VCP25.1 Project Planning Manual - Bosch Rexroth

More documents

Recommendations

Info

3-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth IndraControl VCP 25 | R911299720 / 02Safety Instructions for Electric Drives and Controls3.3 Hazards by Improper UseDANGERHigh voltage and high discharge current! Danger to life or severe bodilyharm by electric shock!DANGERDangerous movements! Danger to life, severe bodily harm or materialdamage by unintentional motor movements!WARNINGHigh electrical voltage due to wrong connections! Danger to life or bodilyharm by electric shock!WARNINGHealth hazard for persons with heart pacemakers, metal implants andhearing aids in proximity to electrical equipment!CAUTIONSurface of machine housing could be extremely hot! Danger of injury!Danger of burns!CAUTIONRisk of injury due to improper handling! Bodily harm caused by crushing,shearing, cutting and mechanical shock or incorrect handling ofpressurized systems!CAUTIONRisk of injury due to incorrect handling of batteries!3.4 General Information• Bosch Rexroth AG is not liable for damages resulting from failure toobserve the warnings provided in this documentation.• Read the operating, maintenance and safety instructions in your languagebefore starting up the machine. If you find that you cannotcompletely understand the documentation for your product, pleaseask your supplier to clarify.• Proper and correct transport, storage, assembly and installation aswell as care in operation and maintenance are prerequisites for optimaland safe operation of this equipment.• Only persons who are trained and qualified for the use and operationof the equipment may work on this equipment or within its proximity.
R911299720 / 02 | Rexroth IndraControl VCP 25 Electric Drives and Controls | Bosch Rexroth AG 3-3Safety Instructions for Electric Drives and Controls• Furthermore, they must be trained, instructed and qualified to switchelectrical circuits and equipment on and off in accordance with technicalsafety regulations, to ground them and to mark them accordingto the requirements of safe work practices. They must have adequatesafety equipment and be trained in first aid.• Only use spare parts and accessories approved by the manufacturer.• Follow all safety regulations and requirements for the specific applicationas practiced in the country of use.• The equipment is designed for installation in industrial machinery.• The ambient conditions given in the product documentation must beobserved.• Use only safety features and applications that are clearly and explicitlyapproved in the Project Planning Manual.• For example, the following areas of use are not permitted: constructioncranes, elevators used for people or freight, devices and vehiclesto transport people, medical applications, refinery plants,transport of hazardous goods, nuclear applications, applicationssensitive to high frequency, mining, food processing, control of protectionequipment (also in a machine).• The information given in the documentation of the product with regardto the use of the delivered components contains only examplesof applications and suggestions.The machine and installation manufacturer must• make sure that the delivered components are suited for his individualapplication and check the information given in this documentationwith regard to the use of the components,• make sure that his application complies with the applicable safetyregulations and standards and carry out the required measures,modifications and complements.• Startup of the delivered components is only permitted once it is surethat the machine or installation in which they are installed complieswith the national regulations, safety specifications and standards ofthe application.• Operation is only permitted if the national EMC regulations for the applicationare met.• The instructions for installation in accordance with EMC requirementscan be found in the documentation "EMC in Drive and ControlSystems".• Technical data, connections and operational conditions are specifiedin the product documentation and must be followed at all times.The machine or installation manufacturer is responsible for compliancewith the limiting values as prescribed in the national regulations.• Technical data, connections and operational conditions are specifiedin the product documentation and must be followed at all times.
Page 1: IndustrialHydraulicsElectric Drives
Page 5 and 6: R911299720 / 02 | Rexroth IndraCont
Page 11: R911299720 / 02 | Rexroth IndraCont
Page 63 and 64:
R911299720 / 02 | Rexroth IndraCont
Page 65 and 66:
Page 67 and 68:
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Page 82:
Bosch Rexroth AGElectric Drives and
show all

VCP25.1 Project Planning Manual - Bosch Rexroth

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?