Administration of the Avaya G350 Media Gateway - Avaya Support

More documents

Recommendations

Info

Configuring loggingFilters and severity levelsYou can use filtering options to reduce the number of collected and transmitted messages. Thefiltering options are based on message classification by application and severity. For a specifiedsink, you can define the threshold severity for message output for each application. Messageswith a severity lower than the defined threshold are sent to the specified sink, and those with ahigher severity than the defined threshold are not sent.Table 4 lists the eight available severity levels.To configure a filter that will eliminate all messages for the specified application, type noneinstead of a severity level.The sinks have the following default severity levels:● Session — warning●Table 4: Severity levelsSeverity level Code DescriptionEmergency 0 System is unusableAlert 1 Immediate action requiredCritical 2 Critical conditionError 3 Error conditionWarning 4 Warning conditionNotification 5 Normal but significant conditionInformational 6 Informational message onlyDebugging 7 Message that only appears during debuggingLog file — informational● Syslog — warningFilters are defined per application. Table 5: Logging applications on page 69 lists theapplications for which you can define filters.68 Administration of the Avaya G350 Media Gateway
Filters and severity levelsTable 5: Logging applications 1 of 2Applicationbootcascadecliconfigconsoledhcpsfanfilesysipsecisakmplagpoepolicyppppppoeqosroutersnmpstpsupplyswitchfabricsystemthresholdusb-modemvlanDescriptionSystem startup failuresStack CASCADE mechanismCLIConfiguration changesSerial modem messagesDHCP server packageCooling systemFile system problem (flash)VPN packageISAKMP protocolLink Aggregation packagePower over EthernetPolicy packagePPP protocolPPP over EthernetQoS messagesCore routing system failuresSNMP agentSpanning tree packagePower supply systemSwitch fabric failuresOperating system failuresRMON alarmsUSB modem messagesVLAN package1 of 2Issue 3 January 2005 69
Page 1 and 2:
Administration of theAvaya G350 Med
Page 3 and 4:
Electromagnetic Compatibility (EMC)
Page 5:
ContentsAbout this Book . . . . . .
Page 8 and 9:
ContentsConfiguring PPP . . . . . .
Page 10 and 11:
ContentsPort classification . . . .
Page 12 and 13:
ContentsConfiguring VRRP . . . . .
Page 14 and 15:
ContentsChapter 19: Configuring pol
Page 16 and 17:
Contents16 Administration of the Av
Page 18 and 19: About this Book4. Scroll down to fi
Page 20 and 21: About this BookSending us commentsA
Page 22 and 23: Introduction●●●●●●●
Page 24 and 25: Configuration overviewIf you intend
Page 26 and 27: Configuration overviewSaving config
Page 28 and 29: Accessing the Avaya G350 Media Gate
Page 50 and 51: Basic device configurationConfiguri
Page 52 and 53: Basic device configurationThe Media
Page 54 and 55: Basic device configurationSetting r
Page 56 and 57: Basic device configuration●●●
Page 58 and 59: Basic device configurationEach firm
Page 60 and 61: Basic device configurationThe follo
Page 62 and 63: Configuring Ethernet portsConfiguri
Page 64 and 65: Configuring Ethernet portsWAN Ether
Page 66 and 67: Configuring loggingSyslog serverA S
Page 70 and 71: Configuring loggingTable 5: Logging
Page 72 and 73: Configuring VoIP QoSConfiguring RTP
Page 74 and 75: Configuring VoIP QoSConfiguring QoS
Page 76 and 77: Configuring VoIP QoSConfiguring Wei
Page 78 and 79: Configuring the G350 for modem useN
Page 80 and 81: Configuring the G350 for modem use8
Page 82 and 83: Configuring a WAN Interface●●
Page 84 and 85: Configuring a WAN InterfaceFigure 3
Page 86 and 87: Configuring a WAN Interface3. Use t
Page 88 and 89: Configuring a WAN InterfaceE1/T1 de
Page 90 and 91: Configuring a WAN InterfaceUSP defa
Page 94 and 95: Configuring a WAN Interfacetrying t
Page 96 and 97: Configuring a WAN Interface8. Use t
Page 98 and 99: Configuring a WAN InterfaceConfigur
Page 102 and 103: Configuring a WAN InterfaceNote:Not
Page 104 and 105: Configuring a WAN InterfaceIf one o
Page 106 and 107: Configuring a WAN InterfacePPP VoIP
Page 108 and 109: Configuring a WAN Interface● VLAN
Page 110 and 111: Configuring a WAN Interface110 Admi
Page 112 and 113: Configuring PoELoad detectionThe MM
Page 114 and 115: Configuring PoEPoE configuration CL
Page 116 and 117: Configuring PoE116 Administration o
Page 118 and 119:
Configuring Emergency Transfer Rela
Page 120 and 121:
Configuring SNMPThere are several w
Page 122 and 123:
Configuring SNMPUsersSNMPv3 uses th
Page 124 and 125:
Configuring SNMPGroup NameSecurityM
Page 126 and 127:
Configuring SNMP- notification type
Page 128 and 129:
Configuring SNMPConfiguring dynamic
Page 130 and 131:
Configuring SNMPThe following examp
Page 132 and 133:
Configuring advanced switchingVLAN
Page 134 and 135:
Configuring advanced switchingMulti
Page 136 and 137:
Configuring advanced switching●
Page 138 and 139:
Configuring advanced switchingRelia
Page 140 and 141:
Configuring advanced switchingSwitc
Page 142 and 143:
Configuring advanced switchingPort
Page 144 and 145:
Configuring advanced switchingThe S
Page 146 and 147:
Configuring advanced switching●Po
Page 148 and 149:
Configuring advanced switchingThe f
Page 150 and 151:
Configuring advanced switchingPort
Page 152 and 153:
Configuring contact closureContact
Page 154 and 155:
Configuring contact closure154 Admi
Page 156 and 157:
Configuring RMON monitoringRMON CLI
Page 158 and 159:
Configuring RMON monitoring158 Admi
Page 160 and 161:
Configuring the routerOverview of t
Page 162 and 163:
Configuring the routerLayer 2 logic
Page 164 and 165:
Configuring the routerStatic routes
Page 166 and 167:
Configuring the routerRouting table
Page 168 and 169:
Configuring the routerRouting packe
Page 170 and 171:
Configuring the routerThe following
Page 172 and 173:
Configuring the routerDynamic MTU d
Page 174 and 175:
Configuring the routerAdditional GR
Page 176 and 177:
Configuring the routerYou can use t
Page 178 and 179:
Configuring the routerDHCP/BOOTP re
Page 180 and 181:
Configuring the routerApplication
Page 182 and 183:
Configuring the routerNote:Note:If
Page 184 and 185:
Configuring the routerG350-001(supe
Page 186 and 187:
Configuring the routerDirected broa
Page 188 and 189:
Configuring the routerDynamic ARP t
Page 190 and 191:
Configuring the routerConfiguring I
Page 192 and 193:
Configuring the routerPoison-revers
Page 194 and 195:
Configuring the router●●●●U
Page 196 and 197:
Configuring the routerOSPF commands
Page 198 and 199:
Configuring the routerand what metr
Page 200 and 201:
Configuring the router●●●●
Page 202 and 203:
Configuring the routerReassembly pa
Page 204 and 205:
Configuring IPSec VPNConfiguring a
Page 206 and 207:
Configuring IPSec VPNConfiguring IP
Page 208 and 209:
Configuring IPSec VPNPrerequisite -
Page 210 and 211:
Configuring IPSec VPN●hash: the h
Page 212 and 213:
Configuring IPSec VPNTo configure p
Page 214 and 215:
Configuring IPSec VPN3. Exit crypto
Page 216 and 217:
Configuring IPSec VPN9. Exit crypto
Page 218 and 219:
Configuring IPSec VPNIPSec VPN main
Page 220 and 221:
Configuring IPSec VPN2. Use the set
Page 222 and 223:
Configuring IPSec VPNConfiguring th
Page 224 and 225:
Configuring IPSec VPNip-rule 30sour
Page 226 and 227:
Configuring IPSec VPNFull or partia
Page 228 and 229:
Configuring IPSec VPN2. Configure b
Page 230 and 231:
Configuring IPSec VPNip-rule 4sourc
Page 232 and 233:
Page 234 and 235:
Configuring IPSec VPN2. Configure B
Page 236 and 237:
Page 238 and 239:
Configuring IPSec VPNInterface vlan
Page 240 and 241:
Configuring IPSec VPN3. Allowed ICM
Page 242 and 243:
Configuring IPSec VPNip access-cont
Page 244 and 245:
Page 246 and 247:
Configuring IPSec VPNFigure 21: Ful
Page 248 and 249:
Configuring IPSec VPNConfiguration
Page 250 and 251:
Page 252 and 253:
Configuring IPSec VPN252 Administra
Page 254 and 255:
Configuring policyAccess control li
Page 256 and 257:
Configuring policyDefining policy l
Page 258 and 259:
Configuring policyAttaching policy
Page 260 and 261:
Configuring policyDevice-wide polic
Page 262 and 263:
Configuring policyEditing and creat
Page 264 and 265:
Configuring policySource and destin
Page 266 and 267:
Configuring policyComposite operati
Page 268 and 269:
Configuring policy●●●CoS —
Page 270 and 271:
Configuring policyThe following com
Page 272 and 273:
Configuring policySimulating packet
Page 274 and 275:
Configuring policy-based routingPol
Page 276 and 277:
Configuring policy-based routingCon
Page 278 and 279:
Configuring policy-based routing●
Page 280 and 281:
Configuring policy-based routingMod
Page 282 and 283:
Configuring policy-based routingEdi
Page 284 and 285:
Configuring policy-based routingIn
Page 286 and 287:
Configuring policy-based routingThe
Page 288 and 289:
Setting synchronizationIf, for any
Page 290 and 291:
FIPSFigure 26: Image of the cryptog
Page 292 and 293:
FIPSSupported algorithmsThe cryptog
Page 294 and 295:
FIPSSecurity levelThe cryptographic
Page 296 and 297:
FIPSTable 14: Roles and required id
Page 298 and 299:
FIPSTable 15: Critical security par
Page 300 and 301:
FIPSCSP access rights within roles
Page 302 and 303:
FIPSTable 18 shows Role and Service
Page 304 and 305:
FIPSTable 18: Role and service acce
Page 306 and 307:
FIPSPassword guidelinesBelow are ge
Page 308 and 309:
FIPS2. Define the PMI (Primary Mana
Page 310 and 311:
FIPS10. Physically disconnect all n
Page 312 and 313:
FIPS18. To configure all interfaces
Page 314 and 315:
FIPS●Use the snmp-server user use
Page 316 and 317:
FIPS●●TFTPSNMPExample:G350-001(
Page 318 and 319:
FIPSG350-N(super)# ip crypto-list 9
Page 320 and 321:
FIPSError statesTable 19 describes
Page 322 and 323:
FIPSConsiderationsThe following rul
Page 324 and 325:
Traps and MIBsNameParameters(MIB va
Page 326 and 327:
Page 328 and 329:
Page 330 and 331:
Page 332 and 333:
Traps and MIBsMIB FileIP-FORWARD-MI
Page 334 and 335:
Traps and MIBsObjectOIDgenOpResetSu
Page 336 and 337:
Traps and MIBsThe following table p
Page 338 and 339:
Traps and MIBsObject OIDipCidrRoute
Page 340 and 341:
Traps and MIBsObject OIDgenMemUtili
Page 342 and 343:
Traps and MIBsObject OIDdsx1Circuit
Page 344 and 345:
Page 346 and 347:
Traps and MIBsObject OIDipOutDiscar
Page 348 and 349:
Traps and MIBsObject OIDsnmpOutBadV
Page 350 and 351:
Page 352 and 353:
Traps and MIBsObject OIDdistributio
Page 354 and 355:
Traps and MIBsObject OIDrs232SyncPo
Page 356 and 357:
Traps and MIBsObject OIDifInUnknown
Page 358 and 359:
Traps and MIBsObject OIDdsx1Fdl 1.3
Page 360 and 361:
Page 362 and 363:
Traps and MIBsObject OIDipPolicyCon
Page 364 and 365:
Traps and MIBsObject OIDipPolicyCom
Page 366 and 367:
Page 368 and 369:
Traps and MIBsObject OIDchGroupList
Page 370 and 371:
Traps and MIBsObject OIDgenGroupLog
Page 372 and 373:
Traps and MIBsObject OIDcmgModuleSe
Page 374 and 375:
Traps and MIBsObject OIDcmgVoipLoca
Page 376 and 377:
Traps and MIBsObject OIDfrCircuitDl
Page 378 and 379:
Traps and MIBsObject OIDipAdEntIfIn
Page 380 and 381:
Traps and MIBsObject OIDpppLinkStat
Page 382 and 383:
Traps and MIBsObject OIDifTableXtnd
Page 384 and 385:
Page 386 and 387:
Traps and MIBsObject OIDospfIfAuthT
Page 388 and 389:
Traps and MIBs388 Administration of
Page 390 and 391:
Configuring the G350 using the Avay
Page 392 and 393:
Page 394 and 395:
Page 396 and 397:
Page 398 and 399:
Page 400 and 401:
Page 402 and 403:
Page 404 and 405:
Page 406 and 407:
Page 408 and 409:
Page 410 and 411:
Page 412 and 413:
Page 414 and 415:
Page 416 and 417:
Page 418 and 419:
Page 420 and 421:
Page 422 and 423:
Page 424 and 425:
Page 426 and 427:
Page 428 and 429:
Configuring the G350 using the GIW2
Page 430 and 431:
Page 432 and 433:
Page 434 and 435:
Page 436 and 437:
Page 438 and 439:
Page 440 and 441:
IndexCommands, (continued)autoneg .
Page 442 and 443:
IndexCommands, (continued)show-rule
Page 444 and 445:
IndexHHello packets . . . . . . . .
Page 446 and 447:
IndexPolicy-based routingapplicatio
Page 448 and 449:
Indexset vlan . . . . . . . . . . .
Page 450:
Index450 Administration of the Avay
show all

Administration of the Avaya G350 Media Gateway - Avaya Support

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?