Actsip-H - Esco-da.be

Actron AB Main Menu 79To add a new entry press and choose the short comment or address to monitor.If the address is a word or a double word you must choose a radix to display the valuein. You can display the value in either Hexadecimal, Decimal or Signed decimal mode(H/D/S).To return to "I/O monitor" press .7.8.3.3. Force I/O Set/Reset┌───────── Edit I/O monitor list ────────┐│ WM001 H ││ WM002 D ││ WM003 S ││ TC1 H ││ CL1││ TD4││ X00000││ X00001││ X00002││ M0000││││││││││││────────────────────────────────────────│││└────────────────────────────────────────┘"Communication-Monitor IO-Force I/O Set/Reset"It is possible to force specify values into user defined addresses during run with "ForceI/O Set/reset". and searches for the next or the previous force specifiedaddress.┌────────── Force I/O Set/Reset ─────────┐│M0 1 │││└────────────────────────────────────────┘To enter a new force specification (=value) enter the new value and press . Torelease the force specification for an address press .To add another address to force specify press . To return to "I/O monitor"press .NOTE 1NOTE 2The smaller types of the H type CPU doesn't support force specifiedvalues.A force specified value is not the same as a value changed in"Communication-IO monitor" see page 77 for more info.Copyright Actron AB, 1992