13.07.2015 Views

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

Configuring a WAN InterfaceConfigurable activation and deactivation delays provide a damping effect on <strong>the</strong> backupinterface pair. This eliminates primary-to-backup switching in case <strong>of</strong> fluctuating underlyingLayer 2 interfaces. You can configure <strong>the</strong> following backup delays using <strong>the</strong> backup delaycommand:●Failure delay — The time in seconds between <strong>the</strong> primary interface going down and<strong>the</strong> backup interface activation. Default = 0 seconds, maximum = 3600 seconds.● Secondary Disable delay — The time in seconds between <strong>the</strong> primary interfacerestoration and <strong>the</strong> backup interface deactivation. Default = 0 seconds, maximum = 3600seconds. Both interfaces are active during this time to enable a smooth transition for <strong>the</strong>routing protocols. To keep <strong>the</strong> backup interface active indefinitely, use never as <strong>the</strong>secondary disable delay.For example, you can use <strong>the</strong> following command to switch over immediately to <strong>the</strong> backupinterface in case <strong>of</strong> failure, and pause 60 seconds before reverting to <strong>the</strong> primary interface:G<strong>G350</strong>-001(super)# interface FastE<strong>the</strong>rnet 10/2<strong>G350</strong>-001(super-if:FastE<strong>the</strong>rnet 10/2)# backup delay 0 60Done!<strong>G350</strong>-001(super-if:FastE<strong>the</strong>rnet 10/2)#The following rules govern <strong>the</strong> interface backup relations:●●●Each interface can have only one backup interface.A backup interface can serve as a backup for only one o<strong>the</strong>r interface.Only one member <strong>of</strong> a primary and backup pair is active at any given time. An interface isautomatically deactivated when configured as backup.● The backup implementation does not protect against <strong>the</strong> failure <strong>of</strong> both interfaces.Therefore, if a backup interface fails while active, no switch to <strong>the</strong> primary interface isattempted.When using frame relay encapsulation, <strong>the</strong> frame relay interface is considered down when itsprimary DLCI is down. The switch over back to <strong>the</strong> main interface occurs when <strong>the</strong> primary DataLink Connection Identifier (DLCI) is restored.Note:Note:The backup interface is not activated when <strong>the</strong> primary interface isadministratively disabled.98 <strong>Administration</strong> <strong>of</strong> <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong>

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!