Document, IMA CLI Protocol Specification - Livewire Connections Ltd

More documents

Recommendations

Info

Document, IMA CLI Protocol Specification3.1.1.6.1 port This set/show the UDP port number.Range: 0-65535.Default: 30003.1.1.6.2 enable Enable or disable the port.Value: on, off.Default: on.3.1.1.7 webStores the Web port information.3.1.1.7.1 port This set/show the Web port number.Range: 0-65535.Default: 803.1.1.7.2 enable Enable or disable the port.Value: on, off.Default: on.3.1.1.8 secure_webStores the Secure Web port information.3.1.1.8.1 port This set/show the Web port number.Range: 0-65535.Default: 4433.1.1.8.2 enable Enable or disable the port.Value: on, off.Default: on.3.1.1.9 tcp:0, tcp:1, tcp:2, tcp:3These groups store the TCP port information.3.1.1.9.1 port This set/show the port number.Range: 0-65535.Default:tcp:0 = 2000tcp:1 = 2001tcp:2 = 2002tcp:3 = 20033.1.1.9.2 enable Enable or disable the port.Value: on, off.Default: on.3.1.1.9.3 mode This set/show the mode of the port.Value: legacy, openamip, cli.Default:tcp:0 = legacytcp:1 = legacytcp:2 = openamiptcp:3 = cli3.1.1.9.4 secure This set/show the secure mode of this interface. ON means access to this interface willrequire proper credential (login). OFF means no credential required.Value: on, off.Page 34 of 52Document No135163 Rev B
Document, IMA CLI Protocol SpecificationDefault:tcp:0 = offtcp:1 = offtcp:2 = offtcp:3 = on3.1.2 baudrateStores the baud rate for all serial ports.3.1.2.1 rf_m&c This set/show the baud rate of rf_m&c serial port.Range: 4800 – 115200 (bps).Default: 9600 bps.3.1.2.2 passthrough This set/show the baud rate of passthrough serial port.Range: 4800 – 115200 (bps).Default: 9600 bps.3.1.2.3 mxpThis set/show the baud rate of MXP’s serial port.3.1.2.3.1 aux232 This set/show the baud rate of Aux232 serial port.Range: 4800 – 115200 (bps).Default: 9600 bps.3.1.2.3.2 obm_modem This set/show the baud rate of OBM_Modem serial port.Range: 4800 – 115200 (bps).Default: 4800 bps.3.1.2.3.3 nmea_0183 This set/show the baud rate of NMEA 0183 port.Range: 4800 – 115200 (bps).Default: 4800 bps.3.1.2.3.4 console This set/show the baud rate of console port.Range: 4800 – 115200 (bps).Default: 115200 bps.3.1.2.4 icuThis set/show the baud rate of ICU’s serial port.3.1.2.4.1 console This set/show the baud rate of console serial port.Range: 4800 – 115200 (bps).Default: 115200 bps.3.1.3 nmea_0183Stores NMEA 0183 settings.3.1.3.1 messageStores the GPS message the system sends/streams. Support up to four different settings(defined by the index).3.1.3.1.1 1, 2, 3, 4 This set/show the GPS message the system sends/streams for particular index.Value: OFF, GGA, GLL, HDD, HDG, HDM, HDT, RMC, VTG.Default:1 = GLL2 = GGA3 = OFF4 = OFFPage 35 of 52Document No135163 Rev B
Page 2 and 3: Command Line Tree Structure:Documen
Page 4 and 5: Set Interface (2 of 7)Document, IM
Page 10 and 11: Document, IMA CLI Protocol Specific
Page 14 and 15: Set System (2 of 6)Document, IMA C
Page 18 and 19: Set System (6 of 6)Document, IMA C
Page 20 and 21: Show Interface (1 of 5)Document, I
Page 28 and 29: Show System (2 of 4)Document, IMA
Page 30 and 31: Show System (4 of 4)Document, IMA
Page 52: 5.0 Error Table:Document, IMA CLI P

Document, IMA CLI Protocol Specification - Livewire Connections Ltd

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?