Administration of the Avaya G350 Media Gateway - Avaya Support

Managing login permissions●●Use the set port dot1x max-req command, followed by the module and port number(or range of ports) and a number from 1 to 10, to set the maximum number of times theport tries to retransmit requests to the Authenticated Station before the session isterminated for a specific port or ports.Use the set port dot1x server-timeout command, followed by the module andport number (or range of ports) and a time period in seconds (1 to 65535) to set the servertimeout (the time to wait for a reply from the Authentication Server) per port.Displaying 802.1x parametersYou can use the following commands to display 802.1x parameters:●●Use the show dot1x command to display the system 802.1x parameters, includingwhether 802.1x is enabled or disabled on the G350.Use the show port dot1x command to display all the configurable values associatedwith the authenticator port access entity (PAE) and backend authenticator. To displayvalues for a particular port, type the module and port numbers after the command. If youdo not enter a module and port number, the command displays values for all ports onwhich 802.1x can be configured. For example:G350-001(super)# show port dot1xPort Auth BEnd Port Port Re Quiet ReAuth Server Supp Tx MaxNumber State State Control Status Auth Priod Priod Tmeout Tmeout Priod Req------ -------- ------ -------- ------ ---- ----- ------ ------ ------ ----- --6/1 Authed Idle Auto Disa 60 100 30 30 30 30 26/2 Authed Idle Auto Disa 60 100 30 30 30 30 26/3 Authed Idle Auto Disa 60 100 30 30 30 30 26/4 Authed Idle Auto Disa 60 100 30 30 30 30 26/5 Authed Idle Auto Disa 60 100 30 30 30 30 26/6 Authed Idle Auto Disa 60 100 30 30 30 30 2Table 1 lists and describes the columns in the show port dot1x display.Issue 3 January 2005 45