Actsip-H - Esco-da.be

Actron AB Main Menu 717.7.2. Load a project from file"Files-Load a project from file"To load an existing project from a file on a floppy or hard disk select this option andchange the default name PROJECT to the name of your project. Use a maximum of 8characters and don't use any of the characters on the next line:" * + , . / : ; < = > ? [ \ ] |or the character. You may of course use the ":" to specify another drive as in"B:NEWPROJ" or a path as in "\USER\PROJ1\XPROJ" or both as in"D:\NEWBIB\NEW2". Do not enter an extension or use the "." as Actsip-H loadsseveral files with different extensions ( ".HPG", ".HSC" and ".HBC") for each project.A series of numbers are printed on the screen during the loading process.Nothing of the previous project will remain after the load so make sure that you havesaved the project before starting loading a project.╔═══════════════════════════ Program Loading ══════════════════════════╗║File name:MYPROJ║║║║║║║╚══════════════════════════════════════════════════════════════════════╝If the project was loaded correctly a small window pops up and then disappears whenthe project is loaded (The number shown is irrelevant).╔════════════════════════ Working ═══════════════════════╗║║║ Loading project: 4║║║╚════════════════════════════════════════════════════════╝7.7.3. Store a project in a file"Files-Store a project in a file"To save the project in a file on a floppy or hard disk, select this option and change thedefault name PROJECT to the name of your project. Use a maximum of 8 charactersand don't use any of the characters on the next line:" * + , . / : ; < = > ? [ \ ] |or the character. You may of course use the ':' to specify another drive as in"B:NEWPROJ" or a path as in "\USER\PROJ1\XPROJ" or both as in"D:\NEWBIB\NEW2". Do not enter an extension or use the "." as Actsip-H savesseveral files with different extensions (".HPG", ".HSC" and ".HBC") for each project.Copyright Actron AB, 1992