Actsip-H - Esco-da.be

Actron AB Main Menu 737.7.5. Store a macro in a fileThis command is used to save a number of circuits in a PLC program as a macro file.The instructions is saved with both numerical addresses and short and long comments.The block comments is also saved along with the macro. The "Files-Insert macro"command is used to fetch an existing macro and insert it among the current PLCinstructions.When a macro is saved you only have to give the first and last instruction to saved andthe filename to be used. The file is automatically given a file extension of ".HMA".NOTE!Timer WDT (Watchdog) can not be used in a macro.╔═════════════════════════ Macro save ═══════════════════════╗║File name : TIME║║From circuit : 3║║To circuit : 3 ║║║║Macro saved ok, Press ║╚════════════════════════════════════════════════════════════╝7.7.6. Delete file."Files-Delete file"This option is used to remove a project (or any DOS file) from the disk.If you want to remove an Actsip-H project you MUST include the extensions ".HPG",".HPC" and ".HBC" in the filenames (You must delete three files). This as a safeguardagainst accidental removal of projects.To delete a project you must delete the following files:╔════════════════════ Remove file ═══════════════════╗║File name : OLDPROJ.HPG║║║║║╚════════════════════════════════════════════════════╝and╔════════════════════ Remove file ═══════════════════╗║File name : OLDPROJ.HSC║║║║║╚════════════════════════════════════════════════════╝and finallyCopyright Actron AB, 1992