Basic information on the SURGICAL PROCEDURE - Straumann

Insertion Standard implant Ø 4.1 mm RN
8.a
after tapping the thread (tap
Ø 4.1 mm), the implant bed is
prepared to accept a standard
implant (s Ø 4.1 mm rn).
Insertion Standard Plus implant Ø 4.1 mm RN
8.B
9.
10.
if a standard Plus implant
(sP Ø 4.1 mm rn) is to be
inserted, the coronal part of the
implant bed is shaped with the
profile drill Ø 3.5 mm before
the thread is tapped and
only then is the implant inserted.
if an implant of greater diameter
is to be inserted, preparation is
continued with the twist drill Pro
Ø 4.2 mm.
the depth of drilling is checked
with the depth gauge Ø 4.2 mm.
9. 10.
Tap Ø 4.1
Standard implant Ø 4.1 mm RN
Profile drill Ø 3.5 mm
Tap Ø 4.1 mm
Standard Plus implant Ø 4.1 mm RN
9. Twist drill PRO Ø 4.2 mm
10. Depth gauge Ø 4.2 mm