Basic information on the SURGICAL PROCEDURE - Straumann

Insertion Standard implant Ø 4.8 mm RN, Standard Plus implant Ø 4.8 mm RN and Standard implant Ø 4.8 mm WN
10.a
after tapping the thread (tap
Ø 4.8 mm), the implant bed
is prepared for one of the
following implants:
p standard implant:
s Ø 4.8 mm rn or
s Ø 4.8 mm Wn
p standard Plus implant:
sP Ø 4.8 mm rn
Insertion Standard Plus implant Ø 4.8 mm WN
10.B
if a standard Plus implant
(sP Ø 4.8 mm Wn) is to be
inserted, the coronal part of the
implant bed is shaped with the
profile drill Ø 4.2 mm before
the thread is tapped and
only then is the implant inserted.
see also DvD “straumann ® Dental implant system-surgery“,
art. no. 150.541, “implantation of a standard Plus implant“.
Tap Ø 4.8 mm
Standard implant Ø 4.8 mm RN
Standard Plus implant Ø 4.8 mm RN
Standard implant Ø 4.8 mm WN
Profile drill Ø 4.2 mm
Tap Ø 4.8 mm
Standard Plus implant Ø 4.8 mm WN