A9900329 Rocket 3 Touring Aux & Fog Lamp Kit EN - Pro Italia Online

WarningAlways have Triumph approved parts, accessories and conversions fitted by a trained technician of an authorisedTriumph dealer. The fitment of parts, accessories and conversions by a technician who is not of an authorised Triumphdealer may affect the handling, stability or other aspects of the motorcycles operation which may result in loss ofmotorcycle control and an accident.WarningThroughout this operation, ensure that the motorcycle is stabilised and adequately supported to prevent risk of injuryfrom the motorcycle falling.WarningA torque wrench of known accurate calibration must be used when fitting this accessory kit. Failure to tighten any of thefasteners to the correct torque specification may result in loss of motorcycle control and an accident.1. Remove the seat as described in the service manual.2. Disconnect the battery, negative (black) lead first.3. Remove the windshield as described in the servicemanual.4. Remove the airbox cover. Remove the fuel tank frontfixings. Raise the front of the fuel tank and support inthe raised position with the prop stand as describedin the service manual.Note:• If an accessory alarm is fitted it will benecessary to remove the additional securitylocknut fitted to the right hand headstockcover top fixing. Retain the locknut for reuse.5. Remove the right hand headstock cover as describedin the service manual.6. Remove the headlamp bezel fixings. Retain thefixings for reuse.7. Remove the headlamp lens assembly from theheadlamp bowl and disconnect the headlamp andposition lamp connections.1. Headlamp lens2. Headlamp bowl3. Headlamp connection4. Position lamp connection1. Headlamp bezel2. Fixing2 of 10