Actsip-H - Esco-da.be

Actron AB Main Menu 497.3. System menu.The "System" menu looks like this:╔═══════════════════════════════════════════════════════════════════╗║ System Program Allocation Printout Files Communication Setup ║║ ┌──────────────────┐║║ │Dos command │ ║║ │Exit from Actsip-H│║║ │About Actsip-H │ ║║ └──────────────────┘║║║7.3.1. DOS command."System-DOS command"If you have enough memory in your computer (640Kb) you can use the "System-DOScommand" to temporarily leave the Actsip-H system and do things like formattingdisks, etc. When you are finished with DOS write "Exit " at the DOS promptand you are back again in the project.You are encouraged to save the project before using this option. If the system shouldcrash due to a not so well behaved application or be turned off during the DOScommand, all the changes to the PLC project will be lost!See also page 102 for more information about DOS and DOS commands.7.3.2. Exit from Actsip."System-Exit from Actsip"Use this command to leave the Actsip system. Save the project before leaving Actsip-H. If you haven't saved your (modified) project you will get a last chance to save it.This is the normal way to leave Actsip-H, you may also use + to exit fromActsip-H any time. (Use + to end Actsip-H without a chance to save theproject.)See page 71 for information on how to save projects.Copyright Actron AB, 1992