13.07.2015 Views

Muskrat - Association of Fish and Wildlife Agencies

Muskrat - Association of Fish and Wildlife Agencies

Muskrat - Association of Fish and Wildlife Agencies

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Figure MK7a. Unmodified jaw coilspringtrap (open)Unmodified Jaws (Figures MK7a <strong>and</strong> MK7b)Average Mechanical Description <strong>and</strong> AttributesInside jaw spread (at dog): 3 11 / 16 inchesInner width: 3 3 / 16 inchesInside width at jaw hinge posts: 3 1 / 2 inchesJaw width: 3 / 8 inch smooth round jawJaw thickness: 1 / 8 inchMain trap springs: Two 0.113 inch diameter wire coil-springsBase plate: Not reinforcedPan stop: YesAny trap that has similar specifications may be considered a BMP trap regardless<strong>of</strong> br<strong>and</strong> or source <strong>of</strong> modification, although performance information on all otherBMP criteria (see Introduction: “Criteria for Evaluation <strong>of</strong> Trapping Devices” pages 4-6)needs to be considered as well. The trap tested was the Woodstream Victor No. 1coil-spring.Figure MK7b. Unmodified jaw doublelongspringtrap (open)Additional Information• For use in submersion sets only.• Chain attachment used in trap testing: six inch center-mounted with two swivels, onein-line shock spring, <strong>and</strong> anchored with a stake. When using submersion sets, chainlength should be short enough to prevent captured animals from resurfacing.• Selectivity features: Brass pan tension machine screw; pan tension was loosened so thatthe pan moved freely, <strong>and</strong> was checked <strong>and</strong> readjusted as needed after every capture.• Special considerations for practicality: This device also meets BMP criteria for raccoonsin the southeastern United States, <strong>and</strong> mink <strong>and</strong> nutria in submersion sets.Average Mechanical Description <strong>and</strong> AttributesInside jaw spread (at dog): 3 7 / 8 inchesInner width: 3 1 / 8 inchesInside width at jaw hinge posts: 3 7 / 16 inchesJaw width: 1 / 2 inchJaw thickness: 1 / 8 inchLength <strong>of</strong> main trap springs: 4 3 / 8 inchesThickness <strong>of</strong> main trap springs: 1 / 16 inchWidth <strong>of</strong> main trap springs: 1 1 / 2 inches narrowing to5/ 8 inchBase plate: Not reinforcedPan stop: YesAny trap that has similar specifications may be considered a BMP trap regardless<strong>of</strong> br<strong>and</strong> or source <strong>of</strong> modification, although performance information on all otherBMP criteria (see Introduction: “Criteria for Evaluation <strong>of</strong> Trapping Devices” pages 4-6)needs to be considered as well. The trap tested was the Sleepy Creek No. 11double-longspring trap.MUSKRAT 6<strong>Association</strong> <strong>of</strong> <strong>Fish</strong> <strong>and</strong> <strong>Wildlife</strong> <strong>Agencies</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!