-10 Clip Angle, 10 Ga.
RJ-45 Lock Clamp 12 Ga., for 3/8”
Shaved Stud
RJ-45A Lock Clamp 10 Ga., for 3/8“
Shaved Stud
RJ-40A Lock Clamp 3/16" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40B Lock Clamp 1/4" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40C Lock Clamp 5/16" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40D Lock Clamp 3/8" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40E Lock Clamp 1/2" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40F Lock Clamp 5/8" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40G Lock Clamp 3/4" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40H Lock Clamp 7/8" Lip 12 Ga.,
for 3/8" Shaved Stud
RJ-40X Lock Clamp 1" Lip 12 Ga.,
for 3/8" Shaved Stud
STOCK MATERIAL
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
Product Bulletin-400
Page 14
Seal Plates
Angle Hangers
Clip Angles
Manway Lock Clamps
Manway Lock Clamps

DESCRIPTION
RJ-3 Lock Clamp 3/16" T.,
for 3/8" Shaved Stud
RJ-3A Lock Clamp Stud 1/4” T.,
for 3/8" Shaved Stud
RJ-2 Lock Clamp 3/16" T.,
for 3/8" Shaved Stud
RJ-2A Lock Clamp 1/4” T.,
for 3/8" Shaved Stud
RJ-5 Manway Stud 3/8"- 16 UNC x 2" LG
Shaved Stud
RJ-7 Manway Stud 3/8"- 16 UNC x 2-1/2" LG
Shaved Stud
RJ-8 Manway Stud 1/2"- 13 UNC x 2-1/2" LG
Shaved Stud
RJ-9 Manway Stud 1/2"- 13 UNC x 3" LG
Shaved Stud
LJ-50 Bottom Clamp 12 Ga., for 3/8" Bolt
LJ-50A Bottom Clamp 10 Ga., for 3/8" Bolt
RJ-51 Bottom Clamp 12 Ga.,
with 3/8"-16UNC Nut
RJ-51A Bottom Clamp 10 Ga.,
with 3/8"-16UNC Nut
Nut welded in place on top side of clamp
STOCK MATERIAL
C. S T410, T304L, T316L
C.S.
C. S T410, T304L, T316L
C.S.
Other specific material types of hardware available upon request
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
Product Bulletin-400
Page 15
Manway Lock Clamps
Manway Lock Clamps
Manway Studs
Bottom Tray Clamps
Bottom Tray Clamps

DESCRIPTION
RJ-52 Bottom Clamp 12 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-52A Bottom Clamp 10 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-52S Bottom Clamp 12 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-52SX Bottom Clamp 10 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-52Z Bottom Clamp 12 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-52ZX Bottom Clamp 10 Ga.,
w / 3/8" x 3" -16 UNC Bolt
RJ-20A-H Bottom Clamp 12 Ga.,
3/16" to 7/8" Lip
RJ-20J-P Bottom Clamp 12 Ga.,
1" to 1-3/4" Lip
RJ-22A-H Bottom Clamp 12 Ga.,
3/16" to 7/8" Lip
With 3/8"-16 UNC welded nut
RJ-22J-P Bottom Clamp 12 Ga.,
1" to 1-3/4" Lip
With 3/8"-16 UNC welded nut
RJ-23A-H Bottom Clamp 12 Ga.,
3/16" to 7/8" Lip
With 3/8"x 1-1/2" thru 2"-16 UNC welded bolt
RJ-23J-P Bottom Clamp 12 Ga.,
1" to 1-3/4" Lip
With 3/8"x 1-1/2" thru 3"-16 UNC welded bolt
RJ-H1, 3/8"-16UNC x 9.347" Lg.
RJ-H2, 3/8"-16UNC x 6.750" Lg.
Other specific material types of hardware available upon request
STOCK MATERIAL
T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
C. S T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
T410, T304L, T316L
C. S., T304, T316
C. S., T304, T316
Product Bulletin-400
Page 16
Bottom Tray Clamp
Bottom Tray Clamp
Bottom Tray Clamp
Hook Bolts

DESCRIPTION
RJ-GW1, 1/16" x 3/8" ID. x 1" OD
RJ-GW2, 1/16" x 3/8" ID. x 1-1/2" OD
RJ-GW3, 1/16" x 3/8" ID. x 1-3/4" OD
RJ-GW4, 1/16" x 3/8" ID. x 2" OD
RJ-GW5, 1/16" x 3/8" ID. x 2-1/2" OD
RJ-GW6, 1/8" x 3/8" ID. x 1" OD
RJ-GW7, 1/8" x 3/8" ID. x 1-1/2" OD
RJ-GW8, 1/8" x 3/8" ID. x 1-3/4" OD
RJ-GW9, 1/8" x 3/8" ID. x 2" OD
RJ-GW10, 1/8" x 3/8" ID. x 2-1/2" OD
RJ-TG1, 1/16" x 1" wide (NDW)
RJ-TG2, 1/16" x 1-1/4" wide
RJ-TG3, 1/16" x 1-1/2" wide
RJ-TG4, 1/16" x 2" wide
RJ-TG5, 1/16" x 2-1/2" wide
RJ-TG6, 1/16" x 3" wide
RJ-TG7, 1/8" x 1" wide (NDW)
RJ-TG8, 1/8" x 1-1/4" wide
RJ-TG9, 1/8" x 1-1/2" wide
RJ-TG10, 1/8" x 2" wide
RJ-TG11, 1/8" x 2-1/2" wide
RJ-TG12, 1/8" x 3" wide
All sizes available in either Drop Warp or Non-Drop Warp:
Exception is 1” Wide, available in Non-Drop Warp only.
STOCK MATERIAL
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
D-8080, Teflon, Neoprene
TN9000, Greenguard
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Fiberglass, Teflon, Neoprene
Ceramic Fiber
Product Bulletin-400
Page 17
Washer Gaskets
Tape Gaskets

DESCRIPTION
RJ-RSG1, 1/8" x 1/8" Square
RJ-RSG2, 1/4" x 1/4" Square
RJ-RSG3, 3/8" x 3/8" Square
RJ-RSG4, 1/2" x 1/2" Square
RJ-RSG5, 5/8" x 5/8" Square
RJ-RSG6, 3/4" x 3/4" Square
RJ-RSG7, 1" x 1“ Square
RJ-RSG8, 1-1/8" x 1-1/8" Square
RJ-RSG9, 1-1/4" x 1-1/4" Square
RJ-RSG10, 1-1/2" x 1-1/2" Square
RJ-RRG1, 1/8" Round
RJ-RRG2, 1/4" Round
RJ-RRG3, 3/8" Round
RJ-RRG4, 1/2" Round
RJ-RRG5, 5/8" Round
RJ-RRG6, 3/4" Round
RJ-RRG7, 1" Round
RJ-RRG8, 1-1/8" Round
RJ-RRG9, 1-1/4" Round
RJ-RRG10, 1-1/2" Round
STOCK MATERIAL
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Fiberglass, Teflon, Neoprene
Ceramic Fiber, Gortex
Other specific material types of hardware available upon request
Product Bulletin-400
Page 18
Rope Gaskets

100 General Product Information
200 Metal Random - RSR
300 Mist Eliminators – Wire Mesh
400 Fractionation Trays and Hardware
450 High Capacity – Nye Trays
475 High Capacity – CoFlo Trays
500 Metal Structured Packing – RSR
525 Metal Structured Packing - MaxPak
550 Plastic Structured Packing – RSP
Locations / Production Sites
Ludwigshafen and Espenhain,
Germany
Houston, Texas
El Dorado, Kansas
And Monterrey, Mexico.
Furthermore we co-operate with reliable partners all over the world
RASCHIG JAEGER TECHNOLOGIES
Mundenheimer Strasse 100
67061 Ludwigshafen - Germany
Phone: +49.62.5618-602 ∙ Fax: +49.621.5618-604
email: hneis@raschig.de www.raschig.com
600 Plastic Random – Jaeger Tri-Pack/Hackentten
625 Plastic Random – RSR
650 Plastic Random – LPR
675 Plastic Random – Nor Pak
700 Plastic Random – Rings and Saddles
800 Ceramic Random Packing
900 Winsorp Software
1000 Process Information
1100 Column Internals
1200 Reactor Internals
Jaeger Products, Inc.
1611 Peachleaf Street
Houston, TX 77039
Phone: 281.449.9500 ∙ Fax: 281.449.9400
800.678.0345 www.jaeger.com