Actsip-H - Esco-da.be

Actron AB Main Menu 977.9.5.2. Page length"Setup-PC-Page length"The number of lines on a page. The default is standing paper of 72 lines. Please notethat Actsip-H depends on the printer to be able to do a form feed correctly.If the form feed on your printer fail to produce correct new pages, please refer to"Setup-Printout-Printer has formfeed" for an alternative way of doing form feeds.7.9.5.3. Page width (uncompressed)"Setup-PC-Page width (uncompressed)"The number of characters that will fit onto one line when printing in normal mode. Thedefault is "80" for standing A4. The number of characters used should be when theprinter is in normal mode NOT compressed or condensed mode.7.9.5.4. Page width (compressed)"Setup-PC-Page width (compressed)"The number of characters that will fit onto one line when printing in compressed mode.The default is "132" for standing A4. The number of characters used should be whenthe printer is in compressed or condensed mode NOT normal mode.7.9.5.5. Compressed printout"Setup-PC-Compressed printout"By setting this to "YES", Actsip-H will be able to print wider listings. The combinedlisting of ladder and instructions require this option to be "YES" if you use standing A4paper. If you try to print a combined ladder and instruction list and has set this to"NO"; Actsip will report an error if the paper isn't wide enough.7.9.5.6. Block comment printout"Setup-PC-Block comment printout"This parameter controls if the block comments associated with a block will be printedor not. This should be set to "YES" for the normal printout.7.9.5.7. Line drawing set"Setup-PC-Line drawing set"If your printer is not able to reproduce the line drawing characters correctly or if youwant to shorten the printout time, set this option to "NO". Setting this option to "YES"before printing the final documentation is recommended.See page 103 for more printer information.Copyright Actron AB, 1992