Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring RTCP QoS parametersConfiguring RTCP QoS parametersUse the following commands to configure QoS monitoring for RTCP:●●Use the set qos rtcp command to permit the setup of RTCP parameters. Theparameters that can be set are enabling or disabling RTCP reporting capability, setting theIP address of the monitor, setting the reporting period (the default is 5 sec.), and definingthe listening port number.Use the show qos-rtcp command to display QoS, RSVP, and RTCP parameters.Configuring RSVP parametersVoIP uses the RSVP protocol to reserve network resources for voice data while communicatingwith other media gateways and other VoIP entities, such as IP phones and Softphones.●●Use the set qos rsvp command to set the current values for the RSVP parameters ofthe VoIP engines. The parameters that can be set are enabled/disabled, refresh rate(seconds), failure retry (y or n), and service profile (Guaranteed or Controlled).Use the show qos-rtcp command to display QoS, RSVP, and RTCP parameters.Issue 3 January 2005 75