Administration of the Avaya G350 Media Gateway - Avaya Support

Version management●●●●●●●●●●●Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G350Manager software from a TFTP server.Use the copy tftp module command, followed by the module number of the moduleyou want to upgrade, to upgrade the firmware on a media module from a TFTP server.Use the copy tftp SW_imageA command to upgrade the G350 firmware into Bank Afrom a TFTP server.Use the copy tftp SW_imageB command to upgrade the G350 firmware into Bank Bfrom a TFTP server.Use the copy ftp EW_archive command to upgrade the Java applet for Avaya G350Manager software from an FTP server.Use the copy ftp module command, followed by the module number of the module youwant to upgrade, to upgrade the firmware on a media module from an FTP server.Use the copy ftp SW_imageA command to upgrade the G350 firmware into Bank Afrom an FTP server.Use the copy ftp SW_imageB command to upgrade the G350 firmware into Bank Bfrom an FTP server.Use the copy tftp EW_archive command to upgrade the Java applet for Avaya G350Manager software from a TFTP server.Use the copy tftp module command, followed by the module number of the moduleyou want to upgrade, to upgrade the firmware on a media module from a TFTP server.Use the copy tftp SW_imageA command to upgrade the G350 firmware into Bank Afrom a TFTP server.● Use the copy tftp SW_imageB command to upgrade the G350 firmware into Bank Bfrom a TFTP server.When using FTP or TFTP commands, you must use the specific path to the file on the FTP orTFTP server according to the home directory of the service (FTP or TFTP) that you are using.For example, to upgrade the firmware of an MM312 media module in slot 3 from a TFTP serverwith the IP address 192.1.1.10, where the home directory is c:\home\ftp\ and the upgrade file islocated in the directory c:\home\ftp\version, use the following command:copy tftp module \version\mm312v51.fdl 192.1.1.10 3Note:Note:Note:When uploading firmware from the S8300, use only the file name, without thedirectory path, in the command line. Otherwise, the procedure will fail. Forinstance, in the example above, you must use the following command:copy tftp module mm312v51.fdl 192.1.1.10 3Note:When uploading firmware from the S8300 using TFTP, you may need to enableTFTP service in the Set LAN Security parameters of your web server.Issue 3 January 2005 59