VCP25.1 Project Planning Manual - Bosch Rexroth

More documents

Recommendations

Info

4-6 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 25 | R911299720 / 02Technical Data
R911299720 / 02 | Rexroth IndraControl VCP 25 Electric Drives and Controls | Bosch Rexroth AG 5-1Dimensions5 Dimensions5.1 InstallationWhen installing the operator terminal, keep a minimum clearance of30 mm (1.181") around the operator terminal to ensure adequate air circulation.When the operator terminal is installed horizontally, please note that additionalsources of heat beneath the operator terminal may result in heataccumulation.Provide for sufficient heat dissipation!Comply with the allowable temperature range listed in the technical datafor the use of the operator terminal!To maintain the specified degree of protection, make sure the seal isevenly seated on the installation surface and the hexagon nuts are tighteneduniformly.Ensure that the maximum torque of 1.2 Nm is not exceeded.The operator terminal can be easily and quickly mounted from the rearof the operator terminal. This is particularly recommended for mountingin switchboards with a plate thickness of approx. 1 mm to 8 mm(approx. 0.039" to 0.315").1. Insert the operator terminal from the front through the mounting cutout.2. Fasten the operator terminal using hexagon nuts.
Page 1: IndustrialHydraulicsElectric Drives
Page 5 and 6: R911299720 / 02 | Rexroth IndraCont
Page 25: R911299720 / 02 | Rexroth IndraCont
Page 77 and 78:
R911299720 / 02 | Rexroth IndraCont
Page 79 and 80:
R911299720 / 02 | Rexroth IndraCont
Page 82:
Bosch Rexroth AGElectric Drives and
show all

VCP25.1 Project Planning Manual - Bosch Rexroth

Create successful ePaper yourself

Delete template?

Save as template?