Administration of the Avaya G350 Media Gateway - Avaya Support
13.07.2015 • Views
Share Embed Flag

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

Administration of the Avaya G350 Media Gateway - Avaya Support

SHOW MORE
SHOW LESS
ePAPER READ
DOWNLOAD ePAPER
downloads.avaya.com

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

START NOW

Accessing <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong>To access <strong>the</strong> <strong>G350</strong> CLI via telnet through a dialup connection from a remote location via <strong>the</strong>S8300:1. Connect a USB modem to ei<strong>the</strong>r <strong>of</strong> <strong>the</strong> two USB ports on <strong>the</strong> <strong>Avaya</strong> S8300 <strong>Media</strong> Server. Itis recommended to use a Multitech MultiModem USB, MT5634ZBA-USB-V92.2. Use <strong>the</strong> <strong>Avaya</strong> Maintenance Web Interface (MWI) to configure <strong>the</strong> USB port on <strong>the</strong> S8300for modem use. For instructions, see Installation and Upgrades for <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong><strong>Gateway</strong>, 03-300394.3. From a remote computer, create a dialup network connection to <strong>the</strong> S8300. Use <strong>the</strong> TCP/IPand PPP protocols to create <strong>the</strong> connection.4. Open any standard telnet program on <strong>the</strong> remote computer.5. Enter <strong>the</strong> command telnet, followed by <strong>the</strong> IP address <strong>of</strong> <strong>the</strong> S8300 USB port to which<strong>the</strong> modem is connected.6. Enter <strong>the</strong> command telnet, followed by <strong>the</strong> PMI <strong>of</strong> <strong>the</strong> <strong>G350</strong>.Accessing <strong>Avaya</strong> IWThe <strong>Avaya</strong> Installation Wizard (<strong>Avaya</strong> IW) is a web-based installation wizard that is used with<strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong> to perform initial configuration tasks and to upgrade s<strong>of</strong>twareand firmware. The <strong>Avaya</strong> IW is designed for use with systems that include an S8300 <strong>Media</strong>Server, operating in ei<strong>the</strong>r ICC or LSP mode. See The <strong>Media</strong> <strong>Gateway</strong> Controller (MGC) onpage 52.Specifically, you can perform <strong>the</strong> following tasks with <strong>the</strong> <strong>Avaya</strong> IW:● Configure PMI information — see Configuring <strong>the</strong> Primary Management Interface (PMI) onpage 50● Configure SNMP information — see Configuring SNMP on page 119● Configure E<strong>the</strong>rnet interfaces — see Configuring E<strong>the</strong>rnet ports on page 61●●●●Configure primary and secondary <strong>Media</strong> <strong>Gateway</strong> Controllers — see The <strong>Media</strong> <strong>Gateway</strong>Controller (MGC) on page 52Install license and password filesInstall s<strong>of</strong>tware and firmware upgrades — see S<strong>of</strong>tware and firmware upgrades onpage 57Enable and configure <strong>the</strong> USB ports <strong>of</strong> <strong>the</strong> S8300 for modem use● Enable <strong>the</strong> <strong>G350</strong> for modem use — see Configuring <strong>the</strong> <strong>G350</strong> for modem use on page 77●●●Configure <strong>G350</strong> telephony and trunk parametersConfigure alarmsChange your password32 <strong>Administration</strong> <strong>of</strong> <strong>the</strong> <strong>Avaya</strong> <strong>G350</strong> <strong>Media</strong> <strong>Gateway</strong>

logo

products

Resources

Company

Terms of service
Privacy policy
Cookie policy
Cookie settings
Imprint
Change language
Made with love in Switzerland
© 2024 Yumpu.com all rights reserved

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!