Basic information on the SURGICAL PROCEDURE - Straumann

More documents

Recommendations

Info

1 Note on implant position planning Mesio-distal implant position the implant diameter, implant type, position and number of implants should be selected individually taking the anatomy and spatial circumstances into account. the dimensions given here should be regarded as minimum guidelines. only when the minimum distances (see illustration) are observed is it possible to design the restoration so that the necessary oral hygiene measures can be carried out in the region of the implant neck. 1 2 at least 1 mm 3 Distance to adjacent tooth at bone level 0.5 mm Width of gap 0.5 mm Distance to adjacent tooth at bone level 1.5–2 mm 1.5–2 mm minimum gap width ≥ 6.8 mm implant shoulder Ø 4.8 mm at least 1 mm Implant distance between adjacent teeth 1. as a first step, the distance between two teeth can be determined by the width of the gap. Depending on the tooth shape, the width of the gap is about 1 mm (2x 0.5 mm) less than the distance at bone level. 2. mesio-distally there should be a distance of 1.5 – 2 mm from the implant shoulder to the adjacent tooth at bone level. 3. the minimum gap width for the various implant types can be derived according to this basic rule. for example: implant shoulder Ø 4.8 mm + 2x 1 mm ≥ 6.8 mm minimum gap width.
in the examples given here, the measurement was always made at bone level from the adjacent tooth or adjacent implant to the center of the implant. 12.5 mm 3 mm 5.5 mm 4 mm Narrow Neck 4 mm 7 mm 7 mm 17 mm 4 mm 8 mm 5 mm Regular Neck Wide Neck 5.5 mm Minimum gap width: shoulder-Ø 3.5 mm + 2 mm ≥ 5.5 mm 6.8 mm Minimum gap width: shoulder-Ø 4.8 mm + 2 mm ≈ 7 mm 8.5 mm Minimum gap width: shoulder-Ø 6.5 mm + 2 mm ≥ 8.5 mm 1
Page 1 and 2: Basic info
Page 3 and 4: contents 1. Straumann ® Dental Imp
Page 5 and 6: Available surfaces: SLActive and SL
Page 7 and 8: p Contraindications p restorations
Page 9 and 10: Prosthetic restoration Notes rn syn
Page 11 and 12: 2. PrinciPLes of treatment PLanninG
Page 13 and 14: Local aspects General local prerequ
Page 15: 3. treatment PLanninG careful treat
Page 19 and 20: Planning aids for determining the v
Page 21 and 22: Planning aids for implant selection
Page 23 and 24: Custom made drilling templates a cu
Page 25 and 26: 4. surGicaL instruments the instrum
Page 27 and 28: Cleaning and care of instruments Ca
Page 29 and 30: Tips on surgical procedure rapid su
Page 31 and 32: p Multi-use profile drill: there ar
Page 33 and 34: p Manual tapping at the top of the
Page 35 and 36: Preparation of the implant bed for
Page 37 and 38: Insertion Standard implant Ø 4.1 m
Page 39 and 40: Preparation of the implant bed for
Page 41 and 42: Correct fit of the Tapered Effect i
Page 43 and 44: Surgical auxiliary instruments Adap
Page 45 and 46: Implantation procedure SLA ® Openi
Page 47 and 48: p move the implant into final posit
Page 49 and 50: p attach the ratchet (the clockwise
Page 51 and 52: 7. imPLant cLosure after implantati
Page 53 and 54: Immediate restoration of Straumann
Page 55 and 56: Temporary restoration healing caps
Page 57 and 58: 9. aDDitionaL ProDucts Osteotomes p
Page 59 and 60: 10. aDDitionaL information<
Page 61: IMPORTANT NOTES Disclaimer of liabi

Basic information on the SURGICAL PROCEDURE - Straumann

Create successful ePaper yourself

Delete template?

Save as template?