Actsip-H - Esco-da.be

82 Main Menu Actron AB7.8.4.2. CPU statusThe second page of the PLC status looks like this:╔══════════════════════════ CPU status (2/4) ══════════════════════════╗║ WRF013 CPU operation status RW L U M P ║║ Battery : Ok WRF040-2 Occupation 1: R FF FF 00 01 ║║ Debug : No WRF043-5 Occupation 2: - ║║ Force : No WRF046-8 Occupation 3: - ║║ Error : No WRF049-B Occupation 4: - ║║ Simulation: No WRF04C-E Debug info : - ║║ Halt : No ║║ Operation : STOP 012345678 ║║ R7E8 Occupation: Yes WRF018 FUNC bus setup: 000010000 ║║ R7E9 RUN enable: Yes║║ R7EA Mod in RUN: No WRF010 Max scan : 10 ms ║║ WRF011 Current scan : 00 ms ║║ WRF012 Min scan : 00 ms ║║ WRF014 WR area size : 0400║║║║ R7E0-2 Key position : REMOTE║║║║║║ , for new screen, to return, 0 to clear CPU status ║╚═════════════════════════════════════════════════════════════════════════╝WRF013 to R7EA shows status (many of which are displayed on the CPU front).WRF014 shows the available WR area, (depends on RAM size).WR7E0-2 shows the front key position.WRF040 to WRF04E shows how many modules/peripheral units that is currentlyconnected to the PLC, which one (if several) that has write permission andwhat its "calling address" is. There can be maximum 4 units. Only one can bedebugging.WRF018 shows the status recieved from the special function modules. If a module ispresent, it must have a "1".WRF010 to WRF012 shows the scan times for the project in the PLC.7.8.4.3. REMOTE statusThe third page of the PLC status looks like this:Copyright Actron AB, 1992