Jäspi ThermoStore - Kaukora

Jaspi ThermoStoreWith over 30 years experience in manufacturing anddevelopment of high-quality and innovative heating products,Jaspi ThermoStores are leaders in their class. Modernproduction facilities, high-end design technologies and highquality materials give our products unrivalled reliability andenergy efficiency.Jaspi ThermoStore systems are designed to improveefficiency of any heating system by connecting all theavailable energy sources into a single unit. This also providesthe ultimate flexibility for the future as any heat source canbe removed or added at any pointJaspi ThermoStore are 'hybrid' units and can have up to 4indirect heating coils for four separate heat sources &domestic hot water. No separate immersion tank is needed.Depending on the dwelling size, heat demand and connectedheat sources, there are five models available; 500, 700, 1500,2000 & 3000 litres.All ThermoStore units can be fitted with a Stainless Steeldomestic Hot Water coil, which is highly efficient, lightweightand can be used in all water conditions also with hard waterthat has high levels of dissolved minerals, particularlycalcium.This guarantees a very long service life with no loss ofefficiency. Indirect coils and immersion heaters can also beadded at a later stage if new heat sources are connectedor new technologies become available.Jaspi ThermoStore systems have multiple flow / return andthermostat connection points for easy installation andflexibility.

Jaspi ThermoStore 500 & 700500 & 700 litre Jaspi-ThermoStore units are designed to work with traditional or underfloor central heating systemsand all heat sources. They are designed to minimize the installation floor space and can fit through most of the standarddoors. High-efficiency Stainless Steel domestic hot water coil provides ample, mains pressure hot water.500 & 700 litre ThermoStore tanks can be fitted with two back-up immersion heaters, one for daytime top-up use andanother for night-time cheaper tariff heat charging. Immersion heaters come in 3 kW, 4,5 kW & 6 kW variations.Jaspi-ThermoStore is essential for any heating system that uses two or more heat sources and will supply thedomestic hot water & radiator / underfloor heat from a single unit.ThermoStore 500 ThermoStore 500 & 700OptionalOptionalDescription1. Domestic Indirect Hot Water Coil Ø222. Domestic Indirect Hot Water Pre-heating Coil Ø22 (optional)3. Immersion heater (optional) 2”4. Sensor / Thermostat 3/4”5. Solar heating coupling 1” for models with indirect solar coil6. Heating circuit return & system drain 1”7. Heating circuit flow & expansion vessel connection 1”- High-density urethane insulation 65 mm- Highest permitted store temperature 110 °C- Indirect Solar heating coil (optional)ModelThermoStore500500-k700-kCapacity(l)500500700Weight(kg)130170200Pressure(bar)1,5/4,01,5/4,01,5/4,0Dimensions (mm)A B C1880 790 1001880 790 1002030 870 100Specifications are subject to change without notice for future improvement.

Jaspi ThermoStore 1500, 2000 & 30001500, 2000 & 3000 litre Jaspi-ThermoStore systems can be used for larger houses, multiple heat circuits (for example separateflats or office units) and Industrial installations. They are shaped for optimum heat distribution throughout the tank and willprovide market leading expandibility for multiple heat sources, system monitoring and thermal efficiency. These ThermoStoretanks can be fitted with up to four back-up immersion heaters for daytime top-up use or cheaper rate night-time heatcharging. They are also fitted with a new high-efficiency Stainless Steel indirect hot water coil. Any heat source can be fittedto the system either directly or by the means of up to four indirect coils. This way the ThermoStore can always be chargedwith the heat source which is the cheapest / available at any point (e.g. Solar, Wind or Heat Pump).OptionalOptionalDescription1. Domestic Indirect Hot Water Coil Ø222. Domestic Indirect Hot Water Pre-heating Coil Ø22 (optional)3. Immersion heater (optional) 2”4. Sensor / Thermostat 3/4”5. Solar heating coupling 1” for models with indirect solar coil6. System Drainage 1”7. Expansion vessel connection 1”8. Heating circuit return 1 1/4”9. Heating circuit flow 1 1/4”- High-density urethane insulation 100 mm- Highest permitted store temperature 110 °C- Indirect Solar heating coil (optional)ModelThermoStore1500-k2000-k3000-kCapacity(l)150020003000Weight(kg)350400500Pressure(bar)1,5/4,01,5/4,01,5/4,0Dimensions (mm)A B C2160 1260 1302180 1410 1202310 1610 130Specifications are subject to change without notice for future improvement.

Jaspi Hybrid 500-160 & 700-200Jaspi Hybrid thermal storage tanks are designed tobe used with low temperature heat sources such asheat pumps, solar heating and wind power. Theircompact size makes them suitable for heating systemrefurbishments as well as for new dwellings. The stylishsilver Hybrid tanks come in two sizes, 500 and 700litres including the internal Stainless steel hot watertanks of 160 and 200 litres respectively.Unique, internal hot water tank with fast heat recoveryrate, will supply ample hot water from your renewableenergy source.Inside the Hybrid thermal tank, instead of a coil, is ahigh grade Stainless Steel 160 or 200 litre domestichot water cylinder. This cylinder is fully immersed ina larger volume of water held in the tank. This ensuresfast recovery of domestic hot water without the need forextra high temperatures commonly used with traditionalboilers. Savings in energy consumption are easy to see.To guarantee the supply of hot water in all circumstances,we recommend that the system is fitted with back-upheating. This can be for example a J-Immersion heater(3, 4.5 or 6 kW), oil boiler or a wood / coal burner. Multipleconnections for different heat sources makes Hybridfuture proof when new energy sources are available.Jaspi Hybrid tanks have a flange for solar coil as standardmaking it simple to fit a solar coil even at a later stage.Our Hybrid technology is used by many heat pumpmanufacturers and now it is also available for domesticusers with traditional heating.Description1. Internal Hot water cylinder (Stainless Steel)2. Reservation for Solar coil (optional)3. Reservation for Immersion heater 2"4. Heat pump flow 3/4"5. When connected to central heating,CH return 3/4"6. Thermometer / Sensor 1/2"7. Sensor 3/4"8. Sensor 1/2"9. Drain 1"10. When connected to central heating,CH flow & expansion 1"11. Domestic cold water in D1812. Domestic hot water out D1813. Heat pump return 3/4"AccessoriesJ-Immersion heaters 3 & 4.5kWSolar coil (copper)1,5 bar Pressure relief valves2" Plug22mm to D18 compression reducerModel Storage Hot Water Weight Pressure Dimension mmJaspi Hybrid litres litres Kg bar A B C500-160 340 160 180 1,5 1880 790 100700-200 500 200 200 1,5 2030 870 100Specifications are subject to change without notice for future improvement.Jaspi Hybrid thermal storage tank - Air-to-water heat pump -Solar energy systemSystem connection example. Do not use as a detailed installation drawing.

Extra equipmentStainless Steel Hot water coilOptional Stainless steel hot water coil can be fitted to all JaspiThermoStore systems. If the instant hot water demand is veryhigh, we recommend that a second, pre-heating coil is fittedto the lower part of the ThermoStore. It is also needed if thesystem is fitted with a Solar coil.Jaspi Immersion heatersPerfect fit for all ThermoStore systems. They will provide backupand boost in the event of a boiler failure, or when otherheat sources are not available. All three versions; 3, 4.5 & 6 kWhave a built-in thermostat, safety cut-off, indicator light andare made of high grade Stainless Steel.Solar heating packageThis Solar heating package can be connected toany Jaspi ThermoStore system. Full system includes5 hot water Solar panels, pump station, solar controller,40 L of transfer fluid, roof fixings and expansionvessel.Jaspi ThermoStore provides ultimate flexibility for your heatingBy combining two or more heat sources together you can save up to 75% in heating costs compared to the traditionalheating systems. When the heat is available (e.g. Solar) or convenient to use (e.g. Wood boiler), it is stored severaldays in ThermoStore and can then be used when needed.Heat Pump & Electric heatingSolid wood / Pellet / Woodchip & combination BoilersSolar Heating & Oil / Electricity / Heat Pump

JASPI KNOWS HEATINGLeading the wayKaukora Oy, the manufacturer of JASPI & JAMA wasestablished in Southern Finland in 1976 to satisfy the rapidlyincreasing demand for energy efficient heating products dueto the first oil crisis in the early 70's.Since then, the product range has grown to include ThermalStorage systems, Water heaters, Wood, pellet and multifuelboilers, Centralised / District heating systems, Electric boilers,Solar heating & Heat pumps.Our products are widely exported with hundreds of thousandsof working systems around the world, including Europe, Japanand the United States.Our production facilities are modern, clean and designed tominimise the environmental impact of the large scale industrialproduction. We utilise solar & wind power in our factories.All the work is carried out under the strict product qualityand environmental standards of ISO 9001 & ISO 14001.Over 30 years, our in-house product development and testingfacilities have produced innovative, long lasting and futureproof heating products which have been proven time aftertime.Every Jaspi product is a soundinvestment for the greener future.Manufacturer:HEATINGKaukora OyP.O. Box 21, 21201 Raisio, FinlandTel. +358 2 4374600, Fax +358 2 4374650www.kaukora.fi • kaukora@kaukora.fiUK Distributors:JASPI UK Limited6 Beare Trading Estatenr. BroadclystExeter EX5 3JX Devonwww.jaspi.co.ukinfo@jaspi.co.ukwww.woodviking.cominfo@woodviking.comISO 14001ISO 9001EN 729-22/2009