Users Guide - Facultad de Ciencias

18 Getting Started1.4 Startup TOPSPININDEXUnder Windows! Click the TOPSPIN icon on the DONE desktop INDEXor! Start TOPSPIN from a Command Prompt as follows:1. Click Start " Run, enter cmd and click OK2. In the Command Prompt:a) Enter cd b) Enter topspinwhere is the directory where TOPSPIN is installed.Under Linux1. Open a Linux Shell or Terminal Window2. In the Shell/Terminal:a) Enter cd b) Enter ./topspinwhere is the directory where TOPSPIN is installed.1.5 ConfigurationAfter the installation of TOPSPIN, it must be configured once. TOPSPIN may be usedin two different ways:on a computer which controls a spectrometerThe command cf must be executed once, to configure the spectrometer hardware.Just type this command and follow the instructions on the screen. At theend of the dialog, further configuration commands, like expinstall, are offeredand can be started from there.on a computer which is used as datastationThe only configuration command to be executed is expinstall. This allows