Document, IMA CLI Protocol Specification - Livewire Connections Ltd

More documents

Recommendations

Info

Document, IMA CLI Protocol Specification3.3 satelliteStores all antenna related settings of the system.3.3.1 description This set/show satellite description. Support up to 32 characters.Default: [Enter Description]3.3.2 lon This set/show satellite longitude.Range: [0.0 - 360.0] [E/W]Default: 101.0 W3.3.3 freq This set/show satellite frequency.Range: 950.0 – 2150.0 (MHz)Default: 1234.5673.3.4 skew This set/show satellite skew.Range: -90.0 – 90.0 (degree)Default: 0.03.3.5 band This set/show satellite band.Range: 1 - 4Default: 23.3.6 tx_pol This set/show satellite transmit polarity. The possible values cover linear and circular polarization.Value: H, V, L, R.Default: H.3.3.7 search_pattern This set/show search pattern that is used to search this satellite.Value: spiral, inclined, sky_search.Default: spiral.3.3.8 reflector This set/show the antenna or reflector that is used for this satellite.Value: primary_reflector, secondary_reflector.Default: primary_reflector.3.3.9 lnb This set/show the LNB that is used for this satellite.Value: copol, xpol.Default: xpol.3.3.10 thresholdStores the threshold settings. The threshold value serves as the main signal threshold to be usedfor search and dishscan operation.3.3.10.1 auto_mode This set/show the threshold mode used for this satellite.Value: on, offDefault: on.3.3.10.2 auto_offset This set/show the offset for auto threshold mode. Applicable only when threshold mode is auto.Value: 0 - 300Default: 100.3.3.10.3 manual_value This set/show the manual threshold value. Applicable only when threshold mode is auto.Value: 0 - 3000Default: 100.Page 38 of 52Document No135163 Rev B
Document, IMA CLI Protocol Specification3.4 shipStores ship related settings.3.4.1 name This set/show the ship name. Support up to 32 characters.Default: [Enter Ship Name]3.4.2 heading This set/show the ship heading.Range: 0.0 – 360.0Default: 0.03.4.3 lat This set/show the ship latitude.Range: [0.0 - 90.0] [N/S]Default: 0.0 N3.4.4 lon This set/show the ship longitude.Range: [0.0 - 360.0] [E/W]Default: 0.0 E3.5 systemStores system related settings, both reflector-specific and common settings.3.5.1 primary_reflector, secondary_reflectorStores reflector-specific settings.3.5.1.1 auto_threshThis set will start/initiate calculate Auto Theshold operation. This is an action command.3.5.1.2 auto_trimThis set will start/initiate calculate Auto Trim operation. This is an action command.3.5.1.3 trimStores trim setting property. Trim is used to apply offset to align the antenna.3.5.1.3.1 el This set/show trim for elevation axis.Value: -45.0 – 45.0 (degree)Default: 0.03.5.1.3.2 az This set/show trim for azimuth axis.Value: -180.0 – 180.0 (degree)Default: 0.03.5.1.4 sensitivityStores sensitivity settings for elevation and azimuth axes. Sensitivity affects the signal thresholdused in dishscan operation. Higher the sensitivity lower the threshold will be.3.5.1.4.1 el This set/show sensitivity for elevation axis.Range: 10 – 100 (%)Default: 503.5.1.4.2 az This set/show sensitivity for elevation axis.Range: 10 – 100 (%)Default: 503.5.1.5 polangStores polarity angle of the antenna feed.3.5.1.5.1 drive This set/show polang drive type.Value: auto, manual.Default: autoPage 39 of 52Document No135163 Rev B
Page 2 and 3: Command Line Tree Structure:Documen
Page 4 and 5: Set Interface (2 of 7)Document, IM
Page 10 and 11: Document, IMA CLI Protocol Specific
Page 14 and 15: Set System (2 of 6)Document, IMA C
Page 18 and 19: Set System (6 of 6)Document, IMA C
Page 20 and 21: Show Interface (1 of 5)Document, I
Page 28 and 29: Show System (2 of 4)Document, IMA
Page 30 and 31: Show System (4 of 4)Document, IMA
Page 52: 5.0 Error Table:Document, IMA CLI P

Document, IMA CLI Protocol Specification - Livewire Connections Ltd

Create successful ePaper yourself

Delete template?

Save as template?