Installation Manual - Model 5 - Tundra Process Solutions Ltd.

REV A (05-01-09)INSTALLATION MANUAL – D54. Secure the pulley side of the cylinder using two 1-inch x 2-1/2- inch bolts, four flatwashers, two 1-inch lock washers and nuts (see Figure 6).Pulley sideCylinderCylinder bolts(2x)Figure 6. Securing the Cylinder (Pulley Side)5. Install a rubber wiper with inserted o-ring onto the cylinder (see Figure 7).Wiper ando-ringFigure 7. Installing the Wiper Ring6. Loosen cylinder attach bolts, and install wiper tabs over the bolts to secure thewiper ring to the cylinder shaft, then retighten attach bolts (see Figure 8).WiperFigure 8. Installing Wiper TabsSECTION 3 – TOOLS & SPECIAL EQUIPMENT11