Installation Manual - Model 5 - Tundra Process Solutions Ltd.
Installation Manual - Model 5 - Tundra Process Solutions Ltd.
Installation Manual - Model 5 - Tundra Process Solutions Ltd.
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
REV (-01-)INSTALLATION MANUAL – D510. Attach the L-shaped bracket to the pulley support using 7/16-inch screws (see Figure 12).PulleysupportL-shapedbracketFigure 12. Attaching L-bracket11. Align the hole through the pulley support with the threaded hole in the cylinder. Securepulley assembly using the existing cylinder 1 1/2-inch bolt and lock washer. Tighten boltwith the impact wrench (see Figure 13).Cylinder(ref)Pulley(ref)Pulley SupportMounting BoltFigure 13. Pulley <strong>Installation</strong> in Cylinder12. Feed a metal wire attached to the chain on the base side, and slowly feed the attachedchain links through the PVC pipe (see Figure 14).Metal wireFigure 14. Inserting the Chain through PVC PipeSECTION 3 – TOOLS & SPECIAL EQUIPMENT13