Administration of the Avaya G350 Media Gateway - Avaya Support

Configuring loggingTable 5: Logging applications 2 of 2ApplicationvoicewanDescriptionVoice failuresWAN plugged-in expansion2 of 2To define a filter that applies to every application, type all instead of the application.Use the set logging file condition command to create a filter for system messagesthat are logged to a log file. The following example defines a filter in which QoS messages witha severity level of Critical or higher are sent to the log file:set logging file condition qos criticalUse the set logging session condition command to create a filter for systemmessages that are displayed on the terminal screen. The following example defines a filter inwhich all messages with a severity level of Warning or higher are displayed on the screen:set logging session condition all warningUse the set logging server condition command to create a filter for system messagesthat are logged to the specified Syslog server. In addition to the application and severity level,you must specify the IP address of the Syslog server to which you want to apply the filter. Thefollowing example defines a filter in which no RIP messages are sent to the Syslog server withthe IP address 175.5.16.33:set logging server condition rip none 175.5.16.3370 Administration of the Avaya G350 Media Gateway