Actsip-H - Esco-da.be

Actron AB Getting started 134.6. Other useful documentation.Even though we tried to make this manual cover as many parts of the process involvedin the creation of PLC project, not every detail could be included.For information on the different H PLC types refer to the technical and programmingmanuals. (E.g. the series H programming manual and technical manual, describes theprogramming language of the series H PLC's and the physical and electricalcharacteristics of the PLC.)The User and DOS manuals for the computer on which you are going to use theActsip-H system could also be useful, these books contains all the relevant informationon how to run your computer.To get started quickly in the world of the PC and DOS, we would recommend astarting book on how to use PC and DOS computers. Your local bookstore should beable to provide you with a wide selection of titles.4.7. A quick tour through Actsip-HYou will now be given a tour through most part of the software package called Actsip-H.You should then continue with the following section:Ladder programming starts on page 17.After studying one of these sections you should have become familiar with the way touse Actsip-H and the general layout of the menus, you will then when you look on adifferent part of Actsip quicker get the essentials from that section.Starting on page 14 are general topics regarding the whole Actsip package and couldbe referred to as needed.The main menu of Actsip is described starting on page 46.The index can be found on page 121.Copyright Actron AB, 1992