Actsip-H - Esco-da.be

80 Main Menu Actron AB7.8.3.4. Force clear"Communication-Monitor IO-Force clear"It is used to release all force specified addresses.7.8.3.5. Forced output"Communication-Monitor IO-Forced output"With "Forced output" you can force the output addresses when the PLC is in STOPmode. It can be used to test connections and cables.Enter the address to force and then the value. exits "Forced output (Y, WY)" and returns to "I/O monitor".7.8.3.6. I/O reset"Communication-Monitor IO-I/O reset"Clears all external outputs.7.8.4. PLC status"Communication-PLC status"This command contains four status pages that reflect information from the PLC. Witheach information, the address that holds the info and a text that labels that address islisted. If explanations are required, please refer to Hitachi's Technical manuals.7.8.4.1. ERROR status"Communication-ERROR status"┌────────── Forced output (Y,WY) ────────┐│WY20 65535 │││└────────────────────────────────────────┘The first page of the PLC status looks like this:Copyright Actron AB, 1992