HX8347 - Adafruit

HX8347-G(T)240RGB x 320 dot, 262K color, TFT Mobile Single Chip Driver8.5.2 Serial interface characteristicsDATA SHEET Preliminary V01Figure 8.4: Serial interface characteristics(VSSA=0V, IOVCC=1.65V to 3.3V, VCI=2.3V to 3.3V, T A =-30 to 70°C)Parameter Symbol ConditionsSpec.Min. Typ. Max.UnitSerial clock cycle (Write)SCL ”H” pulse width (Write)tSCYCWtSHW SCL208---- nsSCL ”L” pulse width (Write) tSLW8 - -Data setup time (Write) tSDSSDIO10 - -nsData hold time (Write)Serial clock cycle (Read)SCL ”H” pulse width (Read)SCL ”L” pulse width (Read)Access TimeOutput disable timetSDHtSCYCRtSHRtSLRtACCtOHSCLSDI for maximumCL=30pFFor minimum CL=8pFSDO For maximumCL=30pFFor minimum CL=8pF101506060--------ns10 - 50 ns15 - 50 nsSCL to Chip select tSCC SCL, NCS 20 - - nsNCS “H” pulse width tCHW NCS 40 - - nsChip select setup timetCSS15 - -NCSChip select hold timetCSH15 - -nsNote: The input signal rise time and fall time (tr, tf) is specified at 15 ns or less.Logic high and low levels are specified as 30% and 70% of IOVCC for Input signals.Himax ConfidentialFor Go-tek OnlyThis information contained herein is the exclusive property of Himax and shall not be distributed, reproduced, or disclosedin whole or in part without prior written permission of Himax.-P.180-October, 2009